Bug #10813
closed
VM creation through hammer on ESX does not consider specific NIC type
Description
New VM creation on ESX does not consider the specified NIC type. This issue occurs only through hammer CLI, web client works fine.
Issue is related to Bug#4307.
Command used:
hammer -v --show-ids host create --name mkforeman2 --hostgroup-id 1 --operatingsystem-id 6 --subnet-id 6 --compute-resource-id 13 --provision-method build --compute-attributes cpus="1",memory_mb="2048",cluster="hedvigcl2" --volume="size_gb=30,datastore=ds-esxi55d-a" --architecture-id 1 --domain-id 1 --root-password Dobvus12 --partition-table-id 1 --interface="network=VLAN20,NIC type=VMXNET 3" --medium-id 7
It still creates vm with E1000 instead of VMXNET3.
Updated by Dominic Cleal almost 9 years ago
- Status changed from New to Feedback
Could you please re-test on a newer release? We're not supporting 1.5.3 any more. Please try 1.8.1 and Hammer 0.2.0.
Updated by Anonymous about 7 years ago
- Status changed from Feedback to Resolved
should by fixed by now