Project

General

Profile

« Previous | Next » 

Revision 87d7c2ab

Added by Ewoud Kohl van Wijngaarden over 1 year ago

i18n - extracting new, pulling from tx

View differences:

app/assets/javascripts/locale/ko/app.js
var locales = locales || {}; locales['ko'] = {"domain":"app","locale_data":{"app":{"":{"Project-Id-Version":"Foreman","Report-Msgid-Bugs-To":"","POT-Creation-Date":"2022-07-29 15:08+0530","PO-Revision-Date":"2013-04-24 11:26+0000","Last-Translator":"DaeHyung Lee <daehyung@gmail.com>, 2015","Language-Team":"Korean (http://www.transifex.com/foreman/foreman/language/ko/)","MIME-Version":"1.0","Content-Type":"text/plain; charset=UTF-8","Content-Transfer-Encoding":"8bit","Language":"ko","Plural-Forms":"nplurals=1; plural=0;","lang":"ko","domain":"app","plural_forms":"nplurals=1; plural=0;"},"Failed to fetch: ":["가져오는데 실패했습니다: "],"Sorry but no templates were configured.":["죄송합니다. 설정된 템플릿이 없습니다. "],"Success":["성공 "],"Warning":["경고 "],"Error":["오류 "],"Unknown power state":[""],"Exit Full Screen":["전체 화면에서 나가기 "],"No matches found":[""],"physical @ NAT %s":["물리 @ NAT %s"],"physical @ bridge %s":["물리 @ 브리지 %s"],"Loading interfaces information ...":["인터페이스 정보 로드 중..."],"Error loading interfaces information: %s":["인터페이스 정보 로드 오류: %s"],"Loading virtual machine information ...":["가상 머신 정보 로딩 중 ..."],"Loading parameters...":["매개 변수 로딩 중..."],"No subnets":["서브넷이 없음 "],"Error generating IP: %s":["IP 생성 오류: %s"],"Warning: This combination of loader and OS might not be able to boot.":[""],"Manual configuration is needed.":[""],"Interface":["인터페이스"],"Primary":["기본 "],"Provisioning":["프로비저닝"],"Managed":["관리됨 "],"Some other interface is already set as primary. Are you sure you want to use this one instead?":["이미 다른 인터페이스가 기본 인터페이스로 설정되어 있습니다. 이 인터페이스를 대신 사용하시겠습니까?"],"Some other interface is already set as provisioning. Are you sure you want to use this one instead?":["이미 다른 인터페이스가 프로비저닝 인터페이스로 설정되어 있습니다. 이 인터페이스를 대신 사용하시겠습니까?"],"virtual attached to %s":["%s에 연결된 가상 머신"],"virtual":["가상"],"physical":["물리"],"Create Host":[""],"Build":["빌드 "],"Reboot and build":["다시 시작 및 빌드 "],"Filter":["필터 "],"Select All":["모두 선택 "],"All items":["전체 항목 "],"Selected items":["선택한 항목 "],"Deselect All":["모든 선택 해제 "],"Select this since it belongs to a host":["호스트에 속해 있으므로 이를 선택합니다 "],"This is used by a host":["이는 호스트에 의해 사용됩니다 "],"This is inherited from parent":["이는 부모로 부터 상속됩니다"],"Parent is already selected":["부모가 이미 선택되어 있습니다 "],"Active":["활성화"],"pending":["보류 중 "],"valid":["유효함"],"can't be blank":["빈 칸으로 두지 마십시오. "],"is invalid":["유효하지 않음 "],"Internal Server Error: the server was unable to finish the request. ":[""],"This may be caused by unavailability of some required service, incorrect API call or a server-side bug. ":[""],"There may be more information in the server's logs.":[""],"User account is disabled, please contact your administrator":[""],"Admin permissions required":["관리 권한이 필요합니다 "],"%{resource_name} not found by id '%{id}'":["%{resource_name}을 ID '%{id}'로 찾을 수 없습니다 "],"Missing one of the required permissions: %s":["필요한 권한 중 하나가 없습니다: %s"],"unknown permission for %s":["%s에 대해 알 수 없는 권한 "],"unknown parent permission for %s":["%s에 대해 알 수 없는 부모 권한"],"List all architectures":["모든 아키텍처 목록 나열 "],"List all architectures for operating system":["운영 체제의 모든 아키텍처 목록 나열 "],"ID of operating system":["운영 체제 ID "],"Show an architecture":["아키텍처 표시"],"Operating system IDs":["운영 체제 ID "],"Create an architecture":["아키텍처 생성 "],"Update an architecture":["아키텍처 업데이트 "],"Delete an architecture":["아키텍처 삭제"],"List all audits":["모든 감사를 나열 "],"List all audits for a given host":["지정된 호스트의 모든 감사를 나열 "],"Show an audit":["감사 보기 "],"List external authentication sources":[""],"List external authentication sources per location":[""],"List external authentication sources per organization":[""],"Show an external authentication source":[""],"Update an external authentication source":[""],"List internal authentication sources":[""],"Show an internal authentication source":[""],"List all LDAP authentication sources":["모든 LDAP 인증 소스 나열 "],"List LDAP authentication sources per location":[""],"List LDAP authentication sources per organization":[""],"Show an LDAP authentication source":["LDAP 인증 소스 표시"],"The hostname of the LDAP server":[""],"defaults to 389":["389로 기본 설정 "],"required if onthefly_register is true":["onthefly_register가 Ture인 경우 필요합니다 "],"sync external user groups on login":["로그인 시에 외부 사용자 그룹 동기화"],"groups base DN":["그룹 기본 DN"],"use NIS netgroups instead of posix groups, applicable only when server_type is posix or free_ipa":[""],"type of the LDAP server":["LDAP 서버 유형"],"LDAP filter":["LDAP 필터 "],"Create an LDAP authentication source":["LDAP 인증 소스 생성 "],"Update an LDAP authentication source":["LDAP 인증 소스 업데이트 "],"Test LDAP connection":["LDAP 연결 테스트"],"Delete an LDAP authentication source":["LDAP 인증 소스 삭제 "],"List all authentication sources":[""],"List all authentication sources per location":[""],"List all authentication sources per organization":[""],"List all autosign entries":["모든 자동 서명 항목 나열 "],"Create autosign entry":[""],"Autosign entry name":[""],"Delete autosign entry":[""],"Foreman API v2 is currently the default API version.":["Foreman API v2가 현재 기본 API 버전입니다."],"Set the current location context for the request":[""],"Set the current organization context for the request":[""],"Page number, starting at 1":["1 부터 페이지 번호 "],"Number of results per page to return, 'all' to return all results":[""],"filter results":["필터 결과 "],"Sort and order by a searchable field, e.g. '<field> DESC'":[""],"REPLACE locations with given ids":["지정된 ID로 위치를 변경합니다 "],"REPLACE organizations with given ids.":["지정된 ID로 조직을 변경합니다 "],"Scope by locations":["위치 별 범위 "],"Scope by organizations":["조직 별 범위 "],"use if you want update locked templates":[""],"determines when the template should associate objects based on metadata, new means only when new template is being created, always means both for new and existing template which is only being updated, never ignores metadata":[""],"lock imported templates (false by default)":[""],"makes the template default meaning it will be automatically associated with newly created organizations and locations (false by default)":[""],"List all bookmarks":["모든 북마크 목록 나열 "],"Show a bookmark":["북마크 표시 "],"Create a bookmark":["북마크 생성 "],"Update a bookmark":["북마크 업데이트 "],"Delete a bookmark":["북마크 삭제 "],"List all global parameters":[""],"Display hidden values":[""],"Show a global parameter":["글로벌 매개 변수 표시 "],"Type of value":[""],"Create a global parameter":["글로벌 매개 변수 생성 "],"Update a global parameter":["글로벌 매개 변수 업데이트 "],"Delete a global parameter":["글로벌 매개 변수 삭제 "],"List of compute attributes for provided compute profile and compute resource":[""],"List of compute attributes for compute resource":[""],"List of compute attributes for compute profile":[""],"List of compute attributes":[""],"ID of compute profile":[""],"ID of compute_resource":[""],"Show a compute attributes set":[""],"Create a compute attributes set":["컴퓨팅 속성 세트 생성 "],"Update a compute attributes set":["컴퓨팅 속성 세트 업데이트 "],"List of compute profiles":["컴퓨터 프로파일 목록 "],"Show a compute profile":["컴퓨터 프로파일 표시 "],"Create a compute profile":["컴퓨터 프로파일 생성 "],"Update a compute profile":["컴퓨터 프로파일 업데이트 "],"Delete a compute profile":["컴퓨터 프로파일 삭제 "],"List all compute resources":["모든 컴퓨터 리소스 목록 나열 "],"Show a compute resource":["컴퓨터 리소스 표시 "],"Providers include %{providers}":["공급자에 %{providers}이(가) 포함되어 있습니다"],"URL for %{providers_requiring_url}":[""],"Username for oVirt, EC2, VMware, OpenStack. Access Key for EC2.":["oVirt, EC2, VMware, OpenStack의 사용자 이름. EC2의 액세스 키."],"Password for oVirt, EC2, VMware, OpenStack. Secret key for EC2":["oVirt, EC2, VMware, OpenStack의 암호. EC2의 비밀 키"],"for oVirt, VMware Datacenter":["oVirt, VMware Datacenter의 경우"],"for oVirt only, ID or Name of quota to use":[""],"for oVirt only":[""],"for AzureRm eg. 'eastus' and for EC2 only. Use '%s' for EC2 GovCloud region":[""],"for OpenStack and AzureRm only":[""],"for OpenStack (v3) only":[""],"for VMware":["VMware의 경우"],"for Libvirt and VMware only":["Libvirt 및 VMware만 해당"],"for Libvirt and oVirt only":[""],"enable caching, for VMware only":[""],"Project id for GCE only":[""],"Email for GCE only":[""],"Certificate path for GCE only":[""],"for GCE only":[""],"Create a compute resource":["컴퓨터 리소스 생성 "],"Update a compute resource":["컴퓨터 리소스 업데이트 "],"Delete a compute resource":["컴퓨터 리소스 삭제 "],"List available images for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 이미지 나열 "],"List available clusters for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 클러스터 나열 "],"List available flavors for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 종류 나열"],"List available folders for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 폴더 나열 "],"List available zone for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 영역 나열"],"List available networks for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 네트워크 나열 "],"List available networks for a compute resource cluster":["컴퓨터 리소스 클러스터에 대해 사용 가능한 네트워크 나열 "],"List available vnic profiles for a compute resource, for oVirt only":[""],"List resource pools for a compute resource cluster":["컴퓨터 리소스 클러스터의 리소스 풀 목록 나열 "],"List attributes for a given storage domain":["지정된 스토리지 도메인에 대한 속성 나열 "],"List storage domains for a compute resource":["컴퓨터 리소스의 스토리지 도메인 목록 나열 "],"List attributes for a given storage pod":["지정된 스토리지 포드에 대한 속성 나열"],"List storage pods for a compute resource":["컴퓨터 리소스의 스토리지 포드 나열"],"List available security groups for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 보안 그룹 나열"],"Associate VMs to Hosts":["VM을 호스트에 연결 "],"Associating VMs is not supported for this compute resource":[""],"Refresh Compute Resource Cache":[""],"Successfully refreshed the cache.":[""],"Failed to refresh the cache.":[""],"Cache refreshing is not supported for %s":[""],"List available virtual machines for a compute resource":[""],"Show a virtual machine":[""],"Virtual machine was not found by id %{vm_id}":[""],"Power a Virtual Machine":[""],"%{action} %{vm}":[""],"stopping":[""],"starting":[""],"Delete a Virtual Machine":[""],"%s VM failed while processing: check logs for more details.":[""],"No VMs matched any host":[""],"List all reports":["모든 보고서 나열 "],"Show a report":["보고서 표시 "],"Hostname or certname":["호스트 이름 또는 인증서 이름 "],"UTC time of report":["보고서의 UTC 시간"],"Hash of status type totals":["상태 유형의 해시 합계 "],"Hash of report metrics, can be just {}":["보고서 메트릭스의 해시는 {}이 될 수 있습니다 "],"Optional array of log hashes":["로그 해시 옵션 배열 "],"Create a report":["보고서 생성 "],"Delete a report":["보고서 삭제 "],"Show the last report for a host":["호스트의 마지막 보고서 표시"],"Get dashboard details":["대시보드 상세 정보 얻기 "],"Total hosts count":[""],"Hosts with error state":[""],"Hosts with error state and alerts enabled":[""],"Hosts which recently applied changes":[""],"Hosts which recently applied changes successfully":[""],"Hosts which recently applied changes successfully with alerts enabled":[""],"Hosts without changes or errors":[""],"Hosts without changes or errors, with alerts enabled":[""],"Out of sync hosts":["비동기 호스트 "],"Out of sync hosts with alerts enabled":[""],"Hosts with alerts disabled":["통지가 비활성화되어 있는 호스트 "],"Hosts that had pending changes":["보류 중인 변경 사항이 있는 호스트 "],"Hosts that had pending changes with alerts enabled":[""],"Hosts without errors":[""],"Hosts without errors, with alerts enabled":[""],"Hosts without errors percent":[""],"Hosts which are not reporting":[""],"List of domains":["도메인 목록 "],"List of domains per subnet":["서브넷 별 도메인 목록"],"List of domains per location":["위치별 도메인 목록"],"List of domains per organization":["조직별 도메인 목록"],"ID of subnet":["서브넷 ID "],"Show a domain":["도메인 표시 "],"Numerical ID or domain name":["숫자로된 ID 또는 도메인 이름 "],"Display hidden parameter values":[""],"The full DNS domain name":["전체 DNS 도메인 이름 "],"Description of the domain":["도메인 설명 "],"Array of parameters (name, value)":["매개 변수 (이름, 값)의 배열 "],"Create a domain":["도메인 생성 "],"Invalid smart-proxy id":[""],"Update a domain":["도메인 업데이트 "],"Delete a domain":["도메인 삭제 "],"List all external user groups for user group":["사용자 그룹의 모든 외부 사용자 그룹 목록 나열 "],"List all external user groups for LDAP authentication source":["LDAP 인증 소스에 대한 모든 외부 사용자 그룹 나열 "],"ID or name of user group":["ID 또는 사용자 그룹 이름 "],"Show an external user group for user group":["사용자 그룹에 대한 외부 사용자 그룹 표시"],"Show an external user group for LDAP authentication source":["LDAP 인증 소스에 대한 모든 외부 사용자 그룹 표시 "],"ID or name of external user group":["ID 또는 외부 사용자 그룹 이름 "],"External user group information":["외부 사용자 그룹 정보 "],"External user group name":["외부 사용자 그룹 이름 "],"ID of linked authentication source":["연결된 인증 소스 ID "],"Create an external user group linked to a user group":["사용자 그룹에 연결된 외부 사용자 그룹 생성 "],"Update external user group":["외부 사용자 그룹 업데이트 "],"Refresh external user group":["외부 사용자 그룹 새로고침 "],"Delete an external user group":["외부 사용자 그룹 삭제 "],"ID or name external user group":["ID 또는 외부 사용자 그룹 이름 "],"List all fact values":["모든 팩트 값 나열 "],"List all fact values of a given host":["지정된 호스트의 모든 팩트 값 나열 "],"List all filters":["모든 필터 목록 나열 "],"Show a filter":["필터 표시 "],"Create a filter":["필터 생성 "],"Update a filter":["필터 업데이트 "],"Delete a filter":["필터 삭제 "],"Show available API links":["사용 가능한 API 링크 표시"],"Show status":["상태 표시 "],"List of host statuses":[""],"List all host groups":["모든 호스트 그룹 목록 나열 "],"List all host groups per location":["위치 별 모든 호스트 그룹 나열 "],"List all host groups per organization":["조직 별 모든 호스트 그룹 나열 "],"Array of extra information types to include":[""],"Show a host group":["호스트 그룹 표시 "],"Name of the host group":["호스트 그룹의 이름"],"Host group description":[""],"Parent ID of the host group":["호스트 그룹의 부모 ID"],"Compute profile ID":["컴퓨터 프로파일 ID"],"Compute resource ID":[""],"Operating system ID":["운영 체제 ID"],"Architecture ID":["아키텍처 ID"],"DHCP filename option (Grub2/PXELinux by default)":[""],"Media ID":["미디어 ID"],"Partition table ID":["파티션 테이블 ID"],"Subnet ID":["서브넷 ID"],"Subnet IPv6 ID":[""],"Domain ID":["도메인 ID"],"Realm ID":["영역 ID"],"Array of parameters":[""],"Name of the parameter":["매개 변수의 이름"],"Parameter value":["매개 변수 값"],"Root password on provisioned hosts":["프로비저닝된 호스트의 root 암호"],"Create a host group":["호스트 그룹 생성 "],"Update a host group":["호스트 그룹 업데이트 "],"Delete a host group":["호스트 그룹 삭제 "],"Cannot delete group %{current} because it has nested host groups.":["중첩된 호스트 그룹이 있기 때문에 그룹 %{current}을(를) 삭제할 수 없습니다 "],"Clone a host group":["호스트 그룹 복제 "],"Rebuild orchestration config":["오케스트레이션 구성 다시 빌드"],"Limit rebuild steps, valid steps are %{host_rebuild_steps}":[""],"Operate on child hostgroup hosts":[""],"Configuration successfully rebuilt.":["구성이 다시 빌드되었습니다."],"Configuration rebuild failed for: %s.":["다음으로 인해 구성을 다시 빌드하지 못했습니다: %s."],"List all hosts":["모든 호스트 목록 나열 "],"List all hosts for a host group":["호스트 그룹 별 모든 호스트 나열 "],"List hosts per location":["위치별 호스트 나열 "],"List hosts per organization":["조직 별 호스트 나열 "],"Only list ID and name of hosts":[""],"ID of host group":["호스트 그룹 ID "],"ID of location":["위치 ID "],"ID of organization":["조직 ID "],"Show a host":["호스트 표시 "],"not required if using a subnet with DHCP proxy":["DHCP 프록시를 갖는 서브넷을 사용할 필요가 없습니다 "],"required for managed host that is bare metal, not required if it's a virtual machine":["관리 호스트가 베어 메탈일 경우 필요하지만 가상 머신일 경우 필요하지 않습니다 "],"required if host is managed and value is not inherited from host group":["호스트가 관리되고 있으며 값이 호스트 그룹에서 상속되지 않은 경우에 필요합니다 "],"required if not imaged based provisioning and host is managed and value is not inherited from host group":["이미지 기반의 프로비저닝이 아니고 호스트가 관리되어 값이 호스트 그룹에서 상속되지 않은 경우에 필요합니다 "],"required if host is managed and custom partition has not been defined":["호스트가 관리되고 있으며 사용자 정의 파티션이 정의되고 있지 않은 경우에 필요합니다 "],"nil means host is bare metal":["nil은 호스트가 베어 메탈임을 의미합니다 "],"required if host is managed and value is not inherited from host group or default password in settings":["호스트가 관리되고 있으며 값이 호스트 그룹이나 설정의 기본값 암호에서 상속되지 않은 경우에 필요합니다 "],"Host's owner type":["호스트의 소유자 유형"],"Host's parameters (array or indexed hash)":["호스트의 매개 변수(배열 또는 인덱싱된 해시)"],"Include this host within Foreman reporting":["이 호스트를 Foreman 보고서에 포함 "],"The method used to provision the host.":[""],"True/False flag whether a host is managed or unmanaged. Note: this value also determines whether several parameters are required or not":["호스트를 관리할 지 또는 관리하지 않을지에 대한 True/False 플래그입니다. 알림: 이 값은 여러 매개 변수가 필요할 지 또는 필요하지 않을 지에 대한 여부를 결정합니다 "],"UUID to track orchestration tasks status, GET /api/orchestration/:UUID/tasks":["오케스트레이션 작업 상태를 추적하기 위한 UUID, GET /api/orchestration/:UUID/tasks"],"Additional information about this host":["호스트에 대한 추가 정보 "],"Host's network interfaces.":["호스트의 네트워크 인터페이스입니다."],"ID of interface":["인터페이스 ID"],"Additional compute resource specific attributes.":["컴퓨팅 리소스별 추가 속성입니다."],"Parameters for host's %s facet":["호스트의 %s 패싯에 대한 매개 변수"],"Create a host":["호스트 생성 "],"Overwrite existing host (true by default)":[""],"Update a host":["호스트 업데이트 "],"Delete a host":["호스트 삭제 "],"Get ENC values of host":[""],"Get status of host":["호스트 상태 가져오기 "],"status type, can be one of\\n* global\\n* configuration\\n* build\\n":["상태 유형으로, 다음 중 하나일 수 있습니다.\\n* global\\n* configuration\\n* build\\n"],"Returns string representing a host status of a given type":["지정한 유형의 호스트 상태를 나타내는 문자열을 반환합니다."],"Status %s does not exist.":[""],"Clear sub-status of host":[""],"status type\\n":[""],"Clears a host sub-status of a given type":[""],"Cannot delete global status.":[""],"Get vm attributes of host":["호스트의 vm 속성 가져오기"],"Disassociate the host from a VM":["VM에서 호스트 연결 해제 "],"Run a power operation on host":["호스트에서 전원 작업을 실행합니다 "],"power action, valid actions are (on/start), (off/stop), (soft/reboot), (cycle/reset), (state/status)":["전원 동작, 유효한 동작은 (on/start), (off/stop), (soft/reboot), (cycle/reset), (state/status)입니다."],"Power operations are not enabled on this host.":[""],"Unknown power action: available methods are %s":["알 수 없는 전원 동작: 사용 가능한 방법은 %s입니다 "],"Fetch the status of whether the host is powered on or not. Supported hosts are VMs and physical hosts with BMCs.":[""],"Timeout to retrieve the power status of the host in seconds. Default is 3 seconds.":[""],"Failed to fetch power status: %s":[""],"Boot host from specified device":["지정된 장치에서 호스트 부팅 "],"boot device, valid devices are disk, cdrom, pxe, bios":["부팅 장치, 유효한 장치는 디스크, CDROM, PXE, BIOS입니다"],"Unknown device: available devices are %s":["알 수 없는 장치: 사용 가능한 장치는 %s입니다 "],"Upload facts for a host, creating the host if required":["호스트의 팩트를 업로드하고 필요한 경우 호스트를 생성합니다 "],"hostname of the host":["호스트의 호스트 이름 "],"hash containing the facts for the host":["호스트의 팩트가 포함된 해시 "],"optional: certname of the host":["옵션: 호스트의 인증서 이름 "],"optional: the STI type of host to create":["옵션: 생성할 호스트의 STI 유형 "],"Preview rendered provisioning template content":["렌더링된 프로비저닝 템플릿 컨텐츠 미리 보기"],"Template kinds, available values: %{template_kinds}":["템플릿 종류로, 사용 가능한 값은 다음과 같습니다: %{template_kinds}"],"No template with kind %{kind} for %{host}":["종류가 %{kind}인 %{host}의 템플릿이 없습니다."],"Invalid type for host creation via facts: %s":["팩트를 통한 호스트 생성의 잘못된 유형: %s"],"A problem occurred when detecting host type: %s":["호스트 유형을 감지하는 동안 문제가 발생했습니다: %s"],"List of HTTP Proxies":[""],"Show an HTTP Proxy":[""],"Identifier of the HTTP Proxy":[""],"The HTTP Proxy name":[""],"URL of the HTTP Proxy":[""],"Username used to authenticate with the HTTP Proxy":[""],"Password used to authenticate with the HTTP Proxy":[""],"Create an HTTP Proxy":[""],"Update an HTTP Proxy":[""],"Delete an HTTP Proxy":[""],"List all images for a compute resource":["컴퓨터 리소스의 모든 이미지 목록 나열 "],"List all images for operating system":["운영 체제의 모든 이미지 목록 나열 "],"List all images for architecture":["아키텍처의 모든 이미지 목록 나열 "],"ID of compute resource":["컴퓨터 리소스 ID "],"ID of architecture":["아키텍쳐 ID "],"Show an image":["이미지 보기 "],"Template ID in the compute resource":[""],"Whether or not the image supports user data":["이미지가 사용자 데이터를 지원하는지 여부"],"Create an image":["이미지 생성 "],"Update an image":["이미지 업데이트 "],"Delete an image":["이미지 삭제"],"Assign a host to the Foreman instance":[""],"List hosts forming the Foreman instance":[""],"Unassign a given host from the Foreman instance":[""],"List all interfaces for host":["호스트의 모든 인터페이스 목록 나열 "],"List all interfaces for domain":["도메인의 모든 인터페이스 목록 나열 "],"List all interfaces for subnet":["서브넷의 모든 인터페이스 목록 나열 "],"ID or name of host":["ID 또는 호스트 이름 "],"ID or name of domain":["ID 또는 도메인 이름 "],"ID or name of subnet":["ID 또는 서브넷 이름 "],"Show an interface for host":["호스트의 인터페이스 표시 "],"ID or name of interface":["ID 또는 인터페이스 이름 "],"MAC address of interface. Required for managed interfaces on bare metal.":["인터페이스의 MAC 주소입니다. 베어 메탈에서 관리형 인터페이스에 필요합니다."],"IPv4 address of interface":[""],"IPv6 address of interface":[""],"Interface type, e.g. bmc. Default is %{default_nic_type}":["인터페이스 유형(예: bmc)입니다. 기본값은 %{default_nic_type}입니다."],"Interface's DNS name":["인터페이스의 DNS 이름"],"Foreman subnet ID of IPv4 interface":[""],"Foreman subnet ID of IPv6 interface":[""],"Foreman domain ID of interface. Required for primary interfaces on managed hosts.":["인터페이스의 Foreman 도메인 ID입니다. 관리형 호스트의 기본 인터페이스에 필요합니다."],"Device identifier, e.g. eth0 or eth1.1":["장치 식별자. 예: eth0 또는 eth1.1"],"Should this interface be managed via DHCP and DNS smart proxy and should it be configured during provisioning?":["이 인터페이스는 DHCP 및 DNS 스마트 프록시를 통해 관리하고 프로비저닝 동안 설정해야 합니까? "],"Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface.":["호스트의 FQDN을 구성하는 데 이 인터페이스를 사용하시겠습니까? 관리형 호스트마다 기본 인터페이스가 하나씩 필요합니다."],"Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface.":["이 인터페이스를 PXELinux의 TFTP(또는 이미지 기반 호스트의 SSH)에 사용하시겠습니까? 관리형 호스트마다 프로비저닝 인터페이스가 하나씩 필요합니다."],"Only for BMC interfaces.":["BMC 인터페이스만 해당합니다."],"Interface provider, e.g. IPMI. Only for BMC interfaces.":["인터페이스 공급자 (예: IPMI). BMC 인터페이스의 경우에만 사용할 수 있습니다. "],"Alias or VLAN device":["별칭 또는 VLAN 장치 "],"VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces.":["VLAN 태그입니다. 이 속성은 서브넷 VLAN ID 보다 우선합니다. 가상 인터페이스의 경우에만 사용됩니다. "],"MTU, this attribute has precedence over the subnet MTU.":[""],"Identifier of the interface to which this interface belongs, e.g. eth1. Only for virtual interfaces.":["이 인터페이스가 속한 인터페이스의 ID (예: eth1) 가상 인터페이스의 경우에만 사용할 수 있습니다. "],"Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.":["인터페이스의 본드 모드 (예: balance-rr). 본드 인터페이스에만 사용됩니다. "],"Identifiers of attached interfaces, e.g. `['eth1', 'eth2']`. For bond interfaces those are the slaves. Only for bond and bridges interfaces.":["연결된 인터페이스의 ID(예: `['eth1', 'eth2']`)입니다. 본드 인터페이스의 경우 슬레이브가 됩니다. 본드 및 브리지 인터페이스에만 적용됩니다."],"Space separated options, e.g. miimon=100. Only for bond interfaces.":["공백으로 구분된 옵션 (예: miimon=100). 본드 인터페이스의 경우에만 사용합니다. "],"Additional compute resource specific attributes for the interface.":["인터페이스의 컴퓨팅 리소스별 추가 속성입니다."],"interface information":["인터페이스 정보 "],"Create an interface on a host":["호스트에 인터페이스 생성 "],"Update a host's interface":["호스트 인터페이스 업데이트 "],"Delete a host's interface":["호스트 인터페이스 삭제 "],"a location":["위치 "],"List of email notifications":["이메일 통지의 목록"],"Mail notification interval option, e.g. Daily, Weekly or Monthly. Required for summary notification":[""],"Mail notification subscription option, e.g. Subscribe, Subscribe to my hosts or Subscribe to all hosts. Required for host built and config error state":[""],"Relevant only for audit summary notification":[""],"Show an email notification":["이메일 통지 표시"],"Numerical ID or email notification name":["숫자 ID 또는 이메일 통지 이름"],"Add an email notification for a user":[""],"User mail notification already exists. Use the update action":[""],"Update an email notification for a user":[""],"No user mail notification to update. Use the create action":[""],"Remove an email notification for a user":[""],"You do not have permission to delete a mail notification of another user":[""],"List all email notifications for a user":[""],"Interval or subscription option is missing":[""],"You do not have permission to add a mail notification to another user":[""],"Interval option is needed":[""],"Subscription option is needed":[""],"Interval option is not valid":[""],"Subscription option is not valid":[""],"Mail query is not valid":[""],"Operating system family, available values: %{operatingsystem_families}":["운영 체제 제품군. 사용 가능한 값: %{operatingsystem_families}"],"List all installation media":["모든 설치 미디어 목록 나열 "],"List all media for an operating system":["운영 체제의 모든 미디어 목록 나열 "],"List all media per location":["위치 별 모든 미디어 나열 "],"List all media per organization":["조직 별 모든 미디어 나열 "],"Show a medium":["미디어 표시 "],"Name of media":["미디어 이름"],"Create a medium":["미디어 생성 "],"Update a medium":["미디어 업데이트 "],"Delete a medium":["미디어 삭제 "],"List all hardware models":["모든 하드웨어 모델 목록 나열 "],"Show a hardware model":["하드웨어 모델 표시 "],"Create a hardware model":["하드웨어 모델 생성 "],"Update a hardware model":["하드웨어 모델 업데이트 "],"Delete a hardware model":["하드웨어 모델 삭제 "],"List all operating systems":["모든 운영 체제 목록 나열 "],"List all operating systems for nested architecture":["중첩된 아키텍처의 모든 운영 체제 목록 나열 "],"List all operating systems for nested medium":["중첩된 미디어의 모든 운영 체제 목록 나열 "],"List all operating systems for nested partition table":["중첩된 파티션 테이블의 모든 운영 체제 목록 나열 "],"List all operating systems for nested provisioning template":["중첩된 프로비저닝 템플릿의 모든 운영 체제 목록 나열 "],"ID of medium":["미디어 ID "],"ID of partition table":["파티션 테이블 ID "],"ID of template":["템플릿 ID "],"Show an operating system":["운영 체제 표시 "],"Root password hash function to use":[""],"IDs of associated architectures":["관련 아키텍처의 ID"],"IDs of associated provisioning templates":["관련 프로비저닝 템플릿의 ID"],"IDs of associated media":["관련 미디어의 ID"],"IDs of associated partition tables":["관련 파티션 테이블의 ID"],"Create an operating system":["운영 체제 생성 "],"Update an operating system":["운영 체제 업데이트 "],"Delete an operating system":["운영 체제 삭제 "],"List boot files for an operating system":["운영 체제의 부트 파일을 나열 "],"an organization":["조직 "],"List default templates combinations for an operating system":["운영 체제의 기본값 템플릿 조합 나열 "],"List operating systems where this template is set as a default":["템플릿이 기본값으로 설정되는 운영 체제를 나열 "],"ID of provisioning template":["프로비저닝 템플릿 ID "],"Show a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 표시 "],"Create a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 생성 "],"Update a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 업데이트 "],"Delete a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 삭제 "],"List all parameters for a host":["호스트의 모든 매개 변수 목록 나열 "],"List all parameters for a host group":["호스트 그룹의 모든 매개 변수 목록 나열 "],"List all parameters for a domain":["도메인의 모든 매개 변수 목록 나열 "],"List all parameters for an operating system":["운영 체제의 모든 매개 변수 목록 나열 "],"List all parameters for a location":["위치 별 모든 매개 변수 나열 "],"List all parameters for an organization":["조직 별 모든 매개 변수 나열 "],"List all parameters for a subnet":[""],"ID of host":["호스트 ID "],"ID of domain":["도메인 ID"],"Show a nested parameter for a host":["호스트의 중첩된 매개 변수 표시 "],"Show a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 표시 "],"Show a nested parameter for a domain":["도메인의 중첩된 매개 변수 표시 "],"Show a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 표시 "],"Show a nested parameter for a location":["위치의 중첩된 매개 변수 표시 "],"Show a nested parameter for an organization":["조직의 중첩된 매개 변수 표시 "],"Show a nested parameter for a subnet":[""],"ID of parameter":["매개변수 ID "],"Create a nested parameter for a host":["호스트의 중첩된 매개 변수 생성 "],"Create a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 생성 "],"Create a nested parameter for a domain":["도메인의 중첩된 매개 변수 생성 "],"Create a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 생성 "],"Create a nested parameter for a location":["위치의 중첩된 매개 변수 생성 "],"Create a nested parameter for an organization":["조직의 중첩된 매개 변수 생성 "],"Create a nested parameter for a subnet":[""],"Update a nested parameter for a host":["호스트의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a domain":["도메인의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a location":["위치의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for an organization":["조직의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a subnet":[""],"Delete a nested parameter for a host":["호스트의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a domain":["도메인의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a location":["위치의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for an organization":["조직의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a subnet":[""],"Delete all nested parameters for a host":["호스트의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for a host group":["호스트 그룹의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for a domain":["도메인의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for an operating system":["운영 체제의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameter for a location":["위치의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameter for an organization":["조직의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for a subnet":[""],"List all permissions":["모든 권한 나열 "],"Show a permission":["권한 표시 "],"List available resource types":[""],"List all Personal Access Tokens for a user":[""],"ID of the user":[""],"Show a Personal Access Token for a user":[""],"Expiry Date":[""],"Create a Personal Access Token for a user":[""],"Revoke a Personal Access Token for a user":[""],"Shows status of Foreman system and it's subcomponents":[""],"This service is available for unauthenticated users":["서비스는 인증되지 않은 사용자가 사용할 수 있습니다 "],"Shows status and version information of Foreman system and it's subcomponents":[""],"This service is only available for authenticated users":["이 서비스는 인증된 사용자만 사용할 수 있습니다 "],"List installed plugins":["설치된 플러그인 나열 "],"List provisioning templates":["프로비저닝 템플릿 목록 나열 "],"List provisioning templates per operating system":["운영 체제 별 프로비저닝 템플릿 목록 나열 "],"List provisioning templates per location":["위치별 프로비저닝 템플릿 목록 나열 "],"List provisioning templates per organization":["조직 별 프로비저닝 템플릿 목록 나열 "],"Show provisioning template details":["프로비저닝 템플릿 상세 정보 표시 "],"template name":["템플릿 이름 "],"not relevant for snippet":["조각 모음과 관련이 없습니다 "],"Array of template combinations (hostgroup_id, environment_id)":["템플릿 조합 (hostgroup_id, environment_id)의 배열 "],"Array of operating system IDs to associate with the template":["템플릿에 연결할 운영체제 ID 배열 "],"Whether or not the template is locked for editing":["편집을 위한 템플릿의 잠금 여부 "],"Create a provisioning template":["프로비저닝 템플릿 생성 "],"Import a provisioning template":[""],"template contents including metadata":[""],"Update a provisioning template":["프로비저닝 템플릿 업데이트 "],"template version":["템플릿 버전 "],"Delete a provisioning template":["프로비저닝 템플릿 삭제 "],"Update the default PXE menu on all configured TFTP servers":["설정된 모든 TFTP 서버에 있는 기본 PXE 메뉴 업데이트 "],"Clone a provision template":["프로비저닝 템플릿 복제"],"Export a provisioning template to ERB":[""],"List all partition tables":["모든 파티션 테이블 목록 나열 "],"List all partition tables for an operating system":["운영 체제의 모든 파티션 테이블 목록 나열 "],"List all partition tables per location":["위치별 모든 파티션 테이블 나열"],"List all partition tables per organization":["조직별 모든 파티션 테이블 나열"],"Show a partition table":["파티션 테이블 표시"],"Array of operating system IDs to associate with the partition table":["파티션 테이블에 연결할 운영 체제 ID 배열"],"Array of host IDs to associate with the partition table":["파티션 테이블에 연결할 호스트 ID 배열"],"Array of host group IDs to associate with the partition table":["파티션 테이블에 연결할 호스트 그룹 ID 배열"],"Create a partition table":["파티션 테이블 생성 "],"Update a partition table":["파티션 테이블 업데이트 "],"Delete a partition table":["파티션 테이블 삭제 "],"Clone a template":["템플릿 복제"],"Export a partition template to ERB":[""],"List of realms":["영역 목록 "],"Show a realm":["영역 표시 "],"Numerical ID or realm name":["숫자로된 ID 또는 영역 이름 "],"The realm name, e.g. EXAMPLE.COM":["영역 이름 예: EXAMPLE.COM"],"Realm type, e.g. FreeIPA or Active Directory":["영역 유형. 예: FreeIPA 또는 활성 디렉토리 "],"Create a realm":["영역 생성 "],"Update a realm":["영역 업데이트 "],"Delete a realm":["영역 삭제 "],"Generate global registration command":[""],"ID of the Organization to register the host in":[""],"ID of the Location to register the host in":[""],"ID of the Host group to register the host in":[""],"ID of the Operating System to register the host in. Operating system must have a `host_init_config` template assigned":[""],"ID of the Smart Proxy. This Proxy must have enabled both the 'Templates' and 'Registration' features":[""],"Set 'host_registration_insights' parameter for the host. If it is set to true, insights client will be installed and registered on Red Hat family operating systems":[""],"Set 'host_registration_remote_execution' parameter for the host. If it is set to true, SSH keys will be installed on the host":[""],"Expiration of the authorization token (in hours)":[""],"Enable insecure argument for the initial curl":[""],"Packages to install on the host when registered. Can be set by `host_packages` parameter, example: `pkg1 pkg2`":[""],"Update all packages on the host":[""],"Repository URL / details, for example for Debian OS family: 'deb http://deb.example.com/ buster 1.0', for Red Hat OS family: 'http://yum.theforeman.org/client/latest/el8/x86_64/'":[""],"URL of the GPG key for the repository":[""],"Operating system doesn't have a 'host_init_config' template assigned.":[""],"Render Global registration template":[""],"ID of the Operating System to register the host in":[""],"Global Registration Template with name %s defined via default_global_registration_item Setting not found, please configure the existing template name first":[""],"Find or create a host and render the 'Host initial configuration' template":[""],"IPv4 address, not required if using a subnet with DHCP proxy":[""],"IPv6 address, not required if using a subnet with DHCP proxy":[""],"Host's network interfaces":[""],"Unable to find 'Host initial configuration' template for host %{host} running %{os}, associate the 'Host initial configuration' template for this OS first":[""],"List all report templates":[""],"List all report templates per location":[""],"List all report templates per organization":[""],"Show a report template":[""],"Whether or not the template is added automatically to new organizations and locations":[""],"Create a report template":[""],"Import a report template":[""],"Update a report template":[""],"Delete a report template":[""],"Export a report template to ERB":[""],"Generate report from a template":[""],"Hash of input values where key is the name of input, value is the value for this input":[""],"Compress the report uzing gzip":[""],"Report format, defaults to '%s'":[""],"Generating Report template failed for: %s.":[""],"Schedule generating of a report":[""],"Compress the report using gzip":[""],"If set, scheduled report will be delivered via e-mail. Use '%s' to separate multiple email addresses.":[""],"UTC time to generate report at":[""],"Scheduling Report template failed for: %s.":[""],"Downloads a generated report":[""],"ID assigned to generating job by the schedule command":[""],"Generating of report has been canceled":[""],"Report data are not available, it has probably expired.":[""],"Report not found, please ensure you used the correct job_id":[""],"Data are available only for the user who triggered the report and administrators":[""],"List all roles":["모든 역할 나열 "],"Show a role":["역할 표시 "],"Role description":[""],"Create a role":["역할 생성 "],"Update a role":["역할 업데이트 "],"Delete a role":["역할 삭제 "],"Clone a role":[""],"Alias for setting name":[""],"Setting unique name":[""],"Setting full user readable name":[""],"The category of setting":[""],"The human readable name of settings category":[""],"Value type, that the setting accepts":[""],"Describes the purpose of the setting":[""],"Default value for the setting":[""],"Setting current value. If this setting is encypted, the value will not be returned":[""],"Is this setting readonly?":[""],"Is this setting encrypted?":[""],"If this setting needs to be changed in file, it will have the file path.":[""],"If this setting has list of possible values, this includes the list of the values.":[""],"Last updated. NOTE: this will be reset to application install time, when setting is reset to default value.":[""],"List all settings":["모든 설정 목록 나열 "],"List of all settings":[""],"Show a setting":["설정 표시"],"Information about the setting":[""],"Update a setting":["설정 업데이트 "],"Information about the updated setting":[""],"No setting value provided.":["제공된 설정 값이 없습니다."],"List all smart proxies":["모든 스마트 프록시 나열 "],"Flag to indicate whether to include status or not":[""],"Show a smart proxy":["스마트 프록시 표시"],"Flag to indicate whether to include version or not":[""],"Create a smart proxy":["스마트 프록시 생성 "],"Update a smart proxy":["스마트 프록시 업데이트 "],"Delete a smart proxy":["스마트 프록시 삭제 "],"Refresh smart proxy features":["스마트 프록시 기능 새로고침 "],"Import subnets from Smart proxy":[""],"Assign a host to the smart proxy":[""],"Get hosts forming the smart proxy":[""],"Unassign a given host from the smart proxy":[""],"List all SSH keys for a user":[""],"Show an SSH key from a user":[""],"Public SSH key":[""],"Add an SSH key for a user":[""],"Delete an SSH key for a user":[""],"List of subnets":["서브넷 목록 "],"List of subnets for a domain":["도메인의 서브넷 목록 "],"List of subnets per location":["위치별 서브넷 목록"],"List of subnets per organization":["조직별 서브넷 목록"],"Show a subnet":["서브넷 표시"],"Subnet name":["서브넷 이름 "],"Subnet description":[""],"Type or protocol, IPv4 or IPv6, defaults to IPv4":[""],"Subnet network":["서브넷 네트워크 "],"Network prefix in CIDR notation":[""],"Netmask for this subnet":["서브넷의 넷마스크 "],"Subnet gateway":[""],"Primary DNS for this subnet":["서브넷의 1차 DNS"],"Secondary DNS for this subnet":["서브넷의 2차 DNS "],"IP Address auto suggestion mode for this subnet.":[""],"External IPAM group - only relevant when IPAM is set to external":[""],"Starting IP Address for IP auto suggestion":["IP 자동 제안의 시작 IP 주소 "],"Ending IP Address for IP auto suggestion":["IP 자동 제안의 종료 IP 주소 "],"VLAN ID for this subnet":["서브넷의 VLAN ID"],"MTU for this subnet":[""],"Domains in which this subnet is part":["서브넷이 포함된 도메인 "],"Default boot mode for interfaces assigned to this subnet.":[""],"Create a subnet":["서브넷 생성 "],"Update a subnet":["서브넷 업데이트 "],"Subnet numeric identifier":["숫자로된 서브넷 식별자 "],"Delete a subnet":["서브넷 삭제 "],"Provides an unused IP address in this subnet":[""],"MAC address to reuse the IP for this host":[""],"IP addresses that should be excluded from suggestion":[""],"List of table preferences for a user":[""],"Table preference details of a given table":[""],"Name of the table":[""],"List of user selected columns":[""],"Creates a table preference for a given table":[""],"Updates a table preference for a given table":[""],"Delete a table preference for a given table":[""],"You are trying access the preferences of a different user":[""],"List all tasks for a given orchestration event":["지정된 오케스트레이션 이벤트의 모든 작업을 나열 "],"ID of config template":["구성 템플릿 ID"],"List template combination":["템플릿 조합 목록 나열 "],"host group id":["호스트 그룹 ID "],"Add a template combination":["템플릿 조합 추가 "],"Show template combination":["템플릿 조합 표시 "],"Update template combination":["템플릿 조합 업데이트"],"Delete a template combination":["템플릿 조합 삭제 "],"List template inputs":["템플릿 입력 나열"],"Show template input details":["템플릿 입력 정보 표시"],"Input name":["입력 이름"],"Input description":["입력 설명"],"Input is required":["입력 필요"],"Input is advanced":["입력이 진행됨"],"Input type":["입력 유형"],"Selectable values for user inputs":["사용자 입력으로 선택 가능한 값"],"Default value for user input":[""],"The value contains sensitive information and shouldn not be normally visible, useful e.g. for passwords":[""],"Value type, defaults to plain":[""],"For values of type search, this is the resource the value searches in":[""],"Create a template input":["템플릿 입력 생성"],"Delete a template input":["템플릿 입력 삭제"],"Update a template input":["템플릿 입력 업데이트"],"List all template kinds":["모든 템플릿 종류를 나열 "],"List all user groups":["모든 사용자 그룹 나열 "],"Show a user group":["사용자 그룹 표시"],"is an admin user group, can be modified by admins only":[""],"Create a user group":["사용자 그룹 생성 "],"Update a user group":["사용자 그룹 업데이트 "],"Delete a user group":["사용자 그룹 삭제 "],"List all users":["모든 사용자 나열 "],"List all users for LDAP authentication source":["LDAP 인증 소스에 대한 모든 사용자 나열 "],"List all users for external authentication source":[""],"List all users for user group":["사용자 그룹에 대한 모든 사용자 나열 "],"List all users for role":["역할에 대한 모든 사용자 나열 "],"List all users for location":["위치에 대한 모든 사용자 나열 "],"List all users for organization":["조직에 대한 모든 사용자 나열 "],"ID of LDAP authentication source":["LDAP 인증 소스 ID "],"ID of user group":["사용자 그룹 ID "],"ID of role":["역할 ID"],"Show a user":["사용자 표시 "],"Show the currently logged-in user":[""],"is an admin account":["관리자 계정입니다 "],"Required unless user is in an external authentication source":[""],"User's timezone":["사용자의 시간대"],"User's preferred locale":["사용자의 기본 로케일"],"Enable user's email":[""],"Required when user want to change own password":[""],"Create a user":["사용자 생성 "],"Update a user":["사용자 업데이트"],"Delete a user":["사용자 삭제 "],"You are trying to delete your own account":["자신의 계정을 삭제하려 하고 있습니다 "],"An email address is required, please update your account details":[""],"Invalid query":["잘못된 쿼리 "],"Data has been cleaned up":[""],"Administrator user account required":["관리자의 사용자 계정 필요"],"Successfully created %s.":["%s을(를) 성공적으로 생성했습니다. "],"Successfully updated %s.":["%s을(를) 성공적으로 업데이트했습니다. "],"Successfully deleted %s.":["%s을(를) 성공적으로 삭제했습니다. "],"Unknown action name for success message: %s":["성공 메세지의 알 수 없는 동작 이름: %s"],"Conflict - %s":["충돌 - %s"],"You must create at least one location before continuing.":["계속 진행하기 전 최소 하나의 위치를 생성해야 합니다. "],"You must create at least one organization before continuing.":["계속 진행하기 전 최소 하나의 조직을 생성해야 합니다. "],"OK":["확인"],"Bookmark was successfully updated":[""],"Error while trying to create resource: %s":[""],"No VMs matched any host.":[""],"%s VM was associated to a host.":[""],"Error while trying to update resource: %s":[""],"JSON VM listing is not supported for this compute resource.":["이 컴퓨팅 리소스에 대해서는 JSON VM 목록을 나열할 수 없습니다."],"VM already associated with a host":["호스트에 이미 연결된 VM"],"VM associated to host %s":["호스트 %s에 연결된 VM"],"No host found to associate this VM with":["이 VM에 연결된 호스트를 찾을 수 없음 "],"The virtual machine is being deleted.":["가상 머신이 삭제되어 있습니다. "],"Failed to set console: %s":["콘솔 설정에 실패했습니다: %s"],"%{vm} is now %{vm_state}":["%{vm}은 현재 %{vm_state}입니다 "],"failed to %{action} %{vm}":["%{vm}에 대한 %{action} 실행 실패 "],"Error - %{message}":["오류 - %{message}"],"To access %s API, you need to install the Foreman Puppet plugin":[""],"User IDs":["사용자 ID"],"Smart proxy IDs":["스마트 프록시 ID "],"Compute resource IDs":["컴퓨터 리소스 ID "],"Medium IDs":[""],"Partition template IDs":["파티션 템플릿 ID"],"Provisioning template IDs":["프로비저닝 템플릿 ID "],"Domain IDs":["도메인 ID"],"Realm IDs":["영역 ID "],"Host group IDs":["호스트 그룹 ID"],"Environment IDs":["환경 ID"],"Subnet IDs":["서브넷 ID "],"Parent ID":["부모 ID"],"List of resources types that will be automatically associated":[""],"Associated %{resource} IDs":[""],"List all :resource_id":["모두 나열 :resource_id "],"Show :a_resource":[":a_resource 표시 "],"Create :a_resource":[":a_resource 생성 "],"Update :a_resource":[":a_resource 업데이트 "],"Delete :a_resource":[":a_resource 삭제 "],"Cannot delete %{current} because it has nested %{sti_name}.":["%{current} 에는 중첩된 %{sti_name}이 있기 때문에 삭제할 수 없습니다."],"%{taxonomy} with id %{id} not found":[""],"%{taxonomy} stored in session with id %{id} not found":[""],"%s you had selected as your context has been deleted":[""],"Your session has expired, please login again":["세션이 만료되었습니다. 다시 로그인하십시오 "],"Operators":["운영자 "],"Invalid search query: %s":["잘못된 검색 쿼리: %s"],"The authentication source of your external user groups could not connect to LDAP with the provided credentials. Please verify the credentials are still valid.":[""],"An error happened trying to connect to LDAP, please verify the authentication source host is reachable from your Foreman host and is online.":[""],"The groups you added as external user groups were found. However, no users inside of them that match with your authentication source base DN and filter were found. Please verify the external user groups belong in the authentication source filter":[""],"Could not refresh external usergroups: %{e} - %{message} - %{suggestion}":[""],"There are migrations pending in the system.":[""],"No proxy selected!":["프록시를 선택하지 않았습니다."],"Invalid proxy selected!":["잘못된 프록시를 선택했습니다."],"Failed to set %{proxy_type} proxy for %{host}.":["%{host}의 %{proxy_type} 프록시를 설정하지 못했습니다."],"The %{proxy_type} proxy of the selected hosts was set to %{proxy_name}":[""],"The %{proxy_type} proxy of the selected hosts was cleared.":["선택한 호스트의 %{proxy_type} 프록시를 삭제했습니다."],"The %{proxy_type} proxy could not be set for host: %{host_names}.":[""],"The %{proxy_type} proxy of the selected hosts was set to %{proxy_name}.":["선택한 호스트의 %{proxy_type} 프록시가 %{proxy_name}(으)로 설정되었습니다."],"Puppet CA":["Puppet CA"],"There was an error rendering the %{name} template: %{error}":["%{name} 템플릿을 렌더링하는 도중 오류가 발생했습니다: %{error}"],"URL in :url parameter is missing a scheme, please set http:// or https://":[""],"Proxy lacks one of the following features: 'Registration', 'Templates'":[""],"All mismatches between hosts and %s have been fixed":["호스트와 %s 간의 모든 불일치가 수정되었습니다 "],"All mismatches between hosts and locations/organizations have been fixed":["호스트와 위치/조직 간의 모든 불일치가 수정되었습니다 "],"All hosts previously with no %{single} are now assigned to %{name}":["%{single}이 없는 이전의 모든 호스트는 %{name}에 할당됩니다"],"Selected hosts are now assigned to %s":["선택된 호스트는 %s에 할당되어 있습니다 "],"unable to find %{type} template for %{host} running %{os}":[""],"Successfully deleted report.":["보고서를 성공적으로 삭제했습니다."],"External user group %{name} refreshed":["외부 사용자 그룹 %{name}이(가) 새로고침되었습니다 "],"External user group %{name} could not be refreshed.":[""],"Filter overriding has been disabled":[""],"Unable to find registration template for host %{host} running %{os}":[""],"Registration token is missing or invalid.":[""],"Host is not associated with an operating system":[""],"The following fields would need reviewing":["다음 필드를 확인해야 합니다 "],"Cannot delete group %{current} because it has nested groups.":["그룹 %{current}에는 중첩된 그룹이 있기 때문에 삭제할 수 없습니다. "],"Disk":["디스크"],"CDROM":["CDROM"],"PXE":["PXE"],"BIOS":["BIOS"],"The marked fields will need reviewing":["표시된 필드는 확인해야 합니다 "],"Enabled %s for reboot and rebuild":["다시 부팅하고 다시 빌드하기 위해 %s을(를) 활성화 "],"Enabled %s for rebuild on next boot, but failed to power cycle the host":[""],"Failed to reboot %s.":["%s 재부팅에 실패했습니다. "],"Enabled %s for rebuild on next boot":["다음 부팅시 다시 빌드하기 위해 %s 활성화 "],"Failed to enable %{host} for installation: %{errors}":["설치를 위한 %{host} 활성화에 실패했습니다: %{errors}"],"Canceled pending build for %s":["%s의 보류 중인 빌드가 취소됨 "],"Failed to cancel pending build for %{hostname} with the following errors: %{errors}":[""],"%{host} is about to %{action}":["%{host}는 즉시 %{action}을 실행합니다 "],"Failed to %{action} %{host}: %{e}":["%{host}의 %{action} 실행 실패: %{e}"],"%{host} now boots from %{device}":["%{host}가 %{device}에서 부팅합니다 "],"Failed to configure %{host} to boot from %{device}: %{e}":["%{device}에서 부팅하도록 %{host} 설정에 실패했습니다: %{e}"],"Foreman now manages the build cycle for %s":["Foreman은 %s의 빌드 주기를 관리합니다 "],"Foreman now no longer manages the build cycle for %s":["Foreman은 %s의 빌드 주기를 더이상 관리하지 않습니다 "],"Failed to modify the build cycle for %s":["%s의 빌드 주기 변경에 실패했습니다 "],"%s has been disassociated from VM":["%s이(가) VM에서 연결 해제되었습니다 "],"Host %s is not associated with a VM":["호스트 %s는 VM에 연결되어 있지 않습니다 "],"No parameters were allocated to the selected hosts, can't mass assign":[""],"Updated all hosts!":["모든 호스트를 업데이트했습니다! "],"%s Parameters updated, see below for more information":["%s 매개 변수가 업데이트되었습니다. 보다 자세한 내용은 아래에서 참조하십시오 "],"No host group selected!":["선택된 호스트 그룹이 없습니다!"],"Updated hosts: changed host group":["업데이트된 호스트: 변경된 호스트 그룹 "],"No owner selected!":["소유자를 선택하지 않았습니다."],"Updated hosts: changed owner":["업데이트된 호스트: 변경된 소유자"],"Failed to set power state for %s.":["%s의 전원 상태를 설정하지 못했습니다."],"The power state of the selected hosts will be set to %s":["선택한 호스트의 전원 상태가 %s(으)로 설정됩니다."],"%{config_type} rebuild failed for host: %{host_names}.":[""],"Configuration successfully rebuilt":[""],"Failed to redeploy %s.":["%s을(를) 재배포하지 못했습니다."],"The selected hosts were enabled for reboot and rebuild":["선택한 호스트의 재부팅 및 재배포가 활성화되어 있습니다."],"The selected hosts will execute a build operation on next reboot":["선택된 호스트는 다음 부팅 시 빌드 작업을 수행합니다 "],"The following hosts failed the build operation: %s":["다음 호스트는 빌드 작업을 실패했습니다: %s"],"Destroyed selected hosts":["선택된 호스트 삭제"],"The following hosts were not deleted: %s":["다음 호스트는 삭제되지 않았습니다: %s"],"Updated hosts: Disassociated from VM":["업데이트된 호스트: VM에서 연결 해제 "],"Hosts with errors":["오류가 있는 호스트 "],"Active Hosts":["활성 호스트 "],"Pending Hosts":["보류 중인 호스트 "],"Hosts which didn't report in the last %s":[""],"Hosts with notifications disabled":["통지가 비활성화되어 있는 호스트 "],"invalid type: %s requested":["잘못된 유형: %s 필요 "],"Something went wrong while changing host type - %s":["호스트 유형을 변경하는 도중 문제가 발생했습니다 - %s"],"No hosts were found with that id, name or query filter":[""],"No hosts selected":["선택된 호스트가 없음 "],"Something went wrong while selecting hosts - %s":["호스트를 선택하는 도중 문제가 발생했습니다 - %s "],"%s selected hosts":["%s 선택된 호스트 "],"The following hosts were not %{action}: %{missed_hosts}":["다음 호스트에서 %{action}이 실행되지 않았습니다: %{missed_hosts}"],"No or invalid power state selected!":["전원 상태를 선택하지 않았거나 잘못 선택했습니다."],"The %{proxy_type} proxy of the selected hosts was cleared":[""],"No templates found":[""],"HTTP Proxy connection successful.":[""],"%{user} Downloaded %{key} as pem file":[""],"Successfully recreated":[""],"Could not recreate a new SSH key":[""],"Successfully delete %s":[""],"Could not delete %s":[""],"Report is going to be rendered at %s and it will be delivered via e-mail once ready.":[""],"Report is being rendered, it will be delivered via e-mail.":[""],"Could not generate the report, check the form for error messages":[""],"Filters overriding has been disabled":[""],"No changes found when refreshing features from %s.":["%s에서 기능을 새로 고침시 변경 사항을 찾을 수 없습니다. "],"Successfully refreshed features from %s.":["%s에서 기능을 성공적으로 새로고침했습니다. "],"No TFTP feature":["TFTP 기능 없음"],"Core and proxy versions do not match. foreman: %{foreman_version}, foreman-proxy: %{proxy_version}":[""],"No new IPv4 subnets found":[""],"No IPv4 subnets selected":[""],"Imported IPv4 Subnets":[""],"No host could be found for rendering the template":["템플릿을 렌더링할 호스트를 찾을 수 없습니다."],"Template locked":["템플릿 잠금 "],"Template unlocked":["템플릿 잠금 해제 "],"iPXE intermediate script '%s' not found":[""],"Global iPXE template '%s' not found":[""],"iPXE local boot template '%s' not found":[""],"Failed to get a new realm OTP. Terminating the build!":["새로운 영역 OTP를 가져오는데 실패했습니다. 빌드를 종료합니다!"],"An error occurred.":[""],"Unable to find user-data or cloud-init template for host %{host} running %{os}":[""],"Could not find host for request %{request_ip}":[""],"Logout":["로그아웃 "],"You cannot delete this user while logged in as this user":[""],"You must stop impersonation before deleting a user that has active impersonation session.":[""],"User is disabled":[""],"You impersonated user %s, to cancel the session, click the impersonation icon in the top bar.":[""],"You are already impersonating, click the impersonation icon in the top bar before starting a new impersonation.":[""],"You now act as %s again.":[""],"No active impersonate session.":[""],"Too many tries, please try again in a few minutes.":[""],"Incorrect username or password":["잘못된 사용자 이름 또는 암호 "],"Some imported user account details cannot be saved: %s":[""],"Logged out - See you soon":["로그 아웃했습니다 "],"Email address is missing":["이메일 주소가 누락되었습니다."],"Unable to send email, check server logs for more information":["이메일을 보낼 수 없습니다. 서버 로그에서 자세한 내용을 확인하십시오."],"Email was sent successfully":["이메일을 보냈습니다."],"You have already logged in":[""],"CSRF protection token expired, please log in again":[""],"Unauthorized. You do not have the required permission %s.":[""],"Could not resolve ID.":[""],"Cannot resolve network type for %s":[""],"in %s":["%s"],"%s ago":["%s 전 "],"N/A":["해당 없음 "],"Delete":["삭제 "],"Are you sure?":["정말로 삭제하시겠습니까? "],"Export":["내보내기"],"Export to CSV":["CSV로 내보내기"],"Help":["도움말"],"Documentation":["문서 "],"None found":["찾을 수 없습니다."],"Yes":["제공됨"],"No":["아니오 "],"This email was sent from Foreman instance %{title} identified by %{uuid}":[""],"This email was sent from Foreman identified by UUID %{uuid}":[""],"NA":["해당 없음 "],"Missing(ID: %s)":[""],"[empty]":[""],"Template content changed %s":[""],"Password has been changed":[""],"Owner changed to %s":["소유자가 %s로 변경되었습니다 "],"Global status changed from %{from} to %{to}":[""],"%{name} changed from %{label1} to %{label2}":["%{name} 이(가) %{label1}에서 %{label2}로 변경되었습니다 "],"Added %{from} to %{to}":[""],"Removed %{from} to %{to}":[""],"User":["사용자 "],"Hosts":["호스트"],"Audits":["감사 "],"Host details":["호스트 상세 정보 "],"Associated Host":[""],"Example value is <code>DOMAIN\\\\foreman</code>":[""],"Example value is <code>uid=foreman,cn=users,cn=accounts,dc=example,dc=com</code>":[""],"Example value is <code>uid=foreman,dc=example,dc=com</code>":[""],"Example value is <code>CN=Users,DC=example,DC=COM</code>":[""],"Example value is <code>cn=users,cn=accounts,dc=example,dc=com</code>":[""],"Example value is <code>dc=example,dc=com</code>":[""],"Example value is <code>CN=Users,DC=example,DC=com</code>":[""],"Example value is <code>cn=groups,cn=accounts,dc=example,dc=com</code> or <code>cn=ng,cn=compat,dc=example,dc=com</code> if you use netgroups":[""],"Create Autosign Entry":[""],"On":["활성화 "],"Off":["비활성화 "],"Unknown status: %s":[""],"Parameters that would be associated with hosts in this %s":["%s에서 호스트와 연관된 매개 변수 "],"<b>Source:</b> %{type} %{name}":["<b>소스:</b> %{type} %{name}"],"Omit parameter from classification":[""],"Foreman will not send this parameter in classification output.":[""],"Value":["값"],"Paused":["일시정지 "],"Are you sure you want to power %{act} %{vm}?":["%{vm}의 %{act}을(를) 실행하시겠습니까?"],"Are you sure you want to %{act} %{vm}?":["%{vm}의 %{act}을(를) 실행하시겠습니까?"],"Pause":["일시 정지 "],"Resume":["다시 시작 "],"Test Connection":["연결 테스트 "],"Load Datacenters":["데이터 센터 로드 "],"HTTP Proxy":[""],"Power%s":["전원%s"],"Unknown Power State":["알 수 없는 전원 상태 "],"Console":["콘솔"],"Physical (Bridge)":["물리 (브리지)"],"Virtual (NAT)":["가상 (NAT)"],"Please select a cluster":["클러스터를 선택하십시오."],"Resource pool":["리소스 풀"],"Available":[""],"Used":[""],"Host":["호스트 "],"Import as managed Host":[""],"Import as unmanaged Host":[""],"Associate VM":["VM 연결 "],"Associate VM to a Foreman host":["VM을 Foreman 호스트에 연결 "],"Missing permission":[""],"Add to dashboard":["대시보드에 추가"],"Generated at %s":["%s에 생성 "],"Manage":["관리 "],"Save positions":[""],"Reset to default":["기본값으로 다시 설정 "],"Add widgets":["위젯 추가"],"Nothing to add":["추가할 항목 없음"],"Pending changes":["보류 중인 변경 사항 "],"Out of sync":["비동기 "],"No report":["보고서가 없음 "],"Disabled alerts":[""],"Applied":["적용됨 "],"Applied|A":["A"],"Restarted":["다시 시작됨 "],"Restarted|R":["R"],"Failed":["실패 "],"Failed|F":["F"],"Failed Restarts|FR":["FR"],"Failed Restarts":["다시 시작 실패 "],"Skipped":["건너 뛰기 "],"Skipped|S":["S"],"Pending|P":["P"],"Pending":["보류 중 "],"Auto refresh on":["자동 새로 고침 켜기"],"Auto refresh off":["자동 새로 고침 끄기"],"Token expired":[""],"Build errors":[""],"Build in progress":[""],"Expand nested items":["중첩된 항목을 확장 "],"Show all %s children fact values":["모든 %s 자식 정보 값 표시 "],"Show %s fact values for all hosts":[""],"Show full value":["전체 값 표시"],"Facts Values":[""],"contains special characters":[""],"Search may fail or give you wrong results since it contains special characters that are query keywords such as < and >":[""],"Caps lock ON":["Caps Lock 켜짐"],"Change the password":["암호 변경"],"Choose a new file:":[""],"Cancel":["취소 "],"Overwrite":["덮어쓰기"],"Submit":["제출 "],"no value":["값이 없음 "],"Inherit parent (%s)":["부모 상속 (%s)"],"Remove Parameter":["매개 변수 삭제 "],"Change Group":["그룹 변경 "],"Edit Parameters":["매개 변수 편집 "],"Disable Notifications":["통지 비활성화 "],"Enable Notifications":["통지 활성화 "],"Disassociate Hosts":["호스트 연결 해제 "],"Rebuild Config":["구성 다시 빌드"],"Build Hosts":["호스트 빌드 "],"Assign Organization":["조직 지정 "],"Assign Location":["위치 지정 "],"Change Owner":["소유자 변경"],"Change Power State":["전원 상태 변경"],"Delete Hosts":["호스트 삭제 "],"Status":["상태 "],"clear":[""],"Build duration":[""],"Token":["토큰 "],"Domain":["도메인 "],"Realm":["영역 "],"IP Address":["IP 주소"],"IPv6 Address":["IPv6 주소 "],"Comment":["코멘트 "],"MAC Address":["MAC 주소 "],"Architecture":["아키텍처 "],"Operating System":["운영체제"],"PXE Loader":[""],"Host group":["호스트 그룹 "],"Boot time":[""],"Not reported":[""],"Location":["위치 "],"Organization":["조직 "],"Owner":["소유자 "],"Certificate Name":["인증서 이름 "],"Edit":["편집 "],"Edit this host":[""],"Clone":["복제 "],"Clone this host":[""],"Cancel build":["빌드 취소 "],"Cancel build request for this host":["이 호스트의 빌드 요청을 취소 "],"Enable rebuild on next host boot":["다음 호스트 부팅 시 다시 빌드를 활성화 "],"Loading power state ...":["전원 상태 로딩 중..."],"Host audit entries":["호스트 감사 항목 "],"Facts":["정보 "],"Browse host facts":["호스트 정보 검색 "],"Reports":["보고서 "],"Browse host config management reports":["호스트 구성 관리 보고서 검색"],"New UI":[""],"Switch to the new host details UI":[""],"Nest":["중첩 "],"Delete %s?":["%s을(를) 삭제하시겠습니까?"],"This group has nested groups!":["이 그룹에는 중첩된 그룹이 있습니다! "],"Please delete all nested groups before deleting it.":["제거하기 전에 중첩된 모든 그룹을 삭제하십시오. "],"inherit":["상속"],"Reminder: <strong> One host is selected </strong>":[""],"Reminder: <strong> One host is selected </strong> for query filter %{query}":[""],"%s can be changed using bulk action on the All Hosts page":[""],"view last report details":[""],"report already deleted":[""],"Select Action":["작업 선택 "],"%s - The following hosts are about to be changed":["%s - 다음 호스트는 즉시 변경됩니다 "],"Failed restarts":["다시 시작 실패 "],"Config Retrieval":["설정 검색 "],"Runtime":["런타임 "],"Found %{count} reports from the last %{days} days":["지난 %{days}일의 기간에서 %{count}개의 보고서가 발견되었습니다."],"Are you sure you want to delete host %s? This will delete the VM and its disks, and is irreversible. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Are you sure you want to delete host %s? It is irreversible, but VM and its disks will not be deleted. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Are you sure you want to delete host %s? This action is irreversible.":["%s 호스트를 삭제하시겠습니까? 이 작업은 되돌릴 수 없습니다."],"Allocation (GB)":["할당 (GB)"],"None":["없음 "],"Size":["사이즈"],"Full":["전체 "],"remove network interface":["네트워크 인터페이스 삭제 "],"Interface is up":["인터페이스가 작동 중입니다."],"Interface is down":["인터페이스가 작동하지 않습니다."],"Errors occurred, build may fail":["오류가 발생했습니다. 빌드에 실패할 수 있습니다 "],"Edit %s":["%s 편집 "],"Select desired %s proxy":["원하는 %s 프록시 선택"],"*Clear %s proxy*":["*%s 프록시 삭제*"],"Generate new random name. Visit Settings to disable this feature.":[""],"Suggest new":["새 제안 "],"Image":["이미지 "],"Image ID":["이미지 ID"],"Image ID as provided by the compute resource, e.g. ami-..":["컴퓨터 리소스에 의해 지정된 이미지 ID, 예: ami-.."],"Compute Resources":["컴퓨터 리소스 "],"Images":["이미지 "],"Create image":[""],"Active key":[""],"Key used with other compute resource":[""],"Key not connected to any compute resource":[""],"<dl><dt>String</dt> <dd>Everything turns into a string.</dd><dt>Boolean</dt> <dd>Common representation of boolean values are accepted.</dd><dt>Integer</dt> <dd>Integer numbers only, can be negative.</dd><dt>Real</dt> <dd>Accept any numerical input.</dd><dt>Array</dt> <dd>A valid JSON or YAML input, that must evaluate to an array.</dd><dt>Hash</dt> <dd>A valid JSON or YAML input, that must evaluate to an object/map/dict/hash.</dd><dt>YAML</dt> <dd>Any valid YAML input.</dd><dt>JSON</dt> <dd>Any valid JSON input.</dd></dl>":[""],"How values are validated":["값 검증 방법 "],"Unable to save":["저장할 수 없음 "],"Warning!":["경고!"],"Alert":["경고 "],"Notice":["주의 "],"Close":["종료 "],"last %s day":["마지막 %s 일 "],"Full screen":["전체 화면 "],"Puppet class":["Puppet 클래스 "],"Puppet Class":["Puppet 클래스 "],"<b>List</b> A list of the allowed values separated by comma, specified in the Validator rule field. The default value and all input values must then be one of the specified allowed value.<br/><b>Regexp</b> Validates the default value and all input values with the regular expression in the Validator rule field. E.g. <code>[0-9]+\\\\.[0-9]+</code><br/>":[""],"Validation types":["검증 유형 "],"This value is not hidden":[""],"Unhide this value":["이 값 숨기기 취소"],"Hide this value":["이 값 숨기기"],"No entries found":["항목을 찾을 수 없음 "],"Generate":[""],"You are about to unlock a locked template.":["잠긴 템플릿을 잠금 해제합니다."],"This is for every location and organization that uses it.":["해당 템플릿을 사용하는 모든 위치와 조직에서 잠금 해제됩니다."],"It is not recommended to unlock this template, as it is provided by %{vendor} and may be overwritten. Please consider cloning it instead.":["%{vendor}에서 제공하는 템플릿이며 덮어써질 수 있으므로 이 템플릿을 잠금 해제하는 것은 권장하지 않습니다. 복제하는 것이 좋습니다."],"Continue?":["계속하시겠습니까?"],"Unlock":["잠금 해제"],"Lock":["잠금"],"How templates are determined":["템플릿 지정 방법 "],"When editing a template, you must assign a list \\\\\\nof operating systems which this template can be used with. Optionally, you can \\\\\\nrestrict a template to a list of host groups.":[""],"When a Host requests a template (e.g. during provisioning), Foreman \\\\\\nwill select the best match from the available templates of that type, in the \\\\\\nfollowing order:":[""],"Operating system default":["기본값 운영 체제 "],"The final entry, Operating System default, can be set by editing the %s page.":["최종 엔트리, 운영 체제 기본값은 %s 페이지를 편집하여 설정할 수 있습니다. "],"Change Puppet CA":["Puppet CA 변경"],"revoked":["취소됨 "],"valid or pending":["유효 또는 보류 중"],"all":["모두 일치"],"%s minute ago":["%s 분 전 "],"%s day ago":["%s 일 전 "],"%s week ago":["%s 주 전 "],"%s month ago":["%s 개월 전 "],"All Reports":["전체 보고서 "],"Select a period":["기간 선택 "],"Show log messages:":["로그 메세지 표시: "],"All messages":["전체 메세지 "],"Notices, warnings and errors":["주의, 경고 및 오류 "],"Warnings and errors":["경고 및 오류 "],"Errors only":["오류만 "],"Reported by %s":[""],"Show Diff":["다른점 표시 "],"Warning! This will remove %{name} from %{number} user. are you sure?":[""],"Refresh":["새로고침 "],"Certificates":["인증서"],"Autosign":["자동 서명 "],"Import IPv4 subnets":[""],"Expire logs":["로그 만료"],"Actions":["동작 "],"Refresh features":["기능 새로 고침 "],"All":["모두"],"ERROR or FATAL":["오류 또는 치명적 오류"],"WARNING":["경고 "],"INFO or DEBUG":["정보 또는 디버그"],"Protocol":["프로토콜 "],"New Location":["새 위치 "],"New Organization":["새 조직 "],"All users":["전체 사용자 "],"Select users":["사용자 선택 "],"All smart proxies":["모든 스마트 프록시 "],"Select smart proxies":["스마트 프록시 선택 "],"All subnets":["전체 서브넷 "],"Select subnets":["서브넷 선택 "],"All compute resources":["전체 컴퓨터 리소스 "],"Select compute resources":["컴퓨터 리소스 선택 "],"All media":["전체 미디어 "],"Select media":["미디어 선택 "],"All provisioning templates":["모든 프로비저닝 템플릿"],"Select provisioning templates":["프로비저닝 템플릿 선택"],"All partition tables":["모든 파티션 테이블"],"Select partition tables":["파티션 테이블 선택"],"All domains":["전체 도메인 "],"Select domains":["도메인 선택 "],"All realms":["전체 영역 "],"Select realms":["영역 선택 "],"All environments":["전체 환경 "],"Select environments":["환경 선택 "],"All host groups":["전체 호스트 그룹 "],"Select host groups":["호스트 그룹 선택 "],"Not relevant for snippet":["조각 모음과 관련이 없습니다 "],"Default templates are automatically added to new organizations and locations":["기본 템플릿이 새 조직과 위치에 자동으로 추가됩니다."],"This template is locked. You may only change the\\\\\\n associations. Please %s it to customize.":[""],"clone":["복제 "],"Template input":["템플릿 입력"],"remove template input":["템플릿 입력 삭제"],"Plain":[""],"Search":["검색 "],"Date":["날짜 "],"Resource":["리소스 "],"Impersonate":[""],"Create RSS notifications":[""],"Clean up StoredValues":[""],"Render report %s":[""],"Render report template":[""],":foreman_url is not set, please configure in the Foreman Web UI (Administer -> Settings -> General)":[":foreman_url이 설정되어 있지 않습니다. Foreman 웹 UI를 구성하십시오(관리자 -> 설정 -> 일반)."],"Must specify a user with email enabled":["이메일이 활성화된 사용자를 지정해야 합니다 "],"Audit summary":["감사 요약"],"Must specify a valid user with email enabled":["이메일이 활성화된 유효한 사용자를 지정해야 합니다 "],"Configuration Management Summary Report - F:%{failed} R:%{restarted} S:%{skipped} A:%{applied} FR:%{failed_restarts} T:%{total}":[""],"Configuration Management Error on %s":[""],"Host %s is built":["%s 호스트가 빌드되었습니다."],"Result of report %s":[""],"Welcome to Foreman":["Foreman에 오신 것을 환영합니다 "],"Foreman test email":["Foreman 테스트 이메일"],"Error while connecting to '%{name}' LDAP server at '%{url}' during authentication":[""],"Cannot create LDAP configuration for %s without dedicated service account":["전용 서비스 계정없이 %s의 LDAP 설정을 생성할 수 없습니다 "],"Error during LDAP connection %{name} using login %{login}: %{error}":[""],"Test connection to LDAP server was successful.":["LDAP 서버에 대한 연결 테스트가 성공했습니다."],"Unable to connect to LDAP server":["LDAP 서버에 연결할 수 없습니다."],"invalid LDAP filter syntax":["잘못된 LDAP 필터 구문 "],"%s is an unknown attribute":["%s은(는) 알 수 없는 속성입니다 "],"Libvirt, oVirt and OpenStack":[""],"must provide a provider":["공급자를 지정해야 합니다 "],"unknown provider":["알 수 없는 공급자 "],"%s console is not supported at this time":["%s 콘솔은 아직 지원되지 않습니다 "],"Not implemented for %s":["%s에 대해 구현되지 않습니다 "],"Not implemented":["구현되지 않습니다"],"cannot be changed":["변경할 수 없습니다 "],"Invalid tags, must be an array of maps with key and value properties":[""],"selected image does not exist":[""],"console is not available at this time because the instance is powered off":[""],"Unable to access key":["액세스할 수 없음 "],"Invalid Google JSON key. Please verify client email & private key options are present":[""],"Certificate key is not a valid JSON":[""],"no storage pool available on hypervisor":[""],"Unable to find template %s":["템플릿 %s을 찾을 수 없습니다 "],"VM is not running!":["VM이 실행되고 있지 않습니다! "],"Unable to change VM display listen address, make sure the display is not attached to localhost only":["VM 디스플레이의 수신 주소를 변경할 수 없습니다. 디스플레이가 로컬 호스트에만 할당되지 않았는지 확인합니다 "],"Unable to connect to libvirt due to: %s. Please make sure your libvirt compute resource is reachable and that you have appropriate access permissions.":[""],"At least one volume must be specified for image-based provisioning.":["이미지 기반 프로비저닝에 대해 최소 하나의 볼륨을 지정해야 합니다. "],"Please specify volume size. You may optionally use suffix 'G' to specify volume size in gigabytes.":["볼륨 크기를 지정하십시오. 볼륨 크기를 기가 바이트 단위로 지정하려면 옵션으로 접미사 'G'를 사용할 수 있습니다. "],"must end with /v2 or /v3":[""],"No matching server groups found":[""],"Hint data is missing":[""],"Failed to deploy vm %{name}, fault: %{e}":[""],"HTTPS URL is required for API access":[""],"Datacenter was not found":[""],"Cluster ID is required to list available networks":["사용 가능한 네트워크를 나열하려면 클러스터 ID가 필요합니다 "],"VM volume attributes are not set properly":[""],"The remote system presented a public key signed by an unidentified certificate authority. If you are sure the remote system is authentic, go to the compute resource edit page, press the 'Test Connection' or 'Load Datacenters' button and submit":["원격 시스템은 미확인 인증 기관에서 서명된 공개 키를 표시합니다. 원격 시스템이 인증되어 있는지를 확인할 수 있는 경우 컴퓨터 리소스 편집 페이지로 가서 '연결 테스트' 또는 '데이터센터 로드' 버튼을 클릭하여 제출합니다 "],"Failed to create X509 certificate, error: %s":["X509 인증서 생성에 실패했습니다. 오류: %s"],"not supported by this compute resource":[""],"VNC":[""],"VMRC":[""],"Automatic":["자동"],"EFI":[""],"Persistent":[""],"Independent - Persistent":[""],"Independent - Nonpersistent":[""],"Harddisk":[""],"CD-ROM":[""],"Network":["네트워크"],"Floppy":[""],"Default":["기본값 "],"Foreman could not find a required vSphere resource. Check if Foreman has the required permissions and the resource exists. Reason: %s":[""],"The console is not available because the VM is not powered on":[""],"Could not find network %s on VMWare compute resource":[""],"The remote system presented a public key with hash %s but we're expecting a different hash. If you are sure the remote system is authentic, go to the compute resource edit page, press the 'Test Connection' or 'Load Datacenters' button and submit":["원격 시스템은 해시 %s와 함께 공개키를 표시하지만 해시는 다른 것을으로 예상합니다. 원격 시스템이 인증되어 있는지를 확인할 수 있는 경우 컴퓨터 리소스 편집 페이지로 가서 '연결 테스트' 또는 '데이터센터 로드' 버튼을 클릭하여 제출합니다 "],"Can not load datacenters due to an incorrect user name or password.":[""],"[redacted]":[""],"Audit":["감사 "],"You don't have permission %{name} with attributes that you have specified or you don't have access to specified organizations or locations":[""],"%s is not a valid DNS record type":[""],"Adding would cause a cycle!":["추가하면 사이클이 발생합니다!"],"%{record} is used by %{what}":["%{record}은(는) %{what}에 의해 사용되고 있습니다 "],"%{record} is being used by a hidden %{what} resource":["%{record}은(는) 숨겨진 %{what} 리소스에 사용 중입니다."],"Cannot find user %s when switching context":["문맥으로 전환할 때 사용자 %s을(를) 검색할 수 없음 "],"Could not find %{association} with name: %{name}":[""],"Puppet":["Puppet"],"Puppet Proxy":[""],"Use the Puppetserver configured on this Smart Proxy":[""],"Puppet proxy ID":["Puppet 프록시 ID"],"Puppet CA Proxy":[""],"Use the Puppetserver CA configured on this Smart Proxy":[""],"Puppet CA proxy ID":["Puppet CA 프록시 ID"],"Owner type needs to be one of the following: %s":["소유자 유형은 다음 중 하나이어야 합니다: %s"],"does not belong into host's organization":[""],"does not belong into host's location":[""],"There is no owner with id %d and type %s":[""],"If owner type is specified, owner must be specified too.":[""],"Unknown power management support - can't continue":["알 수 없는 전력 관리 지원 - 계속 진행할 수 없음 "],"string":["문자열"],"boolean":["부울 "],"integer":["정수 "],"real":["실제 "],"array":["어레이 "],"hash":["해시"],"yaml":["yaml"],"json":["json"],"invalid":["유효하지 않음 "],"is invalid %s":["잘못된 %s입니다 "],"%{task} task failed with the following error: %{e}":["%{task} 작업은 다음과 같은 오류로 인해 실패했습니다: %{e}"],"Failed to perform rollback on %{task} - %{e}":["%{task}에서 롤백 실행에 실패했습니다 - %{e}"],"invalid method %s":["잘못된 방식 %s"],"Receiving vm data for host '%{host}' from used compute resource '%{compute_resource}' failed: '%{exception}'.":[""],"Render user data template for %s":["%s의 사용자 데이터 템플릿 렌더링 "],"Set up compute instance %s":["컴퓨터 인스턴스 %s 설정 "],"Acquire IP addresses for %s":[""],"Query instance details for %s":["%s의 쿼리 인스턴스 상세 정보 "],"Set IP addresses for %s":[""],"Power up compute instance %s":["컴퓨터 인스턴스 %s의 파워 업 "],"Compute resource update for %s":["%s의 컴퓨터 리소스 업데이트 "],"Removing compute instance %s":["컴퓨터 인스턴스 %s 삭제 중 "],"Failed to find compute attributes, please check if VM %s was deleted":[""],"Failed to create a compute %{compute_resource} instance %{name}: %{message}\\n ":["컴퓨팅 %{compute_resource} 인스턴스 %{name}을(를) 생성하지 못했습니다: %{message}\\n "],"%{image} needs user data, but %{os_link} is not associated to any provisioning template of the kind user_data. Please associate it with a suitable template or uncheck 'User data' for %{compute_resource_image_link}.":["%{image}에는 사용자 데이터가 필요하지만 %{os_link}이(가) user_data 유형의 프로비저닝 템플릿에 연결되어 있지 않습니다. 적합한 템플릿에 연결하거나 %{compute_resource_image_link}에 대해 '사용자 데이터' 선택을 취소하십시오."],"Failed to remove certificates for %{name}: %{e}":["%{name}의 인증서 삭제에 실패했습니다: %{e}"],"Failed to acquire IP addresses from compute resource for %s":[""],"failed to save %s":["%s 저장 실패 "],"Failed to get IP for %{name}: %{e}":["%{name}의 IP를 얻는데 실패했습니다: %{e}"],"Failed to set IPs via IPAM for %{name}: %{e}":[""],"Failed to set IP for %{name}: %{e}":[""],"Failed to destroy a compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 삭제에 실패했습니다: %{e}"],"Failed to power up a compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 파워 업에 실패했습니다: %{e}"],"Failed to stop compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 중지에 실패했습니다: %{e}"],"Failed to update a compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 업데이트에 실패했습니다: %{e}"],"Failed to undo update compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 업데이트 취소에 실패했습니다: %{e}"],"Selected image does not belong to %s":["선택된 이미지는 %s에 속해 있지 않습니다 "],"Could not find virtual machine network interface matching %s":["%s과(와) 일치하는 가상 머신 네트워크 인터페이스를 찾을 수 없습니다."],"Connection to compute resource timed out":[""],"Connection to compute resource refused":[""],"Compute resource destination unreachable":[""],"DHCP":["DHCP"],"DHCP not supported for this NIC":["DHCP는 NIC에 대해 지원되지 않습니다 "],"Create DHCP Settings for %s":["%s의 DHCP 설정 생성 "],"Remove DHCP Settings for %s":["%s의 DHCP 설정 삭제 "],"DHCP conflicts removal for %s":["%s의 DHCP 충돌 삭제 "],"DHCP records %s already exists":["DHCP 기록 %s은(는) 이미 존재합니다 "],"DNS":["DNS"],"Create %{type} for %{host}":[""],"Remove %{type} for %{host}":[""],"Remove conflicting %{type} for %{host}":[""],"%{type} %{conflicts} already exists":[""],"Error connecting to system DNS server(s) - check /etc/resolv.conf":["시스템 DNS 서버에 연결하는 도중 오류가 발생했습니다. - /etc/resolv.conf를 확인하십시오."],"Error connecting to '%{domain}' domain DNS servers: %{servers} - check query_local_nameservers and dns_timeout settings":[""],"This IP address has already been reserved in External IPAM":[""],"Some interfaces are invalid":["일부 인터페이스가 유효하지 않습니다."],"Creating IPv4 in External IPAM for %s":[""],"Creating IPv6 in External IPAM for %s":[""],"Removing IPv4 in External IPAM for %s":[""],"Removing IPv6 in External IPAM for %s":[""],"Failed to initialize the PuppetCA proxy: %s":["PuppetCA 프록시 초기화에 실패했습니다: %s"],"Reset PuppetCA certname for %s":[""],"Cleanup PuppetCA certificates for %s":[""],"Enable PuppetCA autosigning for %s":[""],"Delete PuppetCA certificates for %s":["%s의 PuppetCA 인증서 삭제 "],"Disable PuppetCA autosigning for %s":[""],"Failed to initialize the realm proxy: %s":["영역 프록시 초기화에 실패했습니다: %s"],"Realm proxy did not return a one-time password":["영역 프록시는 일회용 암호를 반환하지 않습니다 "],"Failed to create %{name}'s realm entry: %{e}":["%{name}'의 영역 항목 생성에 실패했습니다: %{e}"],"Create realm entry for %s":["%s의 영역 항목 생성 "],"Update realm entry for %s":["%s의 영역 항목 업데이트 "],"Delete realm entry for %s":["%s의 영역 항목 삭제 "],"Prepare post installation script for %s":["%s의 설치 후 스크립트 준비 "],"Wait for %s to come online":["온라인 상에 있을 때 까지 %s 동안 대기 "],"Configure instance %s via SSH":["SSH를 통해 인스턴스 %s 설정 "],"Unable to find proper authentication method":["올바른 인증 방식을 찾을 수 없습니다 "],"Failed to login via SSH to %{name}: %{e}":[" SSH를 통해 %{name}에 로그인 실패했습니다: %{e}"],"Provision script had a non zero exit":["프로비저닝 스크립트에 0이 아닌 종료가 있습니다."],"Failed to launch script on %{name}: %{e}":["%{name} 상의 스트립트 시작에 실패했습니다: %{e}"],"No finish templates were found for this host, make sure you define at least one in your %s settings":["이 호스트의 마지막 템플릿을 찾을 수 없습니다. %s 설정에 적어도 하나의 템플릿이 지정되어 있는지 확인합니다 "],"TFTP":["TFTP"],"Unable to render %{kind} template '%{name}': %{e}":[""],"Template '%s' was not found":[""],"Unable to render '%{name}' template: %{e}":[""],"Failed to fetch boot files":["부팅 파일을 가져오는데 실패했습니다 "],"No %{template_kind} templates were found for this host, make sure you define at least one in your %{os} settings or change PXE loader":[""],"Deploy TFTP %{kind} config for %{host}":[""],"Fetch TFTP boot files for %s":["%s의 TFTP 부팅 파일 가져오기 "],"Delete TFTP %{kind} config for %{host}":[""],"has already been taken":["이미 사용되고 있습니다"],"Please ensure the following parameters name are unique":["다음 매개 변수 이름이 고유한 것인지 확인하십시오 "],"'%{loader}' is not one of %{loaders}":[""],"Invalid %{assoc} selection, you must select at least one of yours and have '%{perm}' permission.":[""],"cannot be used, please choose another":[""],"is not valid":["유효하지 않습니다."],"must be one of [ %s ]":["[ %s ] 중 하나여야 합니다 "],"Unsupported report status format":["지원되지 않는 보고서 상태 형식 "],"invalid host list":["잘못된 호스트 목록 "],"Modified":["수정됨"],"DNS Proxy":["DNS 프록시 "],"DNS proxy to use within this domain for managing A records, note that PTR records are managed via Subnet DNS proxy":["A 레코드를 관리하기 위해 이 도메인에서 사용되는 DNS 프록시입니다. PTR 레코드는 서브넷 DNS 프록시를 통해 관리됨에 유의합니다 "],"DNS proxy ID to use within this domain":[""],"LDAP error - %{message}":["LDAP 오류 - %{message}"],"is not found in the authentication source":["인증 소스에서 찾을 수 없습니다 "],"is not permitted":["권한 없음 "],"Domain Users is a special group in AD. Unfortunately, we cannot obtain membership information from a LDAP search and therefore sync it.":[""],"invalid search query: %s":["잘못된 검색 쿼리: %s"],"filter for %s role":["%s 역할 필터 "],"(Miscellaneous)":["(기타)"],"must be of same resource type (%{types}) - Role (%{role})":[""],"You must select at least one permission":["최소 하나의 권한을 선택해야 합니다 "],"You can't assign organizations to this resource":["이 리소스에 조직을 할당할 수 없습니다 "],"You can't assign locations to this resource":["이 리소스에 위치를 할당할 수 없습니다 "],"is locked for user modifications.":[""],"host must have one primary interface":["호스트에 기본 인터페이스가 1개 필요합니다."],"managed host must have one provision interface":["관리되는 호스트에 프로비저닝 인터페이스가 1개 필요합니다."],"some interfaces are invalid":["일부 인터페이스가 유효하지 않습니다."],"invalid time range":["잘못된 시간 범위 "],"should be 8 characters or more":["8 자 이상이어야 합니다 "],"should not be blank - consider setting a global or host group default":["비워둘 수 없습니다 - 글로벌 또는 호스트 그룹 기본값을 설정해야 합니다 "],"can't be blank unless a custom partition has been defined":["사용자 정의 파티션을 정의하지 않으면 비워둘 수 없습니다 "],"is unknown":["알 수 없음 "],"must belong to host's operating system":[""],"Network Based":["네트워크 기반 "],"Image Based":["이미지 기반 "],"host":["호스트"],"hostgroup":["호스트그룹 "],"global setting":[""],"An interface marked as provision is missing":[""],"An interface marked as primary is missing":[""],"No BMC NIC available for host %s":[""],"There are orchestration modules with methods for configuration rebuild that have identical name: '%s'":["구성 다시 빌드를 위한 메서드가 포함된 이름이 동일한 오케스트레이션 모듈이 여러 개 있습니다: '%s'"],"%{value} does not belong to %{os} operating system":["%{value}은(는) %{os} 운영 체제에 속해 있지 않습니다 "],"is an unsupported provisioning method, available: %s":[""],"can't be updated after host is provisioned":["호스트를 프로비저닝한 후 업데이트할 수 없습니다 "],"must not include periods":["마침표를 포함할 수 없습니다 "],"with id %{object_id} doesn't exist or is not assigned to proper organization and/or location":[""],"Pending installation":["보류 중인 설치"],"Installation error":[""],"Installed":["설치됨 "],"Unknown build status":["알 수 없는 빌드 상태"],"Configuration":["설정"],"Alerts disabled":["경고 비활성화 "],"No reports":["보고서가 없음 "],"No changes":["변경 사항 없음 "],"Global":["글로벌"],"Default value":["기본값 "],"must be of type Subnet::Ipv4.":[""],"must be of type Subnet::Ipv6.":[""],"is not valid.":[""],"could not be found in %s":["%s에 없습니다."],"regexp":["정규식 "],"list":["목록"],"invalid path":["잘못된 경로 "],"can only be set for array, hash, json or yaml":[""],"can only be set for arrays that have merge_overrides set to true":["merge_overrides가 True로 설정된 배열에만 설정할 수 있습니다 "],"can only be set when merge overrides is set":["병합 덮어쓰기가 설정된 경우에만 설정할 수 있습니다."],"%{match} does not match an existing host":["%{match}은(는) 기존 호스트와 일치하지 않습니다 "],"%{match} does not match an existing host group":["%{match}은(는) 기존 호스트 그룹과 일치하지 않습니다 "],"%{key} does not exist in order field":[""],"Subscribe to my hosts":[""],"Subscribe to all hosts":[""],"Daily":["매일"],"Weekly":["매주"],"Monthly":["매달"],"Subscribe":["등록 "],"does not appear to be a valid nfs mount path":["유효한 NFS 마운트 경로가 표시되지 않습니다 "],"%{record} is used by host in build mode %{what}":["%{record}은(는) 빌드 모드의 호스트 %{what}에 의해 사용되고 있습니다 "],"Unnamed":[""],"can't find domain with this id":["이 ID의 도메인을 찾을 수 없습니다."],"can't delete primary interface of managed host":["관리되는 호스트의 기본 인터페이스를 삭제할 수 없습니다."],"can't delete provision interface of managed host":["관리되는 호스트의 프로비저닝 인터페이스를 삭제할 수 없습니다."],"interface is already set on the host":[""],"must be a unicast MAC address":[""],"can't be changed once the interface is saved":[""],"can't be set for this interface because it's provided by the compute resource":[""],"Unable to find a proxy with BMC feature":["BMC 기능이 있는 프록시를 찾을 수 없습니다 "],"BMC":["BMC"],"There is no proxy with BMC feature set up. Associate a BMC feature with a subnet.":[""],"Bond":["본딩 "],"Bridge":["브릿지"],"subnet boot mode is not %s":["서브넷 부팅 모드가 %s이(가) 아닙니다."],"Operating System version is required":["운영 체제 버전이 필요합니다 "],"Operating system version already exists":["운영 체제 버전이 이미 있습니다."],"Please provide a medium provider. It can be found as @medium_provider in templates, or Foreman::Plugin.medium_providers_registry.find_provider(host)":[""],"HTTP UEFI boot requires proxy with httpboot feature":[""],"Attempting to construct an operating system image filename but %s cannot be built from an image":["운영 체제 이미지 파일 이름을 생성하려 했지만 %s은 이미지에서 만들 수 없습니다 "],"Function not available for %s":["%s에 사용할 수 없는 기능"],"auxiliary field":[""],"global":["글로벌"],"domain":["도메인 "],"host group":["호스트 그룹"],"location":["위치 "],"You do not have permission to %s this location parameter":["위치 매개 변수 %s에 대한 권한이 없습니다"],"organization":["조직 "],"You do not have permission to %s this organization parameter":["조직 매개 변수 %s에 대한 권한이 없습니다 "],"operating system":["운영 체제"],"subnet":[""],"Must provide template kind":["템플릿 종류를 지정해야 합니다 "],"Must provide an operating system":[""],"No TFTP proxies defined, can't continue":["TFTP 프록시가 지정되어 있지 않습니다, 계속 진행할 수 없습니다 "],"Could not find a Configuration Template with the name \\\"%s\\\", please create one.":[""],"PXE files for templates %s have been deployed to all Smart Proxies":[""],"There was an error creating the PXE file: %s":[""],"can't assign operating system to Registration template":[""],"specified template \\\"%s\\\" kind was not found":[""],"Realm proxy":["영역 프록시 "],"Realm proxy to use within this realm":["이 영역에 사용할 영역 프록시 "],"Proxy ID to use within this realm":[""],"Input %s: ":[""],"Unable to create the default role.":[""],"One or more of the associated filters are invalid which prevented the role to be saved":[""],"Unable to submit role: Problem with associated filter %s":[""],"Cannot delete built-in role":[""],"This role is locked from being modified by users.":[""],"some permissions were not found: %s":[""],"must be boolean":["부울이어야 합니다 "],"must be integer":["정수여야 합니다 "],"must be an array":["어레이여야 합니다 "],"Parsing a hash from a string is not supported":[""],"Parsing settings type '%s' from a string is not defined":[""],"Error parsing value for setting '%s': %s":[""],"Host owner is invalid":[""],"is invalid: %s":["잘못됨: %s"],"is not allowed to change":["변경할 수 없음 "],"Only one declaration of a proxy is allowed":["하나의 프록시만 지정할 수 있습니다 "],"An invalid response was received while requesting available features from this proxy":[""],"Unable to communicate with the proxy: %s":["프록시와 통신할 수 없습니다: %s"],"HTTP boot requires proxy with httpboot feature and http_port exposed setting":[""],"HTTPS boot requires proxy with httpboot feature and https_port exposed setting":[""],"Features \\\"%s\\\" in this proxy are not recognized by Foreman. If these features come from a Smart Proxy plugin, make sure Foreman has the plugin installed too.":[""],"No features found on this proxy, please make sure you enable at least one feature":["이 프록시의 기능이 없습니다. 적어도 하나의 기능을 활성화하고 있는지 확인하십시오"],"Please check the proxy is configured and running on the host.":["프록시가 설정되어 호스트에서 실행되고 있는지 확인하십시오. "],"must be in OpenSSH public key format":[""],"should be a single line":[""],"could not be generated":[""],"could not be calculated":[""],"IPv4":["IPv4"],"IPv6":["IPv6"],"Static":["고정 "],"DHCP Proxy":["DHCP 프록시 "],"DHCP Proxy to use within this subnet":["이 서브넷에서 사용할 DHCP 프록시 "],"DHCP Proxy ID to use within this subnet":[""],"TFTP Proxy":["TFTP 프록시 "],"TFTP Proxy ID to use within this subnet":[""],"TFTP Proxy to use within this subnet":["이 서브넷에서 사용할 TFTP 프록시 "],"HTTPBoot":[""],"HTTPBoot Proxy":[""],"HTTPBoot Proxy ID to use within this subnet":[""],"HTTPBoot Proxy to use within this subnet":[""],"External IPAM":[""],"External IPAM Proxy ID to use within this subnet":[""],"External IPAM Proxy to use within this subnet":[""],"Reverse DNS Proxy":["역방향 DNS 프록시"],"DNS Proxy ID to use within this subnet":[""],"DNS Proxy to use within this subnet for managing PTR records, note that A and AAAA records are managed via Domain DNS proxy":[""],"Templates":["템플릿 "],"Template Proxy":[""],"Template HTTP(S) Proxy ID to use within this subnet":[""],"Template HTTP(S) Proxy to use within this subnet to allow access templating endpoint from isolated networks":[""],"BMC Proxy":[""],"BMC Proxy ID to use within this subnet":[""],"BMC Proxy to use within this subnet for management access":[""],"not supported by this protocol":[""],"There must be at least one Smart Proxy present with an External IPAM plugin installed and configured":[""],"A Smart Proxy with an External IPAM feature enabled must be selected in the Proxies tab.":[""],"Subnet not found in the configured External IPAM instance":[""],"Group not found in the configured External IPAM instance":[""],"Subnet not found in the specified External IPAM group":[""],"Unsupported IPAM mode for %s":[""],"must be specified if to is defined":["대상 위치가 지정되어 있는 경우 지정해야 합니다 "],"must be specified if from is defined":["원래 위치가 지정되어 있는 경우 지정해야 합니다 "],"does not belong to subnet":["서브넷에 속해 있지 않습니다 "],"can't be bigger than to range":["범위보다 클 수 없습니다 "],"can't be updated after subnet is saved":[""],"unknown network_type":[""],"Prefix length must be /64 or less to use EUI-64":[""],"Missing a permission to edit parent %s":[""],"Duplicated inputs detected: %{duplicated_inputs}":["중복된 입력이 감지되었습니다: %{duplicated_inputs}"],"This template is locked and may not be removed.":["템플릿이 잠겨 있어 삭제할 수 없습니다. "],"You are not authorized to lock templates.":["템플릿을 잠글 권한이 없습니다."],"You are not authorized to make a template default.":["템플릿을 기본 템플릿으로 설정할 권한이 없습니다."],"This template is locked. Please clone it to a new template to customize.":["이 템플릿은 잠겨 있습니다. 사용자 정의하려면 이를 새 템플릿에 복제하십시오. "],"Cannot add audit comment to a locked template.":[""],"Cannot delete template input as template is locked.":[""],"PXELinux template":[""],"PXEGrub template":[""],"PXEGrub2 template":[""],"iPXE template":[""],"Provisioning template":["프로비저닝 템플릿"],"Finish template":[""],"Script template":[""],"User data template":[""],"ZTP PXE template":[""],"POAP PXE template":[""],"Cloud-init template":[""],"Host initial configuration template":[""],"Registration template":[""],"Discovery Kexec":[""],"Boot disk":["부팅 디스크 "],"Used when PXELinux loader is set, loads pxelinux.0 which loads content generated by this template.":[""],"Used when Grub2 loader is set, loads grub/bootx64.efi which loads content generated by this template.":[""],"Used when PXELinux loader is set, loads grub/grubx64.efi which loads content generated by this template.":[""],"Used in iPXE environments.":[""],"Template for OS installer, for example kickstart, preseed or jumpstart. Depends on the operating system.":[""],"Post-install script for preseed-based or cloud instance. Connection is made via SSH, credentials or key must exist and inventory IP address must match. Only used when 'user data' is not set.":[""],"An arbitrary script, must be manually downloaded using wget/curl.":[""],"Template with seed data for virtual or cloud instances when 'user data' flag is set, typically cloud-init or ignition format.":[""],"Provisioning Junos devices (Junos 12.2+).":[""],"Provisioning for switches running NX-OS.":[""],"Template for cloud-init unattended endpoint.":[""],"Contains the instructions in form of a bash script for the initial host configuration, after the host is registered in Foreman":[""],"already exists":["이미 존재합니다 "],"Anonymous admin user %s is missing, run foreman-rake db:seed":["익명의 관리자 %s가 없습니다. foreman-rake db:seed를 실행합니다 "],"Incorrect password":["비밀번호가 틀립니다."],"A user group already exists with this name":["이 이름으로된 사용 그룹이 이미 존재합니다 "],"Can't delete the last admin account":["마지막 관리 계정을 삭제할 수 없음 "],"cannot be removed from the last admin account":["마지막 관리 계정에서 삭제할 수 없음 "],"Can't delete internal admin account":["내부 관리 계정을 삭제할 수 없음 "],"cannot be removed from an internal protected account":["내부적으로 보안된 계정에서 삭제할 수 없습니다 "],"cannot be changed on an internal protected account":["내부적으로 보안된 계정을 변경할 수 없습니다 "],"you can't assign some of roles you selected":["선택한 역할의 일부를 할당할 수 없습니다 "],"you can't change administrator flag":["관리자 플래그를 변경할 수 없습니다 "],"cannot be changed by a non-admin user":["관리자가 아닌 사용자는 변경할 수 없습니다."],"default locations need to be user locations first":["기본값 위치는 먼저 사용자 위치가 되어야 합니다 "],"default organizations need to be user organizations first":["기본값 조직은 먼저 사용자 조직이 되어야 합니다 "],"It is not possible to change external users login":[""],"You do not have permission to edit the login":[""],"It is not possible to disable yourself":[""],"has this role already":["이미 이 역할이 있습니다 "],"is already used by a user account":["사용자 계정에 의해 이미 사용되고 있습니다 "],"Can't delete the last admin user group":["마지막 관리 사용자 그룹을 삭제할 수 없음 "],"admin flag can only be modified by admins":[""],"cannot contain itself as member":[""],"Unsupported search operators :and / :or":[""],"%{id} plugin requires Foreman %{matcher} but current is %{current}":["%{id} 플러그인에는 Foreman %{matcher}가 필요하지만 현재는 %{current}입니다 "],"%{id} plugin requires the %{plugin_name} plugin, not found":["%{id} 플러그인에는 %{plugin_name} 플러그인이 필요하지만 찾을 수 없습니다 "],"%{id} plugin requires the %{plugin_name} plugin %{matcher} but current is %{plugin_version}":["%{id} 플러그인에는 %{plugin_name} 플러그인 %{matcher}가 필요하지만 현재는 %{plugin_version}입니다"],"Cannot register compute resource, wrong type supplied":[""],"Could not create role '%{name}': %{message}":[""],"Cannot continue because some permissions were not found, please run rake db:seed and retry":[""],"Could not add permissions to Manager and Viewer roles: %s":[""],"Could not add permissions to Manager role: %s":[""],"Could not add permissions to Viewer role: %s":[""],"Could not add permissions to Organization admin role: %s":[""],"Could not extend role '%{name}': %{message}":[""],"General":["일반 "],"Setting '%s' is already defined, please avoid collisions":[""],"Setting '%s' has an invalid type definition. Please use a valid type.":[""],"Authentication":["보안 및 인증"],"Foreman will use OAuth for API authorization":["Foreman은 API 인증에 OAuth를 사용합니다 "],"OAuth active":["OAuth 활성"],"OAuth consumer key":["인증 컨슈머 키 "],"OAuth consumer secret":["OAuth 컨슈머 기밀 "],"When enabled, Foreman will map users by username in request-header. If this is disabled, OAuth requests will have admin rights.":[""],"OAuth map users":["OAuth 맵 사용자"],"Foreman will block user logins from an IP address after this number of failed login attempts for 5 minutes. Set to 0 to disable bruteforce protection":[""],"Failed login attempts limit":[""],"Only known Smart Proxies may access features that use Smart Proxy authentication":["알려진 스마트 프록시만 스마트 프록시 인증을 사용하는 기능에 액세스할 수 있습니다."],"Restrict registered smart proxies":["등록된 스마트 프록시 제한"],"List of hostnames, IPv4, IPv6 addresses or subnets to be trusted in addition to Smart Proxies for access to fact/report importers and ENC output":[""],"Trusted hosts":[""],"SSL Certificate path that Foreman would use to communicate with its proxies":["Foreman이 프록시와 통신하는데 사용할 SSL 인증서 경로 "],"SSL certificate":["SSL 인증서"],"SSL CA file path that Foreman will use to communicate with its proxies":[""],"SSL CA file":["SSL CA 파일"],"SSL Private Key path that Foreman will use to communicate with its proxies":[""],"SSL private key":["SSL 비공개 키"],"Environment variable containing the subject DN from a client SSL certificate":["클라이언트 SSL 인증서에서 주체 DN가 포함되어 있는 환경 변수 "],"SSL client DN env":["SSL 클라이언트 DN 환경"],"Environment variable containing the verification status of a client SSL certificate":["클라이언트 SSL 인증서의 유효성 검사 상태가 들어 있는 환경 변수 "],"SSL client verify env":["SSL 클라이언트 확인 환경"],"Environment variable containing a client's SSL certificate":["클라이언트의 SSL 인증서가 포함되어 있는 환경 변수"],"SSL client cert env":["SSL 클라이언트 인증서 환경"],"SSL CA file path that will be used in templates (to verify the connection to Foreman)":[""],"Server CA file":[""],"Private key file path that Foreman will use to encrypt websockets":[""],"Websockets SSL key":["Websocket SSL 키"],"Certificate path that Foreman will use to encrypt websockets":[""],"Websockets SSL certificate":["Websocket SSL 인증서"],"VNC/SPICE websocket proxy console access encryption (websockets_ssl_key/cert setting required)":["VNC/SPICE websocket 프록시 콘솔 액세스 암호화(websockets_ssl_key/cert 설정 필요)"],"Websockets encryption":["Websocket 암호화"],"Unable to turn on websockets_encrypt, either websockets_ssl_key or websockets_ssl_cert is missing":["websockets_encrypt를 켤 수 없습니다. websockets_ssl_key 또는 websockets_ssl_cert가 누락되었습니다."],"Unable to unset websockets_ssl_key when websockets_encrypt is on":["websockets_encrypt가 켜져 있는 경우 websockets_ssl_key를 설정 해제할 수 없습니다."],"Unable to unset websockets_ssl_cert when websockets_encrypt is on":["websockets_encrypt가 켜져 있는 경우 websockets_ssl_cert를 설정 해제할 수 없습니다."],"Redirect your users to this url on logout (authorize_login_delegation should also be enabled)":["로그 아웃 시 사용자를 이 URL로 방향 전환합니다 (authorize_login_delegation도 활성화해야 합니다) "],"Login delegation logout URL":["로그인 권한 로그아웃 URL"],"Name of the external auth source where unknown externally authentication users (see authorize_login_delegation) should be created. Empty means no autocreation.":[""],"Authorize login delegation auth source user autocreate":["로그인 권한 승인 인증 소스 사용자 자동 생성"],"Authorize login delegation with REMOTE_USER HTTP header":[""],"Authorize login delegation":["로그인 권한 승인"],"Authorize login delegation with REMOTE_USER HTTP header for API calls too":[""],"Authorize login delegation API":["로그인 권한 승인 API"],"Log out idle users after a certain number of minutes":["일정 시간 (분)이 지나면 유휴 사용자는 로그아웃됩니다"],"Idle timeout":["유휴 시간 초과"],"Password hashing algorithm. A password change is needed effect existing passwords.":[""],"Password hashing algorithm":[""],"SHA1":[""],"BCrypt":[""],"PBKDF2 SHA1":[""],"Cost value of bcrypt password hash function for internal auth-sources (4-30). A higher value is safer but verification is slower, particularly for stateless API calls and UI logins. A password change is needed effect existing passwords.":[""],"BCrypt password cost":[""],"Cost value of PBKDF2 password hash function for internal auth-sources. A higher value is safer but verification is slower, particularly for stateless API calls and UI logins. A password change is needed effect existing passwords.":[""],"PBKDF2 password cost":[""],"Permits access to BMC interface passwords through ENC YAML output and in templates":[""],"BMC credentials access":[""],"OpenID Connect JSON Web Key Set(JWKS) URL. Typically https://keycloak.example.com/auth/realms/<realm name>/protocol/openid-connect/certs when using Keycloak as an OpenID provider":[""],"OIDC JWKs URL":[""],"Name of the OpenID Connect Audience that is being used for Authentication. In case of Keycloak this is the Client ID.":[""],"OIDC Audience":[""],"The iss (issuer) claim identifies the principal that issued the JWT, which exists at a `/.well-known/openid-configuration` in case of most of the OpenID providers.":[""],"OIDC Issuer":[""],"The algorithm used to encode the JWT in the OpenID provider.":[""],"OIDC Algorithm":[""],"Config Management":[""],"Foreman will create the host when a report is received":["Foreman은 보고서를 수신할 때 호스트를 생성합니다 "],"Create new host when report is uploaded":["보고서를 업로드할 때 새 호스트 생성"],"Foreman matchers will be inherited by children when evaluating smart class parameters for hostgroups, organizations and locations":[""],"Matchers inheritance":[""],"Foreman will evaluate host smart class parameters in this order by default":[""],"Default parameters lookup path":[""],"Foreman will parse ERB in parameters value in the ENC output":["Foreman은 ENC 출력의 매개 변수 값 ERB를 구문 분석합니다 "],"Interpolate ERB in parameters":["매개 변수에 ERB 추가"],"All hosts will show a configuration status even when a Puppet smart proxy is not assigned":["Puppet 스마트 프록시가 할당되지 않은 경우에도 모든 호스트에 구성 상태를 표시합니다."],"Always show configuration status":["구성 상태 항상 표시"],"Email":["이메일 "],"Email reply address for emails that Foreman is sending":["Foreman이 전송하는 이메일에 대한 메일 회신 주소"],"Email reply address":["이메일 회신 주소"],"Prefix to add to all outgoing email":["모든 보내는 이메일에 추가할 접두사"],"Email subject prefix":["이메일 제목 접두사"],"Send a welcome email including username and URL to new users":["새 사용자에게 사용자 이름 및 URL이 포함된 환영 이메일을 보냅니다."],"Send welcome email":["환영 이메일 보내기"],"Method used to deliver email":[""],"Delivery method":[""],"Sendmail":["센드메일"],"SMTP":["SMTP"],"SMTP automatic STARTTLS":[""],"SMTP enable StartTLS auto":[""],"When using TLS, you can set how OpenSSL checks the certificate":[""],"SMTP OpenSSL verify mode":[""],"Default verification mode":[""],"none":["없음 "],"SMTP address to connect to":[""],"SMTP address":[""],"SMTP port to connect to":[""],"SMTP port":[""],"HELO/EHLO domain":[""],"SMTP HELO/EHLO domain":[""],"Username to use to authenticate, if required":[""],"SMTP username":[""],"Password to use to authenticate, if required":[""],"SMTP password":[""],"Specify authentication type, if required":[""],"SMTP authentication":[""],"Specify additional options to sendmail. Only used when the delivery method is set to sendmail.":[""],"Sendmail arguments":[""],"The location of the sendmail executable. Only used when the delivery method is set to sendmail.":[""],"Sendmail location":[""],"Invalid sendmail location, use settings.yaml for arbitrary location":[""],"Foreman will create the host when new facts are received":["Foreman은 새 정보를 수신할 때 호스트를 생성합니다 "],"Create new host when facts are uploaded":["팩트를 업로드할 때 새 호스트 생성"],"Hosts created after a puppet run will be placed in the location this fact dictates. The content of this fact should be the full label of the location.":["puppet 실행 후 생성되는 호스트는 정보가 정하는 위치에 배치됩니다. 이러한 정보의 내용은 위치 전체 레이블이 되어야 합니다. "],"Location fact":["위치 팩트"],"Hosts created after a puppet run will be placed in the organization this fact dictates. The content of this fact should be the full label of the organization.":["puppet 실행 후 생성되는 호스트는 이 정보가 정하는 조직에 배치됩니다. 이러한 정보의 내용은 조직 전체 레이블이 되어야 합니다."],"Organization fact":["조직 팩트"],"Hosts created after a puppet run that did not send a location fact will be placed in this location":["위치 정보를 전송하지 않고 puppet 실행 후 생성되는 호스트는 이 위치에 배치됩니다 "],"Default location":["기본 위치"],"Hosts created after a puppet run that did not send a organization fact will be placed in this organization":["조직 정보를 전송하지 않고 puppet 실행 후 생성되는 호스트는 이 조직에 배치됩니다 "],"Default organization":["기본 조직"],"Foreman will update a host's hostgroup from its facts":[""],"Update hostgroup from facts":[""],"Stop updating Operating System from facts":[""],"Ignore facts for operating system":[""],"Stop updating domain values from facts":[""],"Ignore facts for domain":[""],"Foreman will update a host's subnet from its facts":[""],"Update subnets from facts":[""],"Provisioning only":[""],"Stop updating IP and MAC address values from facts (affects all interfaces)":[""],"Ignore interfaces facts for provisioning":[""],"Skip creating or updating host network interfaces objects with identifiers matching these values from incoming facts. You can use * wildcard to match identifiers with indexes e.g. macvtap*. The ignored interfaces raw facts will be still stored in the DB, see the 'Exclude pattern' setting for more details.":[""],"Ignore interfaces with matching identifier":["일치하는 식별자가 있는 인터페이스 무시"],"Exclude pattern for all types of imported facts (puppet, ansible, rhsm). Those facts won't be stored in foreman's database. You can use * wildcard to match names with indexes e.g. ignore* will filter out ignore, ignore123 as well as a::ignore or even a::ignore123::b":[""],"Exclude pattern for facts stored in foreman":[""],"Browser locale":["브라우저 로케일 "],"Browser timezone":["브라우저 시간대"],"The default administrator email address":["기본값 관리자 이메일 주소 "],"Administrator email address":["관리자 이메일 주소"],"URL where your Foreman instance is reachable (see also Provisioning > unattended_url)":["Foreman 인스턴스가 도달할 수 있는 URL (프로비저닝 > unattended_url 참조)"],"Foreman URL":["Foreman URL"],"Number of records shown per page in Foreman":["Foreman에서 페이지 당 표시되는 기록 수"],"Entries per page":["페이지당 항목 수"],"Should the `foreman-rake db:seed` be executed on the next run of the installer modules?":["다음번 설치 프로그램 모듈 실행 시 `foreman-rake db:seed`를 실행해야 합니까? "],"DB pending seed":["DB 보류 중인 시드"],"Open and read timeout for HTTP requests from Foreman to Smart Proxy (in seconds)":[""],"Smart Proxy request timeout":[""],"Text to be shown in the login-page footer. Keyword $VERSION is replaced by current version.":[""],"Version":["버전 "],"Login page footer text":[""],"Show power status on host index page. This feature calls to compute resource providers which may lead to decreased performance on host listing page.":[""],"Show host power status":[""],"Set a proxy for all outgoing HTTP(S) connections from Foreman. System-wide proxies must be configured at the operating system level.":[""],"HTTP(S) proxy":[""],"Set hostnames to which requests are not to be proxied. Requests to the local host are excluded by default.":[""],"HTTP(S) proxy except hosts":[""],"Whether or not to show a menu to access experimental lab features (requires reload of page)":[""],"Show Experimental Labs":[""],"Foreman will append domain names when new hosts are provisioned":[""],"Append domain names to the host":[""],"Duration in minutes after servers are classed as out of sync. This setting is overridden by specific settings from config management tools (e.g. puppet_inteval, ansible_interval).":[""],"Out of sync interval":["비동기화 간격"],"Foreman instance ID, uniquely identifies this Foreman instance.":[""],"Foreman UUID":[""],"Language to use for new users":[""],"Default language":[""],"Timezone to use for new users":[""],"Default timezone":[""],"The instance title is shown on the top navigation bar (requires a page reload).":[""],"Instance title":[""],"Duration in days to preserve audits for. Leave empty to disable the audits cleanup.":[""],"Saved audits interval":[""],"Foreman will load the new UI for host details":[""],"New host details UI":[""],"Notifications":["통지 "],"Whether to pull RSS notifications or not":[""],"RSS enable":[""],"URL to fetch RSS notifications from":[""],"RSS URL":[""],"Users":["사용자 "],"Usergroups":[""],"Default owner on provisioned hosts, if empty Foreman will use current user":[""],"Host owner":[""],"Select an owner":[""],"Default encrypted root password on provisioned hosts":["프로비저닝 호스트의 기본값으로 암호화된 root 암호 "],"Root password":["루트 암호"],"URL hosts will retrieve templates from during build, when it starts with https unattended/userdata controllers cannot be accessed via HTTP":[""],"Unattended URL":["자동 URL"],"Enable safe mode config templates rendering (recommended)":["안전 모드 설정 템플릿 렌터링을 활성화 (권장 사항)"],"Safemode rendering":["안전 모드 렌더링"],"Allow access to unattended URLs without build mode being used":[""],"Access unattended without build":[""],"Foreman will query the locally configured resolver instead of the SOA/NS authorities":["Foreman은 SOA/NS 권한 대신 로컬 설정 분석기를 쿼리합니다 "],"Query local nameservers":["로컬 이름 서버 쿼리"],"Time in minutes installation tokens should be valid for, 0 to disable token generation":["설치 토큰의 유효성이 유지되는 시간(분)입니다. 0으로 설정하면 토큰 생성이 비활성화됩니다."],"Installation token lifetime":[""],"Time in seconds before SSH provisioning times out":[""],"SSH timeout":[""],"The IP address that should be used for the console listen address when provisioning new virtual machines via Libvirt":["Libvirt를 통한 새 가상 머신을 프로비저닝할 때 콘솔 수신 주소에 사용해야 하는 IP 주소입니다 "],"Libvirt default console address":["Libvirt 기본 콘솔 주소"],"Foreman will update the host IP with the IP that made the built request":["Foreman은 빌드 요청된 IP로 호스트 IP를 업데이트합니다 "],"Update IP from built request":["빌드 요청에서 IP 업데이트"],"Foreman will use the short hostname instead of the FQDN for creating new virtual machines":["Foreman은 새 가상 머신을 생성하기 위해 FQDN 대신 짧은 호스트 이름을 사용합니다 "],"Use short name for VMs":["VM에 약어 사용"],"List of timeouts (in seconds) for DNS lookup attempts such as the dns_lookup macro and DNS record conflict validation":[""],"DNS timeout":[""],"Foreman will delete virtual machine if provisioning script ends with non zero exit code":["프로비저닝 스크립트가 0이 아닌 종료 코드로 끝나면 Foreman이 가상 머신을 삭제합니다."],"Clean up failed deployment":["실패한 배포 정리"],"Random gives unique names, MAC-based are longer but stable (and only works with bare-metal)":[""],"Type of name generator":[""],"Default PXE menu item in global template - 'local', 'discovery' or custom, use blank for template default":[""],"Default PXE global template entry":[""],"Default PXE menu item in local template - 'local', 'force_local_chain_hd0' or custom, use blank for template default":[""],"Default PXE local template entry":[""],"Intermediate iPXE script for unattended installations":[""],"iPXE intermediate script":[""],"Destroy associated VM on host delete. When enabled, VMs linked to Hosts will be deleted on Compute Resource. When disabled, VMs are unlinked when the host is deleted, meaning they remain on Compute Resource and can be re-associated or imported back to Foreman again. This does not automatically power off the VM":[""],"Destroy associated VM on host delete":[""],"Maximum amount of keys in structured subtree, statistics stored in foreman::dropped_subtree_facts":[""],"Maximum structured facts":[""],"Global Registration template":[""],"Default Global registration template":[""],"Default 'Host initial configuration' template, automatically assigned when a new operating system is created":[""],"Default 'Host initial configuration' template":[""],"Full path to CoreOS transpiler (ct) with arguments as an comma-separated array":[""],"CoreOS Transpiler Command":[""],"Full path to Fedora CoreOS transpiler (fcct) with arguments as an comma-separated array":[""],"Fedora CoreOS Transpiler Command":[""],"Global default %s template. This template gets deployed to all configured TFTP servers. It will not be affected by upgrades.":[""],"Global default %s template":[""],"Template that will be selected as %s default for local boot.":[""],"Local boot %s template":[""],"Foreman will automate certificate signing upon provision of new host":["Foreman은 새 호스트의 프로비저닝에서 인증서 서명을 자동화합니다 "],"Manage PuppetCA":["PuppetCA 관리"],"Foreman will use random UUIDs for certificate signing instead of hostnames":["Foreman은 인증서 서명을 위해 호스트 이름 대신 임의의 UUID를 사용합니다 "],"Use UUID for certificates":["인증서에 UUID 사용"],"My Account":[""],"Log Out":[""],"Administer":["관리자"],"Locations":["위치 "],"Organizations":["조직 "],"Authentication Sources":[""],"User Groups":["사용자 그룹"],"Roles":["역할 "],"Bookmarks":["북마크"],"Settings":["설정 "],"About":["정보 "],"Monitor":["모니터"],"Dashboard":["대시보드 "],"Host Statuses":[""],"Report Templates":[""],"All Hosts":[""],"Register Host":["호스트 등록"],"Provisioning Setup":["프로비저닝 설정 "],"Architectures":["아키텍처 "],"Hardware Models":["하드웨어 모델 "],"Installation Media":["설치 미디어 "],"Operating Systems":["운영 체제 "],"Partition Tables":["파티션 테이블 "],"Provisioning Templates":["프로비저닝 템플릿 "],"Configure":["설정"],"Host Groups":["호스트 그룹 "],"Global Parameters":["글로벌 매개 변수 "],"Infrastructure":["인프라 "],"Smart Proxies":["스마트 프록시 "],"Compute Profiles":[""],"Subnets":["서브넷 "],"Domains":["도메인 "],"HTTP Proxies":[""],"Realms":["영역 "],"Lab Features":[""],"Cannot add pagelet with key %s and without partial":[""],"Cannot add pagelet with key %s and without mountpoint":[""],"unknown permission %s":["알 수 없는 권한 %s"],"LookupKey|Default value":["기본값 "],"invalid type %s":["잘못된 유형 %s"],"Unallowed template for dashboard widget: %s":["대시보드 위젯에 허용되지 않는 템플릿: %s"],"Host Configuration Status for %s":[""],"Host Configuration Chart for %s":[""],"Run Distribution Chart for %s":[""],"Latest Events":["최신 이벤트 "],"New Hosts":[""],"Hosts in build mode":[""],"Import of facts failed for host %s":[""],"Invalid version format, please enter in x.y (only major version).":["잘못된 버전 형식입니다. x.y 형식(메이저 버전만)으로 입력하십시오."],"%{value} is not one of %{rules}":["%{value}은(는) %{rules} 중 하나가 아닙니다 "],"BCrypt salt '%s' is invalid":[""],"Password hash setting was not yet set":[""],"Unknown password hash method: %s":[""],"Syntax error occurred while parsing the template %{name}, make sure you have all ERB tags properly closed and the Ruby syntax is valid. The Ruby error: %{message}":[""],"%{object_name} is a %{object_class}, expected a subnet":[""],"This templates requires a host to render but none was specified":[""],"Parameter %{name} is not set for host %{host}":[""],"Parameter %{name} is not set in host %{host} ENC output, resolving failed on step %{step}":[""],"Global setting %{name} is not accessible in safe-mode":[""],"Unknown host status \\\"%{status}\\\" was specified in host_status macro, use one of %{statuses}":[""],"Rendering failed, no input with name \\\"%{s}\\\" for input macro found":[""],"%{name} value is a \\\"%{type}\\\", expected \\\"resource\\\" value type":[""],"Rendering failed, one or more unknown columns specified for ordering - \\\"%{unknown}\\\"":[""],"Hostgroup not found or not accessible":[""],"Undefined setting '%{setting}'":[""],"Unsupported or no operating system found for this host.":["지원되지 않거나 이 호스트의 운영 체제를 찾을 수 없습니다."],"Unkown '%{klass}' resource class":[""],"SSL CA file not found, check the 'Server CA file' and 'SSL CA file' in Settings > Authentication":[""],"%s is not auditable":[""],"The snippet '%{name}' threw an error: %{exc}":[""],"%{controller}: provisioning token for host %{host} expired":[""],"%{controller}: unable to find a host that matches the request from %{addr}":[""],"%{controller}: %{host}'s operating system is missing":[""],"%{controller}: %{host}'s operating system %{os} has no OS family":[""],"Failed to validate %{host}: %{error}":["%{host} 확인에 실패했습니다: %{error}"],"No templates found for this host.":["이 호스트의 템플릿을 찾을 수 없습니다."],"Template %s is empty.":["템플릿 %s이 비어있습니다. "],"Failure parsing %{template}: %{error}.":["%{template} 구문 분석 실패: %{error}"],"No smart proxies found.":["스마트 프록시를 찾을 수 없습니다. "],"Failure deploying via smart proxy %{proxy}: %{error}.":["스마트 프록시 %{proxy}를 통한 배포 실패: %{error}"],"Error connecting to %{proxy}: %{error}.":["%{proxy}에 연결하는 도중 오류 발생: %{error}."],"%{input_type_attr_name}, used when input type is %{input_type}":[""],"Fact value":["정보 값 "],"Value for required input '%s' was not specified":["필수 입력 '%s'의 값을 지정하지 않았습니다."],"User input":["사용자 입력"],"Should the value be hidden from users? Useful for sensitive input values such as passwords. Only applicable to Plain value types.":[""],"A list of options the user can select from. If not provided, the user will be given a free-form field":["사용자가 선택할 수 있는 옵션의 목록입니다. 지정하지 않을 경우 사용자에게 자유 형식 필드가 제공됩니다."],"Variable":["변수 "],"Unknown interface type, must be one of [%s]":["알 수 없는 인터페이스 유형. [%s] 중 하나이어야 합니다 "],"Internal DB":["내부 DB"],"Random DB":[""],"EUI-64":[""],"Unknown IPAM type - can't continue":[""],"is not a valid MAC address":["올바른 MAC 주소가 아닙니다 "],"no free IP could be found in our DB":[""],"Unable to suggest IP: subnet %s don't have a DHCP proxy associated, a proxy is not in subnets organization or IPAM is not set to DHCP":[""],"Failed to fetch a free IP from proxy %{proxy}: %{message}":[""],"Network can't be blank":[""],"Prefix length can't be blank":[""],"no random free IP could be found in our DB, enlarge subnet range":[""],"Operating system was not set for host '%{host}'":[""],"%{os} medium was not set for host '%{host}'":[""],"Invalid medium '%{medium}' for '%{os}'":[""],"Invalid architecture '%{arch}' for '%{os}'":[""],"Random-based":[""],"MAC-based":[""],"Unable to find IP address for '%s'":[" '%s'의 IP 주소를 찾을 수 없습니다 "],"Unsupported password hash function '%s'":["지원되지 않는 암호 해시 함수 '%s'"],"start":["시작 "],"stop":["중지 "],"poweroff":["전원 끄기 "],"reboot":["재부팅 "],"reset":["재설정 "],"soft":["소프트 "],"cycle":["사이클 "],"state":["상태 "],"on":["켜기 "],"off":["끄기 "],"status":["상태 "],"ready?":["준비되셨습니까? "],"Invalid power state request: %{action}, supported actions are %{supported}":["잘못된 전원 상태 요청: %{action}, 지원되는 동작은 %{supported}입니다 "],"Unknown":["알 수 없음 "],"Failed to retrieve power status for %{host} within %{req_timeout} second.":[""],"Timeout has occurred while communicating with %s":["%s와 통신하는 도중 시간 초과되었습니다 "],"Error has occurred while communicating with %{cr}: %{e}":["%{cr}와 통신하는 도중 오류가 발생했습니다: %{e}"],"Unable to get BMC providers":["BMC 공급자를 가져올 수 없습니다 "],"Unable to get installed BMC providers":["설치된 BMC 공급자를 가져올 수 없습니다 "],"Unable to perform boot BMC operation":["boot BMC 작업을 실행할 수 없습니다 "],"Unable to perform power BMC operation":["power BMC 작업을 실행할 수 없습니다 "],"Unable to perform identify BMC operation":["identify BMC 작업을 실행할 수 없습니다 "],"Unable to perform lan BMC operation":["lan BMC 작업을 실행할 수 없습니다 "],"Unable to retrieve DHCP subnets":["DHCP 서브넷을 검색할 수 없습니다 "],"Unable to retrieve DHCP subnet":["DHCP 서브넷을 검색할 수 없습니다 "],"Unable to retrieve unused IP":["사용되지 않는 IP를 검색할 수 없습니다 "],"Unable to retrieve DHCP entry for %s":["%s의 DHCP 항목을 검색할 수 없습니다 "],"Unable to set DHCP entry":["DHCP 항목을 설정할 수 없습니다 "],"Unable to delete DHCP entry for %s":["%s의 DHCP 항목을 삭제할 수 없습니다 "],"Unable to set DNS entry":["DNS 항목을 설정할 수 없습니다 "],"Unable to delete DNS entry":["DNS 항목을 삭제할 수 없습니다 "],"Unable to retrieve the next available IP for subnet %{subnet} External IPAM.":[""],"Unable to add IP %{ip} to the subnet %{subnet} in External IPAM.":[""],"Unable to obtain groups from External IPAM.":[""],"Unable to obtain group %{group} from External IPAM.":[""],"Unable to obtain subnets in group %{group} from External IPAM.":[""],"Unable to obtain subnet %{subnet} from External IPAM.":[""],"Unable to obtain IP address for subnet %{subnet} in External IPAM.":[""],"Unable to delete IP %{ip} from the subnet %{subnet} in External IPAM.":[""],"Unable to detect features":["기능을 감지할 수 없습니다 "],"Unable to fetch logs":["로그를 가져올 수 없습니다"],"for proxy":["프록시의 경우 "],"Unable to get environments from Puppet":["Puppet에서 환경을 가져올 수 없습니다 "],"Unable to get environment from Puppet":["Puppet에서 환경을 가져올 수 없습니다 "],"Unable to get classes from Puppet for %s":["%s의 Puppet에서 클래스를 가져올 수 없습니다 "],"Unable to get PuppetCA autosign":["PuppetCA 자동 서명을 가져올 수 없습니다 "],"Unable to set PuppetCA autosign for %s":["%s의 PuppetCA 자동 서명을 설정할 수 없습니다 "],"Unable to delete PuppetCA autosign for %s":["%s의 PuppetCA 자동 서명을 삭제할 수 없음 "],"Unable to sign PuppetCA certificate for %s":["%s의 PuppetCA 인증서에 서명할 수 없습니다 "],"Unable to delete PuppetCA certificate for %s":["%s의 PuppetCA 인증서를 삭제할 수 없습니다 "],"Unable to get PuppetCA certificates":["PuppetCA 인증서를 가져올 수 없습니다 "],"Unable to create realm entry":["영역 항목을 생성할 수 없습니다 "],"Unable to read SSL certification or key for proxy communication, check settings for ssl_certificate, ssl_ca_file and ssl_priv_key and ensure they are readable by the foreman user.":[""],"Unable to set TFTP boot entry for %s":["%s의 TFTP 부트 항목을 설정할 수 없습니다 "],"Unable to delete TFTP boot entry for %s":["%s의 TFTP 부트 항목을 삭제할 수 없습니다 "],"Unable to fetch TFTP boot file":["TFTP 부팅 파일을 가져올 수 없습니다 "],"Unable to detect TFTP boot server":["TFTP 부트 서버를 감지할 수 없습니다 "],"Unable to create default TFTP boot menu":["기본값 TFTP 부트 메뉴를 생성할 수 없습니다 "],"Unable to detect version":["버전을 감지할 수 없습니다"],"Proxy reference should be { :relation => [:column_name, ...] }":[""],"Unable to initialize ProxyAPI class %s":["ProxyAPI 클래스 %s을(를) 초기화할 수 없습니다."],"Unable to connect":["연결할 수 없음"],"Could not locate CA certificate.":["CA 인증서를 찾을 수 없습니다."],"Invalid report":["잘못된 보고서 "],"Invalid log level: %s":["잘못된 로그 레벨: %s"],"Setting definition for '%s' not found, can not set":[""],"expected a value of type %s":[""],"unable to sign a non pending certificate":["보류 중이 아닌 인증서에 서명할 수 없습니다 "],"expecting %s used by hosts or inherited (check mismatches report).":[""],"Report \\\"%s\\\" is ready to download":[""],"Download Report":[""],"Regenerate Report":[""],"Open":[""],"must only contain alphanumeric or underscore characters":[""],"must contain valid hostnames":[""],"must be comma separated":[""],"with given ID not found":[""],"is not defined for host's %s":[""],"does not match selected subnet":["선택한 서브넷과 일치하지 않습니다 "],"%{value} is not a valid controller":["%{value}은(는) 올바른 컨트롤러가 아닙니다 "],"is too long (maximum is 254 characters)":[""],"Invalid HTTP(S) URL":[""],"can't contain spaces.":["공백을 포함할 수 없습니다."],"was not found":[""],"does not have the %s feature":[""],"is invalid. No provisioning template with name \\\"%{name}\\\" and kind \\\"%{kind}\\\" found. ":[""],"Consult \\\"Provisioning Templates\\\" page to see what templates are available.":[""],"must be a valid regexp":[""],"is not a valid public ssh key":[""],"MTU is not consistent across subnets":[""],"VLAN ID is not consistent across subnets":[""],"URL must be valid and schema must be one of %s":["URL이 유효하고 스키마가 %s 중 하나여야 합니다."],"System Status":["시스템 상태 "],"Available Providers":["사용 가능한 공급자 "],"Plugins":["플러그인"],"No smart proxies to show":["표시할 스마트 프록시가 없음 "],"Name":["이름 "],"Features":["기능 "],"Provider":["공급자 "],"Not Installed":["설치되지 않음 "],"To enable a provider, either install the OS package (e.g. foreman-libvirt) or enable the bundler group for development setup (e.g. ovirt).":["공급자를 활성화하려면 OS 패키지 (예: foreman-libvirt)를 설치하거나 개발 설정을 위한 번들러 그룹 (e.g. ovirt) 활성화합니다."],"No compute resource to show":["표시할 컴퓨터 리소스가 없음 "],"Type":["유형"],"No plugins found":["플러그인을 찾을 수 없습니다 "],"Description":["설명 "],"Author":["저자 "],"Support":["지원"],"API Resources":[""],"Automate Foreman via a simple and powerful API":[""],"Templates DSL":[""],"Get DSL reference for templates writing":[""],"Manual":["수동"],"Wiki":["위키"],"IRC":["IRC"],"You can find The Foreman on the %{liberachat} (irc.libera.chat) network. For general support, please visit #theforeman and for development specific related chat, please visit #theforeman-dev.":[""],"Forums":[""],"You can use the %{community_forums} to ask for help or advice, participate in discussions around challenges or ideas you have with Foreman.":[""],"community forums":[""],"Issue tracker":["문제 추적기 "],"We use Redmine to report and track bugs and feature requests, which can be found here:":["다음과 같이 버그 보고, 추적, 기능 요구에 Redmine을 사용합니다: "],"issue tracker":["문제 추적기 "],"System Information":["시스템 정보 "],"Version %{version} %{copyright} 2009-%{year} Paul Kelly and %{author}":[""],"Instance %{uuid}":[""],"Access denied":["접근 거부됨"],"Resource %{resource_name} not found by id '%{id}'":["리소스 %{resource_name}을(를) ID '%{id}'로 찾을 수 없습니다 "],"Unable to authenticate user %s":["사용자 %s을(를) 인증할 수 없습니다 "],"Media type in 'Content-Type: %s' is unsupported in API v2 for POST and PUT requests. Please use 'Content-Type: application/json'.":[""],"Environments got deprecated from this endpoint.":[""],"Search fields":[""],"Field name":[""],"Possible values":[""],"Template writing help":[""],"Content":["컨텐츠"],"What is ERB":[""],"Writing ERB templates":[""],"Indentation in ERB templates":[""],"Basic building blocks - macros, variables, methods":[""],"Conditional statements":[""],"Iterating over Arrays":[""],"Built-in variables":[""],"Inputs":["입력"],"Snippets":[""],"Safe mode":[""],"Disabling Safe mode":[""],"This section provides an introduction to ERB templates and the rendering engine, and illustrates the core principles with examples. Note that the default templates that are provided with the installation are also a good source of ERB syntax examples.":[""],"Embedded Ruby (ERB) is a tool for generating text files based on templates that combine plain text with Ruby code. Foreman uses ERB syntax in the following cases:":[""],"Provisioning templates":["프로비저닝 템플릿 "],"Templates for partition tables":[""],"Report templates":[""],"Smart Class Parameters":[""],"Parameters":["매개 변수 "],"Remote execution job templates":[""],"When the system asks for evaluated template, the code in the ERB tags is executed and the variables are replaced with their current values. This process is referred to as rendering. Typically rendering occurs during provisioning, when Kickstart file is asked by Anaconda or partition table is about to be deployed. Rendering also happens when a Remote Execution job is triggered to render the script to be executed. While the ERB exposes the power of programming language executed on the application server, the rendering mechanism has the safemode rendering option enabled by default, which prevents any harmful code being executed from templates.":[""],"Each template type rendering capabilities slightly differ, e.g. a provisioning template is always rendered for a single host object and therefore a @host variable is defined. Another example is a report template, where report formatting specific macros are available.":[""],"Writing ERB Templates":[""],"The following tags are the most important and commonly used in ERB templates":[""],"All Ruby code is enclosed within <code><&#37; &#37;></code> in an ERB template. The code is executed when the template is rendered. It can contain Ruby control flow structures as well as application-specific macros and variables. For example:":[""],"Note that there is no output from tags starting with <% when the template is rendered.":[""],"This provides the same functionality as <code><%</code> but when the template is executed, the code output is inserted into the template. This is useful for variable substitution, for example:":[""],"Note that words starting with <code>@</code> are instance variables. When the template is rendered, some instance variables are automatically predefined. Whether you can use a predefined variable depends on the template type, for example, the variable @host is available for the provisioning template, partition tables, and remote execution jobs.":[""],"Note that if you enter an incorrect instance variable, no output is returned. However, if you try to call a method on an incorrect variable, the following error message returns:":[""],"By default, a newline character is inserted after a Ruby block if it is closed at the end of a line:":[""],"To change the default behavior, modify the enclosing mark with <code>-&#37;></code>:":[""],"This is used to reduce the number of lines, where Ruby syntax permits, in rendered templates. White spaces in ERB tags are ignored.":[""],"The following example demonstrates how this is used to to remove unnecessary newlines between a FQDN and IP address:":[""],"Note the extra space before IP, the <code>-&#37;></code> removes the new line character only if there is no other text after it. Therefore the white space needs to be at the new line.":[""],"Encloses a comment that is ignored during template rendering:":[""],"This generates no output. However if the closing tag was <code>&#37;></code> without the dash, it would generate a new line":[""],"Because of the varying lengths of the ERB tags, indenting the ERB syntax might seem messy. ERB syntax ignores white space. One method of handling the indentation is to declare the ERB tag at the beginning of each new line and then use white space within the ERB tag to outline the relationships within the syntax, for example:":[""],"The Ruby code inside of the ERB tags typically contain expressions. They consist of program flow control terminals, variables, macros. Variables and macros evaluates to objects. Each object has set of allowed methods that can be called on it. These methods can return objects.":[""],"An example of a control flow terminal is an if condition or for each cycle. Macros are functions called by their name without specifying any object, e.g. %{load_hosts} or %{input}. See all available macros %{all_macros}. Example of object class is an %{integer}, String, %{host}, %{subnet}, %{user}. Calling a method on an object is denoted by <code>.</code>. For example <code>@host.fqdn</code> expression is an instance variable that holds and evaluates to an object of a Host, on which the fqdn method is called. To find the list of all available methods on objects, see the documentation for each template type.":[""],"here":["여기 "],"In the following example, <code>if</code> and <code>==</code> are terminals, <code>@host</code> is instance variable holding the object of the %{host_object_link} class, <code>.domain</code> is the call of the method named %{domain_method_link} on this %{host_object_link} object. That returns the %{domain_object_link} object. <code>.name</code> is then calling of a method %{name_method_link} on this %{domain_object_link} object. The resulting name of the domain is then compared with fixed string object example.com":[""],"In your templates, you might perform different actions depending on which value exists. To achieve this, you can use conditional statements in your ERB syntax.":[""],"In the following example, the ERB syntax searches for a specific host name and returns an output depending on the value it finds:":[""],"Note that the else branch is optional. Also multiple conditions can be specified using elsif, but that is usually better written using a case/when construct. See the example below":[""],"Note that the else branch is optional and can be omitted.":[""],"Sometimes it is necessary to iterate over arrays in order to retrieve the information. This is typically required in report templates when loaders are used, however the same technique is useful elsewhere too.":[""],"For example, this can be useful to configure all the Host NICs.":[""],"As you can see in the example above, the <code>interfaces</code> method on Host object returns a new object of type Collection. For simplicity, think of it as an array of all host interfaces. To process every item in this array, a method <code>each</code> is used.":[""],"This is the simple example of iterating over array of two interfaces and only printing the IP address of each. In reality, the interface object can be used to fetch more information, as shown in the following example. To see all available methods, see the documentation for %s object.":[""],"The information from above can be used e.g. to create a NetworkManager configuration file for each interface in the provisioning template.":[""],"In a report template, loader macros are used most of the time. Iterating over results of these is a little different. It is important to use <code>each_record</code> instead of <code>each</code>, because loaders load objects in batches and each record in fact represents the batch. Otherwise the construct looks the same, as shown in the following example":[""],"Templates can access built-in instance variables denoted by <code>@</code>.":[""],"Template":["템플릿"],"Name of the template being rendered, \\\"Unnamed\\\" when the template does not have a name, e.g. preview on unsaved template.":[""],"\\\"preview\\\" or \\\"real\\\", this can be used to change the behavior for previewing the template":[""],"Represents the host object for which the template is rendered.":[""],"To customize a template for each individual rendering, various inputs can be defined. Inputs are of several types. Different template types support different input types.":[""],"A user needs to specify the value when the template is rendered. A value type can also be specified, determining the filling mode. A plain value can be specified as an arbitrary string, A search value allows the auto-completion in the UI, A date expects a date value and UI provides a calendar helper. A user input can have a default value set. The value can be hidden with asterisks, which is useful for sensitive information. For a plain value type, multiple options can be inserted. During the rendering, a user must pick one of the specified values.":[""],"This input value is fed from a specified fact for the host, which the template is being rendered for. This way the template can access e.g. the host cpus number.":[""],"This input value is fed from parameter values calculated for the host, which the template is being rendered for. This way the template can access a value of a global parameter, which is applied to every host. If that parameter would be overridden e.g. on a host's subnet level, this value would be fed to this input.":[""],"Puppet parameter":["Puppet 매개 변수"],"Similar to the variable input type, however, it loads the value for a specific smart class parameter. The user must specify the Puppet class and the smart class parameter name when defining the input.":[""],"All inputs defined for a single template must have a have unique name that is then used in ERB code. Inputs can optionally have a description that is rendered as an inline help when the template is rendered.":[""],"Once a template input is defined in the Inputs tab and the template is saved, it can be used in the ERB. To load a value specified through this input, a global macro <code>input</code> is used. The input name must be specified as the argument. E.g. the example below will load the value through input called cpus.":[""],"While rendering the template in preview mode, the input either loads the value or uses a placeholder in case the input is not ready for rendering. If the template is rendered and the input is not ready, an error is thrown. The readiness criteria differs per input type, e.g. for Fact inputs linked to a host's fact with the name \\\"cpu_count\\\" , when @host contains a value for the fact, the input is ready.":[""],"As mentioned above, different template types support different template inputs. See the table below for available combinations.":[""],"Template type":[""],"Available input types":[""],"Snippets are smaller, reusable templates that can be used to customize other templates. For example, a bootstrap procedure that must run on every provisioned host, but to achieve this requires modifying multiple kickstart templates. To avoid duplication, a snippet can be used. Assuming there is a snippet created with a name Bootstrap, following example will inject it into a template":[""],"Safe Mode is a safety mechanism that is in place to prevent accidents from occurring. It contains a list of Ruby methods that can be used safely in a template. When a safe-mode-protected method is called accidentally, rendering fails with the error that says \\\"Safemode doesn't allow to access ...\\\".":[""],"Aim to use macros and variables that are already available with Safe Mode enabled in your template. If you are looking for some information that you are not able to retrieve via allowed methods or macros listed in this documentation, you can consider disabling the Safe Mode. Doing that, you will be able to access all internal application variables and methods directly, when the template is rendered.":[""],"Be aware, this is dangerous and it can cause performance and security issues. Disabling safe mode allows any Ruby code to be executed on the server. Any application user that can edit the template can modify the template, so that when it is rendered, it spawns a shell process and runs an arbitrary command in it. These commands are run as the \\\"foreman\\\" user and are still restricted by SELinux policy. Disabling Safe Mode is only recommended in a trusted environment.":[""],"In order to disable Safe mode, navigate to Administer -> %{settings_link} -> Provisioning tab and search for a setting called \\\"Safemode rendering\\\". Value \\\"No\\\" means, rendering is unprotected and potentially dangerous. This installation has currently safe mode: <b>%{status}</b>.":[""],"enabled":[""],"disabled":[""],"Create Architecture":[""],"Architecture|Name":["이름 "],"<b>Foreman</b> audit summary":["<b>Foreman</b> 감사 요약"],"Displaying %{num_audits} of %{total_audits} audit":[""],"No audit changes for this period":["이 기간의 감사 변경 사항 없음"],"Full audits list":["전체 감사 목록"],"Foreman audit summary":["Foreman 감사 요약"],"External Documentation":[""],"Edit External Authentication Source":[""],"LDAP server":["LDAP 서버 "],"Account":["계정 "],"Attribute mappings":["속성 매핑 "],"Test LDAP connectivity":["LDAP 연결 테스트"],"Choose a server type":["서버 유형 선택 "],"Server type":["서버 유형 "],"Use this account to authenticate, <i>optional</i>":["인증을 위해 이 계정을 사용합니다. <i>옵션</i>"],"Base DN":["기본 DN"],"Groups base DN":["그룹의 기본 DN "],"Use NIS netgroups instead of posix groups.":[""],"By default we map user groups to standard LDAP Group objects. FreeIPA and POSIX LDAP server types supports alternative way of grouping users through Netgroups. Enable this checkbox if using Netgroups is preferred instead of standard groups.":[""],"Custom LDAP search filter, <i>optional</i>":["사용자 정의 LDAP 검색 필터, <i>옵션</i>"],"LDAP users will have their Foreman account automatically created the first time they log into Foreman":["LDAP 사용자는 처음으로 Foreman에 로그인할 때 자동으로 Foreman 계정을 생성합니다 "],"External user groups will be synced on login, else relies on periodic cronjob to check group membership":["외부 사용자 그룹은 로그인 시에 동기화됩니다. 또는 주기적인 cronjob을 통해 그룹 멤버쉽을 확인합니다."],"e.g. uid":["예: uid"],"e.g. givenName":["예: givenName"],"e.g. sn":["예: sn"],"e.g. mail":["예: mail"],"Photo attribute":["사진 속성 "],"e.g. jpegPhoto":["예: jpegPhoto"],"Create":["생성 "],"LDAP Documentation":[""],"AuthSource|Name":["이름 "],"AuthSource|Host":["호스트 "],"AuthSource|Onthefly register":["즉시 등록 "],"AuthSource|LDAPS":["LDAP"],"Create LDAP Auth Source":[""],"Autosign Entries":["자동 서명 항목 "],"Add Autosign entry":["자동 서명 항목 추가"],"View list":["목록 표시"],"New Autosign Entry":["새 자동 서명 항목 "],"Save":["저장"],"Bookmark|Name":["이름 "],"Bookmark|Query":["쿼리 "],"Bookmark|Controller":["컨트롤러 "],"Bookmark|Public":["공개 "],"You don't seem to have any bookmarks. Bookmarks are saved search queries. To save them, click on 'Bookmark this search' on the dropdown next to every search button.":[""],"Permission denied":["권한이 거부되었습니다"],"You are not authorized to perform this action.":["이 작업을 수행할 권한이 없습니다."],"Please request one of the required permissions listed below from a Foreman administrator:":["Foreman 관리자에게 아래에 나열된 필수 권한 중 하나를 요청하십시오."],"Back":["뒤로 "],"not found":["찾을 수 없음"],"Please try to update your request":["요청을 업데이트하십시오 "],"Oops, we're sorry but something went wrong":["오류. 문제가 발생했습니다 "],"If you feel this is an error with Foreman itself, please open a new issue with":["이것이 Foreman 자체의 오류라고 생각되시면 새로운 문제로 제출하십시오"],"Foreman ticketing system":["Foreman 티켓 생성 시스템 "],"Please include in your report the full error log that can be acquired by running: ":[""],"Search your logs for request-id":[""],"When using external logging, search for request UUID":[""]," and it is highly recommended to also attach the foreman-debug output.":[""],"Service unavailable":["서비스를 이용할 수 없습니다."],"Failure: %s":["오류: %s"],"Unknown records found in the database":[""],"Foreman has detected definitions of unknown classes in your database. This can happen after a plugin removal which did not properly cleaned up data it created. Would you like to delete all records from SQL table <b>\\\"%{table}\\\"</b> with column <b>\\\"%{column}\\\"</b> having the value <b>\\\"%{value}\\\"</b>":[""],"Automatic cleanup has failed, there are probably other records still referencing this data, please do the clean up manually in the database and then refresh this page.":[""],"Creating a DB backup before proceeding is highly recommended!":[""],"The data deletion can not be undone, are you sure you want to proceed?":[""],"Please contact your administrator, the request id for finding the logs: \\\"%s\\\"":[""],"Operating system":["운영 체제 "],"No options available for selected Architecture":[""],"OS Image":["OS 이미지 "],"Build from OS image":["OS 이미지에서 빌드 "],"Media":["미디어 "],"No options available for selected Operating System":[""],"Partition Table":["파티션 테이블 "],"PXE loader":[""],"DHCP filename option to use. Set to None for non-PXE method (e.g. iPXE). Auto-suggested, use OS parameter 'pxe-loader' to override.":[""],"Override":["덮어쓰기 "],"Override this value":["이 값 덮어쓰기 "],"Remove":["삭제 "],"Add Parameter":["매개 변수 추가 "],"Create Parameter":[""],"Parameter|Name":["이름 "],"Parameter|Value":["값 "],"Parameter|Type":[""],"Create Global Parameter":[""],"Foreman allows to define a hierarchy of parameter inheritance, where global parameters accessible from any manifest.":[""],"Compute profile":["컴퓨터 프로파일 "],"Compute resource":["컴퓨터 리소스 "],"New %s":["새 %s"],"Edit Compute profile":["컴퓨터 프로파일 편집 "],"Create Compute Profile":[""],"Rename":["이름 변경 "],"Click on the link of a compute resource to edit its default VM attributes.":["기본값 VM 속성을 편집하기 위해 컴퓨팅 리소스 링크를 클릭합니다. "],"Compute Resource":["컴퓨터 리소스 "],"VM Attributes (%s)":["VM 속성 (%s)"],"unspecified":["지정되어 있지 않음 "],"A compute profile is a way of expressing a set of defaults for VMs created on a specific compute resource that can be mapped to an operator-defined label. This means an administrator can express, for example, what 'Small', 'Medium' or 'Large' means on all of the individual compute resources present for a given installation.":[""],"Choose a provider":["공급자 선택 "],"Access Key":["액세스 키"],"Secret Key":["비밀 키 "],"Region":["지역 "],"Load Regions":["지역 로드 "],"Google Project ID":["글로벌 프로젝트 ID"],"Client Email":["클라이언트 이메일 "],"Certificate Path":[""],"The file path where your JSON file is located":[""],"Zone":["영역 "],"Load Zones":[""],"e.g. qemu://host.example.com/system":["예: qemu://host.example.com/system"],"Display Type":[""],"Console Passwords":[""],"Set a randomly generated password on the display connection":["디스플레이 연결 시 임의로 생성된 암호를 설정합니다"],"URL":["URL"],"Use /v2 or /v3 to force API version, e.g. http://openstack:5000/v2.0/tokens or http://openstack:5000/v3/auth/tokens":[""],"Project (Tenant) name":[""],"Project name (v3) or Tenant name (v2). Can be retrieved via CLI or RC file.":[""],"User domain":[""],"Can be retrieved via CLI or RC file, e.g. 'redhat.com'. Only for v3 authentication.":[""],"Project domain name":[""],"Can be retrieved via CLI or RC file. Can be left blank. Only for v3 authentication.":[""],"Project domain ID":[""],"Can be retrieved via CLI or RC file. Can be set to 'default'. Only for v3 authentication.":[""],"Allow external network as main network":["외부 네트워크를 기본 네트워크로 허용"],"e.g. https://ovirt.example.com/ovirt-engine/api":[""],"e.g. admin@internal":["예: admin@internal"],"Datacenter":["데이터 센터 "],"Quota ID":["쿼터 ID"],"Default Display Type":[""],"Default VNC Keyboard":[""],"X509 Certification Authorities":["X509 인증 기관 "],"Optionally provide a CA, or a correctly ordered CA chain. If left blank, a self-signed CA will be populated automatically by the server during the first request.":["옵션으로 CA 또는 올바르게 정렬된 CA 체인을 지정합니다. 빈 칸으로 두면 처음 요청시 서버가 자동 서명된 CA를 자동으로 설정하게 됩니다."],"VCenter/Server":["VCenter/서버"],"Fingerprint":["지문 "],"VNC consoles are unsupported on VMware ESXi 6.5 and later.":[""],"VNC Console Passwords":[""],"Set a randomly generated password on the VNC display connection":[""],"Enable Caching":[""],"Cache slow calls to VMWare to speed up page rendering":[""],"Create Compute Resource":[""],"ComputeResource|Name":["이름 "],"Associate VMs":["VM 연결 "],"Associate VMs to Foreman hosts":["VM을 Foreman 호스트에 연결 "],"Refresh Cache":[""],"Virtual Machines":["가상머신"],"SSH keys":[""],"Compute profiles":["컴퓨터 프로파일 "],"Property":["속성 "],"Loading virtual machines information ...":["가상 머신 정보 로딩 중 ..."],"Create Image":[""],"Loading images information ...":["이미지 정보 로드 중 ..."],"Loading SSH keys information ...":[""],"VM Attributes":["VM 속성 "],"Enabled":["활성화됨 "],"Disabled":["비활성화됨 "],"Operating systems API supported?":[""],"Console passwords":["콘솔 암호 "],"Caching":[""],"Foreman supports creating and managing hosts on a number of virtualization and cloud services - referred to as “compute resources” - as well as bare metal hosts.":[""],"There was an error listing %{listing}: %{errors}":[""],"Network interfaces":["네트워크 인터페이스 "],"Add Interface":["인터페이스 추가 "],"add new network interface":["새 네트워크 인터페이스 추가 "],"No networks found.":["네트워크를 찾을 수 없습니다."],"Storage":["스토리지 "],"remove storage volume":["스토리지 볼륨 삭제"],"Add Volume":["볼륨 추가 "],"add new storage volume":["새 스토리지 볼륨 추가 "],"Unable to define volumes:":[""],"Flavor":["종류 "],"Please select an image":["이미지를 선택하십시오"],"No preference":["설정이 없습니다 "],"Availability zone":["사용 가능한 영역 "],"EC2":["EC2"],"Subnet":["서브넷"],"Security groups":["보안 그룹 "],"Public":["공개 "],"Private":["비공개"],"Managed IP":["관리 IP"],"Tags":["태그"],"Key":["키 "],"Add tag":[""],"Remove tag":[""],"Machine type":["시스템 유형 "],"Associate Ephemeral External IP":[""],"Size (GB)":["크기 (GB)"],"CPUs":["CPU"],"CPU mode":[""],"Memory":["메모리 "],"Power ON this machine":["컴퓨터의 전원 켜기 "],"Start":["시작 "],"Image to use":["사용할 이미지 "],"Network type":["네트워크 유형 "],"No networks":["네트워크 없음 "],"There was no active bridge interface found in libvirt, if it does not support listing, you can enter the bridge name manually (e.g. br0)":[""],"NIC type":["NIC 유형 "],"Storage pool":["스토리지 풀 "],"Tenant":["테넌트 "],"Internal network":["내부 네트워크 "],"Floating IP network":["부동 IP 네트워크 "],"Boot from volume":["볼륨에서 부팅"],"Create new boot volume from image":["이미지의 새 부팅 볼륨 생성"],"New boot volume size (GB)":["새 부팅 볼륨 크기(GB)"],"Defaults to image size if left blank":["비워 둘 경우 이미지 크기로 기본 설정됩니다."],"Scheduler hint filter":[""],"JSON object of the scheduler hint":[""],"Server hint data":[""],"Server group":[""],"Cluster":["클러스터"],"Blank template":[""],"oVirt/RHEV template to use":["사용할 oVirt/RHEV 템플릿"],"Custom instance type":[""],"oVirt/RHEV instance type. Provided memory, sockets and cores values will be overriden by instance types values":[""],"Instance type":[""],"Cores per socket":["소켓당 코어 수 "],"Sockets":["소켓 "],"Highly Available":[""],"Keyboard":[""],"Vnic Profile":[""],"Interface type":[""],"Storage domain":["스토리지 도메인 "],"Uses thin provisioning if unchecked":["선택 해제되어 있을 경우 씬 프로비저닝을 사용합니다 "],"Preallocate disk":["디스크 사전 할당 "],"Wipe disk after delete":[""],"Disk interface":[""],"Bootable":["부팅가능"],"Only one volume can be bootable":["하나의 볼륨만 부팅할 수 있습니다 "],"Please Select an Image":["이미지를 선택하십시오"],"Memory (MB)":["메모리 (MB)"],"Firmware":[""],"Folder":["폴더 "],"Guest OS":["게스트 OS"],"Virtual H/W version":["가상 H/W 버전 "],"Memory hot add lets you add memory resources for a virtual machine while the machine is powered on.":["메모리 동적 추가는 가상 머신이 작동하는 동안 가상 머신의 메모리 리소스를 추가할 수 있는 기능입니다."],"Memory hot add":["메모리 동적 추가"],"CPU hot add lets you add CPU resources for a virtual machine while the machine is powered on.":["CPU 동적 추가는 가상 머신이 작동하는 동안 가상 머신의 CPU 리소스를 추가할 수 있는 기능입니다."],"CPU hot add":["CPU 동적 추가"],"Add a CD-ROM drive to the virtual machine.":[""],"CD-ROM drive":[""],"Boot order":[""],"Has effect only for network based provisioning":[""],"Annotation Notes":[""],"Import VM %s":[""],"Virtual Machines on %s":["%s 상의 가상 머신 "],"Compute Resouces":[""],"VMs":[""],"State":["상태 "],"Power":["전원"],"Hypervisor":[""],"New Virtual Machine":["새 가상 머신 "],"Properties":["속성 "],"Machine Type":["시스템 유형 "],"VCPU(s)":["VCPU"],"UUID":["UUID"],"Allocated":["할당됨 "],"Display":["표시 "],"NIC":["NIC"],"using %{allocation} GB out of %{capacity} GB, %{pool_name} storage pool":["%{capacity} GB 중 %{allocation} GB, %{pool_name} 스토리지 풀 사용 중 "],"Path":["경로"],"Running on":["실행 "],"using %s":["%s 사용 중 "],"Annotation notes":[""],"Last report":["마지막 보고 "],"Origin":[""],"Restart<br>Failures":["다시 시작<br>실패 "],"Delete report for %s?":["%s의 보고서를 삭제하시겠습니까? "],"Level":["레벨 "],"Message":["메세지 "],"Nothing to show":["표시할 것이 없습니다 "],"Reported at %s ":["%s 에 보고 "],"Host times seem to be adrift!":[""],"Host reported time is <em>%s</em>":["호스트 보고 시간은 <em>%s</em>입니다 "],"Foreman report creation time is <em>%s</em>":["Foreman 보고서 생성 시간은 <em>%s</em>입니다 "],"Which is an offset of <b>%s</b>":["<b>%s</b>의 오프셋 "],"Other reports for this host":["이 호스트의 다른 보고서 "],"Config Reports":[""],"Run Distribution Chart":[""],"Minutes Ago":["분 전 "],"Number Of Clients":["클라이언트 수 "],"Hosts in Build mode or with Build errors":[""],"No Hosts are in build mode or have build errors.":[""],"Build Duration":[""],"Token Expiry":[""],"No hosts available.":[""],"Created":["생성 일시 "],"No interesting reports received in the last week":["지난 1 주일 동안 보고서가 수신되지 않았습니다 "],"Host Configuration Chart":["호스트 설정 차트 "],"Hosts that had performed modifications without error":["오류 없이 변경한 호스트 "],"Hosts in error state":["오류 상태에 있는 호스트 "],"Good host reports in the last %s":["지난 %s의 호스트 보고서 "],"Good host with reports":[""],"Hosts with no reports":["보고서가 없는 호스트 "],"Host Configuration Status":["호스트 설정 상태 "],"Total Hosts: %s":["총 호스트: %s"],"Overview":["개요 "],"Get default dashboard widgets":["기본 대시보드 위젯 가져오기"],"%s widget loading...":[""],"DNS Domain":[""],"Full name describing the domain":["도메인을 나타내는 전체 이름 "],"Create Domain":[""],"Domain|Fullname":["성명 "],"Foreman considers a domain and a DNS zone as the same thing. That is, if you are planning to manage a site where all the machines are of the form hostname. somewhere.com then the domain is somewhere.com. This allows Foreman to associate a puppet variable with a domain/site and automatically append this variable to all external node requests made by machines at that site. The fullname field is used for human readability in reports and other pages that refer to domains, and also available as an external node parameter.":[""],"Show all %s facts with the same value":[""],"Fact Values":["정보 값 "],"FactValue|Value":["값 "],"FactValue|Origin":[""],"Reported at":["보고 "],"You don't seem to have any facts yet. If you wish to configure fact pushing, please follow the documentation.":["아직 팩트가 없습니다. 팩트 푸시를 구성하려면 설명서를 따르십시오."],"Selected role":["선택된 역할 "],"Permission":["권한 "],"Selected resource type does not support granular filtering, therefore you can't configure granularity":["선택된 리소스 유형은 세분화된 필터링을 지원하지 않기 때문에 단위를 설정할 수 없습니다 "],"Filters inherit organizations and locations associated with the role by default. If override field is enabled, <br> the filter can override the set of its organizations and locations. Later role changes will not affect such filter.<br> After disabling the override field, the role organizations and locations apply again.":[""],"If the unlimited field is enabled, the filter applies to all resources of the selected type. If the unlimited </br> field is disabled, you can specify further filtering using Foreman search syntax in the search field.</br> If the role is associated with organizations or locations, the filters are not considered unlimited</br> as they are scoped accordingly.":[""],"%s Filters":[""],"Edit %s Resource Filter":[""],"%s filters":[""],"Filters":["필터"],"Create Filter":[""],"Role":["역할 "],"Filter|Resource":["리소스 "],"Filter|Permissions":["권한 "],"Filter|Unlimited":["무제한 "],"Filter|Override":[""],"Filter|Search":["검색 "],"Disable overriding":[""],"Delete filter?":["필터를 삭제하시겠습니까?"],"Hostname":["호스트 이름 "],"<b style=\\\"color: #6bb5df;\\\">%{hosts_sum}</b>\\n <p>Changed</p>":[""],"<b style=\\\"color: #6bb5df;\\\">%{out_of_sync_sum}</b>\\n <p>Out of sync</p>":[""],"<b style=\\\"color: #6bb5df;\\\">%{disabled_sum}</b>\\n <p>Disabled</p>":[""],"message":["메세지 "],"No logs to show":["표시할 로그가 없습니다"],"Total of one host":[""],"None!":["없음!"],"Last Report":["마지막 보고 "],"<b>Foreman</b> Configuration Management Error Report":[""],"For more information":["자세한 내용은 다음을 참조하십시오."],"<b>Foreman</b> Build Complete":["<b>Foreman</b> 빌드 완료"],"IP":["IP "],"Your host has finished building:":["호스트에서 빌드가 완료되었습니다:"],"Hostname:":["호스트명:"],"IP:":["IP:"],"View in Foreman:":["Foreman에서 보기:"],"<b>Foreman</b> Configuration Management Summary":[""],"Summary from %{time} ago to now":["%{time} 전에서 현재까지의 요약"],"Summary report from Foreman server at %{foreman_url}":["%{foreman_url}의 Foreman 서버에서 가져온 요약"],"Hosts with interesting values (changed, failures etc)":["주목할 값이 있는 호스트(변경된 값, 오류 등)"],"Hosts which do not have recent reports from configuration management":[""],"Hosts which Foreman reporting is disabled":["Foreman 보고가 비활성화된 호스트"],"Hostgroup":["호스트 그룹 "],"Parent":["부모 "],"Bare Metal":["베어 메탈 "],"Deploy on":["배포 "],"IPv4 Subnet":[""],"IPv6 Subnet":[""],"Password must be 8 characters or more":["암호는 8자 이상이어야 합니다 "],"Parent Parameters":[""],"Host Group Parameters":[""],"Create Host Group":[""],"Hostgroup|Name":["이름 "],"Hosts including Sub-groups":[""],"Host Groups allow hosts with common configuration to be defined and grouped together.\\n Nested groups will inherit from their parent(s).\\n This is then treated as a template and is selectable during the creation of a new host and ensures that the host is configured in one of your pre-defined states.":[""],"Create %s":["%s 생성 "],"Select Hosts":["호스트 선택"],"Assign Selected Hosts":["선택된 호스트 지정 "],"<b class='select_count'>0</b> selected":["<b class='select_count'>0</b> 선택 "],"Assign to %s":["%s에 지정 "],"Chassis":["섀시 "],"Boot device":["부트 장치 "],"Netmask":["넷마스크 "],"MAC":["MAC"],"Gateway":["케이트웨이"],"No %s with BMC feature found, install one, enable BMC module and register it.":[""],"Smart Proxy":["스마트 프록시 "],"Missing BMC feature associated with %s.":[""],"Virtual machine settings cannot be edited on an existing machine in %s":["%s의 기존 가상 머신에서는 가상 머신 설정을 편집할 수 없습니다."],"Failed connecting to %s":["%s로 연결 실패 "],"Errors: %s":["오류: %s"],"'%{host}' not found on '%{resource}'":["'%{host}'을(를) '%{resource}'에서 찾을 수 없습니다 "],"'%{host}' could be deleted or '%{resource}' is not responding.":["'%{host}'이(가) 삭제되었거나 '%{resource}'이(가) 응답하지 않습니다."],"Conflicts have been detected":["충돌이 감지되었습니다 "],"The following entries were found conflicting with what foreman wanted to apply.":["다음 항목은 foreman이 적용하려고 한 내용과 충돌하는 것으로 발견되었습니다. "],"Please review them carefully, if you are certain that they should be removed, please click on overwrite.":["이를 주의 깊게 확인하십시오, 제거해야 할 경우 덮어쓰기를 클릭하십시오. "],"DHCP lease conflicts have been detected":["DHCP 임대 충돌이 감지되었습니다 "],"Please correct the error(s) below and submit your changes again.":["아래 오류를 수정하고 변경 사항을 다시 보내십시오. "],"Virtual Machine":["가상머신"],"Interfaces":["인터페이스 "],"Additional Information":["추가 정보 "],"This value is used also as the host's primary interface name.":["이 값은 호스트의 기본 인터페이스 이름으로도 사용됩니다."],"Deploy On":[""],"Host Parameters":["호스트 매개 변수 "],"Owned By":["소유자 "],"Hardware Model":["하드웨어 모델 "],"For initial configuration of the host run this command:":[""],"Host template":[""],"This host can not be configured as no registration template was set.":[""],"Some of the interfaces are invalid. Please check the table below.":["일부 인터페이스는 사용할 수 없습니다. 아래 표를 확인하십시오."],"Identifier":["식별자 "],"IPv4 Address":["IPv4 주소 "],"FQDN":["FQDN"],"Ok":["확인"],"<b class='select_count'>0</b> of <b>%s</b> selected":[""],"Select all items on this page":[""],"items selected. Uncheck to Clear":["항목이 선택되어 있습니다. 삭제하려면 선택 해제합니다 "],"Model":["모델 "],"Please Confirm":["확인해 주십시오 "],"Report Status":["보고서 상태 "],"MTU":[""],"Provisioning Method":["프로비저닝 방법 "],"Password must be 8 characters or more.":[""],"The password is currently set by %s.":[""],"Resolve":["문제 해결 "],"Display the templates that will be used to provision this host":["호스트 프로비저닝에 사용할 템플릿 표시 "],"in Progress":["진행 중 "],"in progress":["진행 중"],"Templates resolved for this operating system":["이 운영 체제에 대해 확인된 템플릿"],"Number of Events":["이벤트 수 "],"Time in Seconds":["시간 (초) "],"Remember hosts selection for the next bulk action":[""],"Fix %s on Mismatch":["불일치로 인해 %s 수정"],"Fail on Mismatch":["불일치로 인해 실패 "],"Template Type":["템플릿 유형 "],"Review":["확인 "],"Safemode Review":[""],"Assign Hosts to %s":["%s에 호스트 지정 "],"Clone Host %s":["호스트 %s 복제 "],"Generated %s ago":["%s 전에 생성 "],"Back to host":["호스트로 돌아가기 "],"Console output may be out of date":["콘솔 출력이 오래된 것일 수 있습니다 "],"Ctrl-Alt-Del":["Ctrl-Alt-Del"],"Connecting (unencrypted) to: %s":["다음에 연결 중 (암호화 해제): %s"],"VMRC Console":[""],"To launch the VMRC console, you need the VMRC software installed.":[""],"Download VMRC":[""],"Launch Console":[""],"Opening VMRC Console":[""],"Unmanage host":["관리되지 않는 호스트 "],"Manage host":["호스트 관리 "],"Disassociate host":["호스트 연결 해제 "],"Single host on this page is selected.":[""],"Select this host":[""],"Provision":["프로비저닝 "],"these hosts for a build operation on next boot":["다음 부팅 시 빌드 작업을 위한 호스트 "],"Reboot now":["지금 다시 시작 "],"This <b>will delete</b> the linked VMs and their disks, and is irreversible.":[""],"It is irreversible, but VMs and their disks <b>will not be deleted</b>.":[""],"This might take a while, as all hosts, facts and reports <b>will be deleted</b> as well. %s This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Disable alerts for selected hosts":["선택한 호스트의 통지 비활성화 "],"Disassociate the selected hosts from their VMs":["VM에서 선택된 호스트의 연결을 해제 "],"The list is excluding %{count} %{link_start}physical host%{link_end}.":[""],"Enable alerts for selected hosts":["선택한 호스트의 통지 활성화 "],"Sorry, these hosts do not have parameters assigned to them, you must add them first.":["죄송합니다. 이 호스트에 할당된 매개 변수가 없습니다. 먼저 매개 변수를 추가해야 합니다. "],"Enable this host for provisioning":["프로비저닝을 위해 호스트 활성화 "],"What ever text(or ERB template) you use in here, would be used as your OS disk layout options If you want to use the partition table option, delete all of the text from this field":["여기에서 사용하는 텍스트 (또는 ERB 템플릿)가 무엇이든 이는 OS 디스크 레이아웃 옵션으로 사용됩니다. 파티션 테이블 옵션을 사용하고자 할 경우 필드에서 모든 텍스트를 삭제합니다."],"List of hosts which answer to the provided query":["제공되는 쿼리에 응답하는 호스트 목록 "],"Rebuild orchestration configuration":["오케스트레이션 구성 다시 빌드"],"The following errors may prevent a successful build:":["다음과 같은 오류로 인해 빌드가 정상적으로 진행되지 않을 수 있습니다: "],"Check again":["다시 확인 "],"Edit Host":["호스트 편집 "],"Select host group":["호스트 그룹 선택 "],"*Clear host group*":["*호스트 그룹 삭제*"],"Select Location":["위치 선택 "],"Select Organization":["조직 선택 "],"select an owner":["소유자 선택 "],"Select desired state":["원하는 상태 선택"],"Details":["상세 정보 "],"Metrics":["메트릭스 "],"VM":["VM"],"NICs":["NIC"],"Loading host information ...":["호스트 정보 로딩 중 ..."],"No puppet activity for this host in the last %s days":["지난 %s 일 동안 이 호스트의 puppet 활동이 없습니다 "],"Loading template information ...":["템플릿 정보 로딩 중 ..."],"Loading VM information ...":["VM 정보 로딩 중 ..."],"Loading NICs information ...":["NIC 정보 로드 중 ..."],"Loading BMC information ...":["BMC 정보 로딩 중 ..."],"Loading runtime information ...":["런타임 정보 로딩 중 ..."],"Resources":["리소스"],"Loading resources information ...":["리소스 정보 로딩 중 ..."],"Review build status for %s":["%s의 빌드 상태 확인 "],"Warning: This will delete this host and all of its data!":["경고: 이 호스트와 호스트의 데이터가 모두 삭제됩니다!"],"This host's stored facts and reports will be deleted too.":["호스트의 저장된 팩트 및 보고서도 삭제됩니다. "],"Please wait while your request is being processed":["요청을 처리하는 동안 잠시 기다려 주십시오."],"The following hosts were updated":["다음 호스트가 업데이트되었습니다 "],"The following parameters were skipped as they did not exists on this host:":["다음의 매개 변수는 호스트에 존재하지 않아 생략되었습니다: "],"Back to host list":["호스트 목록으로 돌아가기 "],"You don't have any visible hosts. Hosts can be added and provisioned from Foreman, or configured to report to Foreman.":["표시 가능한 호스트가 없습니다. Foreman에서 호스트를 추가하거나 프로비저닝할 수 있습니다. 또는 Foreman에 보고하도록 호스트를 구성할 수 있습니다."],"Please note that these HTTP proxy configurations are only used for requests\\n from Foreman or Foreman plugins. System-wide proxies must be configured at operating system level.":[""],"URL of the proxy including schema (https://proxy.example.com:8080)":[""],"Username to use if authentication is required.":[""],"Password to use if authentication is required.":[""],"Test URL":[""],"New HTTP Proxy":[""],"Defining HTTP Proxies that exist on your network allows you to perform various actions through those proxies.":[""],"Image|Name":["이름 "],"Image|Username":["사용자 이름 "],"Image|Uuid":["UUID"],"Image|User Data":[""],"Destroy":["삭제 "],"The user that is used to ssh into the instance, normally cloud-user, ec2-user, ubuntu, root etc":["ssh를 인스턴스에 사용하는 사용자는 일반적으로 cloud-user, ec2-user, ubuntu, root 등 입니다"],"Does this image support user data input (e.g. via cloud-init)?":["이 이미지는 사용자 데이터 입력 (예: cloud-init 통해)을 지원하고 있습니까?"],"(optional) IAM Role for Fog to use when creating this image.":["(옵션) 이미지를 생성할 때 사용할 Fog의 IAM 역할입니다. "],"Password to authenticate with - used for SSH finish step.":["인증에 사용될 암호 - SSH 마지막 단계에서 사용됩니다."],"Image path":["이미지 경로 "],"Full path to backing image used to create new volumes.":["새 볼륨을 생성하는데 사용되는 백업 이미지로의 전체 경로입니다."],"Path to template, relative to datacenter (e.g. My templates/RHEL 6)":["데이터 센터 관련 템플릿으로의 경로 (예: My templates/RHEL 6)"],"SSH keys for: %s":[""],"Download":["다운로드 "],"Recreate":[""],"When using SSH based provisioning, a special SSH key is created in order to automate the provisioning process.":[""],"Normally when setting up a Compute Resource, a key pair (private and public) is created for you automatically.":[""],"However, if it was deleted externally this page helps you to recreate it":[""],"New SSH key":[""],"You are using an unsupported browser.":["지원되지 않는 브라우저를 사용하고 있습니다."],"Login":["로그인 "],"Parameter Details":[""],"Puppet Environments":["Puppet 환경"],"Default Behavior":[""],"Override the default value of the Puppet class parameter.":["Puppet 클래스 매개 변수의 기본값을 덮어씁니다."],"Whether the class parameter value is managed by Foreman.":["클래스 매개 변수 값을 Foreman에서 관리하는지 여부"],"Value to use when there is no match.":["일치하지 않는 경우 사용할 값입니다."],"Omit":[""],"Hidden Value":[""],"Hide all values for this parameter.":["이 매개 변수의 값을 모두 숨깁니다."],"Optional Input Validator":[""],"If ERB is used in a parameter value, the validation of the value will happen during the ENC request. If the value is invalid, the ENC request will fail.":["매개 변수 값에 ERB를 사용하는 경우 ENC 요청 시에 값을 검증합니다. 값이 잘못된 경우 ENC 요청이 실패합니다."],"If checked, will raise an error if there is no default value and no matcher provide a value.":["체크되어 있을 경우 기본값이 없고 matcher가 값을 지정하지 않을 경우 오류가 표시됩니다."],"Prioritize Attribute Order":[""],"Set the order in which values are resolved.":["값을 확인하는 순서를 설정합니다."],"Order":["순서"],"The order in which matchers keys are processed, first match wins.<br> You may use multiple attributes as a matcher key, for example, an order of <code>hostgroup,environment</code> would expect a matcher such as <code>hostgroup,environment = example-group,production</code>":[""],"Continue to look for matches after first find (only array/hash/json/yaml type)? Note: merging overrides ignores all matchers that are omitted.":[""],"Include default value when merging all matching values.":["일치하는 모든 값을 병합할 때 기본값을 포함합니다."],"Avoid duplicate values when merging them (only array type)?":["값을 병합할 때 중복 값을 제외하시겠습니까(배열 유형만)?"],"Specify Matchers":[""],"Remove Matcher":[""],"Attribute type":["속성 유형"],"Matcher is a combination of an attribute and its value, if they match, the value below would be provided.<br> You may use any attribute Foreman knows about, such as facts etc for example: <code> domain = example.com </code> or <code> is_virtual = true</code>.":["일치 조건은 속성과 해당 값의 조합입니다. 일치하는 경우 아래의 값이 제공됩니다.<br> 팩트와 같이 Foreman에 알려진 속성을 모두 사용할 수 있습니다. 예: <code> domain = example.com </code> 또는 <code> is_virtual = true</code>."],"Explain matchers":["매처 (Matcher) 설명 "],"Add Matcher":["일치 조건 추가"],"add a new matcher":["새 일치 조건 추가"],"Medium":["미디어 "],"The path to the medium, can be a URL or a valid NFS server (exclusive of the architecture).\\n for example <em>http://mirror.centos.org/centos/$version/os/$arch</em> where <strong>$arch</strong> will be substituted for the host's actual OS architecture and <strong>$version</strong>, <strong>$major</strong> and <strong>$minor</strong> will be substituted for the version of the operating system. Solaris and Debian media may also use <strong>$release</strong>.":["미디어에 대한 경로로, URL이거나 유효한 NFS 서버일 수 있습니다(아키텍처 제외).\\n 예: <em>http://mirror.centos.org/centos/$version/os/$arch</em> 여기서 <strong>$arch</strong>는 호스트의 실제 OS 아키텍처로 대체되며, <strong>$version</strong>, <strong>$major</strong> 및 <strong>$minor</strong>는 운영 체제의 버전으로 대체됩니다. Solaris 및 Debian 미디어의 경우 <strong>$release</strong>도 사용할 수 있습니다."],"The NFS path to the media.":["미디어로의 NFS 경로입니다. "],"The NFS path to the jumpstart control files.":["jumpstart 제어 파일로의 NFS 경로입니다. "],"The NFS path to the image directory.":["이미지 디렉토리로의 NFS 경로입니다. "],"Choose a family":["제품군 선택 "],"Operating System Family":["운영 체제 제품군 "],"Create Medium":[""],"Medium|Name":["이름 "],"Medium|Path":["경로 "],"Medium|OS Family":[""],"Create Installation Medium":[""],"Installation medium configuration":["설치 미디어 설정 "],"A medium represents the source of one or more operating system's installation files, accessible via the network.\\n It will probably be a mirror from the internet or a copy of one or more CD or DVDs.":["미디어는 네트워크를 통해 액세스되는 하나 이상의 운영 체제 설치 파일의 소스를 나타냅니다.\\n 인터넷의 미러이거나 CD 또는 DVD 하나 이상의 사본인 경우가 많습니다."],"For example, if you have copied several Red Hat release disks into a directory structure where the disk images are named 5.8 or 6.2, and each contained both x86_64 and i386 binaries, then you\\n could create a single medium entry describing them all.\\n The entry, which could be just named 'Red Hat' could contain a path like this <em>'http://server/redhat/$version/$arch'</em>":["예를 들어 여러 개의 Red Hat 릴리즈 디스크를 5.8 또는 6.2라는 이름의 디스크 이미지가 있는 디렉토리 구조에 복사했고 각각에 x86_64 및 i386 바이너리가 모두 포함되어 있는 경우\\n 이러한 모든 이미지를 설명하는 단일 미디어 항목을 생성할 수 있습니다.\\n 이 항목에 'Red Hat'이라는 이름을 지정하여 <em>'http://server/redhat/$version/$arch'</em>와 같은 경로를 포함할 수 있습니다."],"The keywords <b>$version</b>, <b>$major</b> and <b>$minor</b> will be interpolated back into the path specification to calculate the true URL address.":["키워드 <b>$version</b>, <b>$major</b>, <b>$minor</b>는 URL 주소를 계산하기 위해 경로 사양에 다시 삽입합니다."],"You may also associate one or more operating systems with this medium or alternatively set this up later on the %s page.":["하나 이상의 운영 체제를 이 미디어에 연결하거나 이를 %s 페이지에서 나중에 설정할 수 있습니다. "],"Operating systems":["운영 체제 "],"The class of CPU supplied in this machine. This is primarily used by Sparc Solaris builds and can be left blank for other architectures. The value can be determined on Solaris via uname -m":["이 시스템에 제공되는 CPU 클래스입니다. 이는 주로 Sparc Solaris 빌드에 사용되며 다른 아키텍처의 경우 빈 칸으로 둡니다. 값은 uname -m을 사용하여 Solaris에서 확인할 수 있습니다. "],"The class of the machine reported by the Open Boot Prom. This is primarily used by Sparc Solaris builds and can be left blank for other architectures. The value can be determined on Solaris via uname -i|cut -f2 -d,":["Open Boot Prom에서 보고되는 시스템 클래스입니다. 이는 주로 Sparc Solaris 빌드에 사용되며 다른 아키텍처의 경우 빈 칸으로 둡니다. 값은 uname -i|cut -f2 -d를 사용하여 Solaris에서 확인할 수 있습니다. "],"General useful description, for example this kind of hardware needs a special BIOS setup":["이러한 하드웨어 종류에 특정 BIOS 설정이 필요하다와 같은 일반적으로 유용한 설명입니다 "],"Create Model":[""],"Media access control address for this interface. Format must be six groups of two hexadecimal digits <br/> separated by colons (:), e.g. 00:11:22:33:44:55. Most virtualization compute resources (e.g. VMware, oVirt, libvirt) <br/> will provide new random MAC address.":[""],"Device Identifier":[""],"Device identifier for this interface. This may be different on various platforms and environments, here are some common examples.<br/><ul><li>Use the basic name for physical interface identifiers, e.g. <strong>eth0</strong> or <strong>em0</strong> with biosdevname.</li><li>For virtual interfaces, use either alias notation (<strong>eth0:1</strong>, name:index) or VLAN notation (<strong>eth0.15</strong>, name.tag).</li><li>For bonds it's common to use <strong>bond0</strong> on Linux, <strong>lagg0</strong> on FreeBSD systems.</li></ul>":["이 인터페이스의 장치 ID입니다. 이는 다양한 플랫폼 및 환경에서 다를 수 있습니다. 다음은 일반적인 예입니다.<br/><ul><li>biosdevname과 함께 <strong>eth0</strong> 또는 <strong>em0</strong>와 같이 물리적 인터페이스 ID의 기본 이름을 사용합니다.</li><li>가상 인터페이스의 경우 별칭 표기 (<strong>eth0:1</strong>, name:index) 또는 VLAN 표기 (<strong>eth0.15</strong>, name.tag) 중 하나를 사용합니다.</li><li>본딩의 경우 Linux에서는 <strong>bond0</strong>를 사용하고 FreeBSD 시스템에서는 <strong>lagg0</strong>를 사용합니다.</li></ul>"],"DNS Name":[""],"Primary interface's DNS name and domain define host's FQDN":["기본 인터페이스의 DNS 이름 및 도메인으로 호스트의 FQDN이 정의됩니다."],"No domains":["도메인 없음 "],"IPv4 Subnet with associated TFTP smart proxy is required for PXE based provisioning.":[""],"An IP address will be auto-suggested if you have enabled IPAM on the IPv4 subnet selected above.<br/><br/>The IP address can be left blank when:<br/><ul><li>provisioning tokens are enabled</li><li>the domain does not manage DNS</li><li>the subnet does not manage reverse DNS</li><li>and the subnet does not manage DHCP reservations</li></ul>":[""],"IP address auto-suggest":["IP 주소 자동 제시 "],"An IP address will be auto-suggested if you have enabled IPAM on the IPv6 subnet selected above.":[""],"If the Managed flag is enabled, external services such as DHCP, DNS, and TFTP will be configured according to the information provided.":[""],"The services to be configured are determined by the subnet and domain that are selected for this interface. If you want to manage<br/> only a subset of these services, change the %{subnet} and %{domain} proxies configuration. When a proxy is set to 'None', the corresponding":[""],"service configuration will be skipped.":[""],"If the Managed flag is disabled, none of the services will be configured for this interface, even if it is configured for the subnet and domain.":[""],"The Managed flag also determines whether the interface should be configured during host provisioning, so that the configuration remains after reboot.":[""],"The Primary interface is used for constructing the FQDN of the host.":[""],"This interface is also used for network communication during provisioning, e.g. downloading installation packages.":[""],"The Provisioning interface is used for TFTP configuration for PXE boot based on this interface MAC address.":[""],"For image based provisioning using finish template, this interface's IP will be used as the SSH target.":[""],"from profile %s":["%s 프로파일에서"],"Inherits from subnet VLAN ID if not set":["설정되어 있지 않은 경우 서브넷 VLAN에서 상속 "],"Identifier of the interface to which this interface belongs, e.g. eth1":["이 인터페이스가 속한 인터페이스의 ID (예: eth1) "],"The BMC password will be used by Foreman to access the host's BMC controller via a BMC-enabled smart proxy, if available.<br/>":[""],"The password will also be accessible to other users via templates and in the ENC YAML output; disable the bmc_credentials_accessible setting to prevent access.":[""],"The password will not be accessible to other users; enable the bmc_credentials_accessible setting to permit access via templates and in the ENC YAML output.":[""],"BMC password usage":[""],"comma separated interface identifiers":["콤마로 구분된 인터페이스 ID "],"space separated options, e.g. miimon=100":["공백으로 구분된 옵션 (예: miimon=100)"],"Virtual NIC":["가상 NIC"],"Enable if this is an alias or VLAN interface, note that alias can be used only with static boot mode subnet":["별칭 또는 VLAN 인터페이스인 경우 활성화합니다. 별칭은 정적 부팅 모드 서브넷에만 사용할 수 있습니다."],"OS name from facter; e.g. RedHat":["정보에서 OS 이름, 예: RedHat"],"OS major version from facter; e.g. %s":[""],"OS minor version from facter; e.g. %s":[""],"OS friendly name; e.g. RHEL 6.5":["OS 이름; 예: RHEL 6.5"],"Family":["제품군 "],"Root Password Hash":[""],"Hash function to use. Change takes effect for new or updated hosts.":["사용할 해시 함수입니다. 새로운 또는 업데이트된 호스트의 변경 사항이 적용됩니다. "],"It is not possible to assign provisioning templates at this stage.":["이 단계에서는 프로비저닝 템플릿을 할당할 수 없습니다."],"Please save the Operating System first and try again.":["운영 체제를 저장하고 다시 시도하십시오. "],"No templates found!":["템플릿을 찾을 수 없습니다! "],"You probably need to configure your %s first.":["%s을(를) 먼저 구성해야 합니다."],"Clone %s":["%s 복제 "],"Create Operating System":[""],"Operatingsystem|Title":["제목 "],"The Operating systems detail the OSs known to Foreman, and is the central point that the other required components tie into.":[""],"Remove Combination":[""],"Valid Host Groups":[""],"Add Combination":[""],"Association":["연결 "],"Snippet":["조각 모음 "],"Applicable Operating Systems":[""],"Template diff":["템플릿 차이 "],"Create Template":[""],"Build PXE Default":["PXE 기본값 빌드 "],"You are about to change the default PXE menu on all configured TFTP servers - continue?":["구성된 모든 TFTP 서버에 있는 기본 PXE 메뉴가 변경됩니다. 계속하시겠습니까?"],"ProvisioningTemplate|Name":["ProvisioningTemplate|이름"],"Host Group / Environment":[""],"Kind":["종류 "],"ProvisioningTemplate|Snippet":["ProvisioningTemplate|조각 모음"],"ProvisioningTemplate|Locked":["ProvisioningTemplate|잠김"],"This template is locked for editing.":["이 템플릿은 편집 용으로 잠금되어 있습니다. "],"The Provision Templates is the core of Foreman’s flexibility to used for provisioning and installation of operating systems. There are several types of template, along with a flexible matching system to deliver different templates to different hosts or host groups.":[""],"Create Provisioning Template":[""],"Create Partition Table":[""],"Ptable|Name":["이름 "],"Ptable|OS Family":[""],"Ptable|Snippet":["Ptable|조각 모음"],"Ptable|Locked":["Ptable|잠김"],"Partition templates describe the partition layout, with just a different disk layout to account for different server capabilities.":[""],"CA Certificate Expiry Date":[""],"Filter by state:":["상태를 기준으로 필터링:"],"Valid from":["유효 기간 시작 "],"Expires":["만료 "],"Sign":["로그인 "],"Revoke":["취소"],"Realm name, e.g. EXAMPLE.COM":["영역 이름 예: EXAMPLE.COM"],"Realm Type":[""],"Type of realm, e.g. FreeIPA":["영역 유형 (예: FreeIPA) "],"Create Realm":[""],"Realm|Name":["이름 "],"Foreman supports automatically creating realm entries for new hosts. When a realm is selected for a host, Foreman contacts the relevant realm smart proxy to create an entry for the host and retrieve it's one-time registration password.":[""],"Report completed":[""],"The report %{name} that was requested at %{time} has been generated%{compression} and attached to this email.":[""],"compresed":[""],"Generating the report took %s.":[""],"Generate a Report":[""],"Generating a report":[""],"This will generate a report %s. Based on its definition, it can take a long time to process.":[""],"Generate at":[""],"Generate report on a given time.":[""],"Send report via e-mail":[""],"By checking this, the report will be sent to e-mail address specified below. Keep unchecked if you prefer to download the report in your browser.":[""],"Deliver to e-mail addresses":[""],"Valid e-mail addresses delimited by \\\"%s\\\"":[""],"Output format":[""],"If the template supports format selection, user can choose preferred format.<br> Typically the template needs to use report_render macro.<br><br>If usage of this macro is not found in the template,<br>this field is disabled and the output format defaults to plain text.<br><br>If the template supports filter selection, but does not use the report_render macro,<br>in order to enable this field, add a comment to the template mentioning report_render macro name.":[""],"Display advanced fields":["고급 필드 표시"],"Hide advanced fields":["고급 필드 숨기기"],"ReportTemplate|Name":[""],"ReportTemplate|Snippet":[""],"ReportTemplate|Locked":[""],"Download generated report":[""],"The Report Templates provides a way to create textual reports out of Foreman data. When the template is rendered, it loads data from database and renders the result. Based on the template, the output format can be csv, json, yaml or any custom textual format":[""],"Create Report Template":[""],"Changes to organizations and locations will propagate to all inheriting filters":[""],"This role has been cloned from role %s":[""],"When the role's associated %{taxonomies} are changed,<br> the change will propagate to all inheriting filters.\\n Filters that are set to override <br> will remain untouched. Overriding of role filters can be easily disabled by <br> pressing the \\\"Disable overriding\\\" button.\\n Note that not all filters support <br>%{taxonomies}, so these always remain global.":[""],"locations":["위치 "],"Role locations":[""],"organizations":["조직 "],"Role organizations":[""],"Please save the role first. You can edit it later to add filters":["먼저 역할을 저장하십시오. 필터를 추가하기 위해 나중에 편집할 수 있습니다 "],"Loading filters ...":["필터 로드 중 ..."],"New filter":["새 필터 "],"Disable all filters overriding":[""],"Create Role":[""],"Role|Name":["이름 "],"Role|Description":[""],"Role|Locked":[""],"This role is locked for editing.":[""],"Add filter":["필터 추가 "],"Test email":["테스트 이메일"],"Send a test message to the current user's email address to confirm the configuration is working.":[""],"Search error":[""],"Must be unique":[""],"HTTPS endpoint":[""],"Hostname and client certificate must be valid. Ports are typically 8443 or 9090.":[""],"Create Smart Proxy":[""],"SmartProxy|Name":["이름 "],"%s Log Message":[""],"%s error message":[""],"%s warning message":[""],"No Failed Features":[""],"Filter by level:":["레벨을 기준으로 필터링:"],"Time":["시간 "],"Log entry details":["로그 항목 정보"],"Local time":["현지 시간"],"GMT time":["GMT 시간"],"Backtrace":["역추적"],"%s Active Feature":[""],"Failed features: %s":[""],"Create Proxy":[""],"Autosign entries":["자동 서명 항목"],"Hosts managed:":["관리되는 호스트:"],"TFTP server":["TFTP 서버"],"Services":["서비스 "],"Communication status":["통신 상태"],"Active features":["활성 기능"],"Hosts managed":["관리되는 호스트"],"Failed features":["실패한 기능"],"Smart proxies provide a RESTful API to manage subsystems like DNS, DHCP, and TFTP.":[""],"Length":[""],"You can add SSH public keys to a user in Foreman.":[""],"The keys can be used in provisioning templates and are also available for configuration management tools managed by Foreman.":[""],"Add SSH key":[""],"In order to add the SSH key, the user must be saved first. A 'create_ssh_keys' permission is required too.":[""],"Add SSH Key":[""],"Network Address":[""],"Network Prefix":[""],"Prefix length for this subnet, e.g. 24":[""],"Network Mask":[""],"Gateway Address":[""],"Optional: Gateway for this subnet":["옵션: 이 서브넷의 게이트웨이 "],"Primary DNS Server":[""],"Optional: Primary DNS for this subnet":["옵션: 서브넷의 1차 DNS"],"Secondary DNS Server":[""],"Optional: Secondary DNS for this subnet":["옵션: 서브넷의 2차 DNS "],"IPAM":["IPAM"],"You can select one of the IPAM modes supported by the selected IP protocol:<br/><ul><li><strong>DHCP</strong> - will manage the IP on DHCP through assigned DHCP proxy, auto-suggested IPs come from DHCP <em>(IPv4)</em></li><li><strong>Internal DB</strong> - use internal DB to auto-suggest free IP based on other interfaces on same subnet respecting range if specified, useful mainly with static boot mode <em>(IPv4, IPv6)</em>, preserves natural ordering</li><li><strong>Random DB</strong> - same as Internal DB but randomizes results to prevent race conditions <em>(IPv4)</em></li><li><strong>EUI-64</strong> - will assign the IPv6 address based on the MAC address of the interface <em>(IPv6)</em></li><li><strong>External IPAM</strong> - will auto-suggest the next available address via an External IPAM Smart-proxy plugin (IPv4, IPv6)</li><li><strong>None</strong> - leave IP management solely on user, no auto-suggestion <em>(IPv4, IPv6)</em></li></ul>":[""],"IP Address Management":["IP 주소 관리"],"Optional: Starting IP Address for IP auto suggestion":["옵션: IP 자동 제안의 시작 IP 주소 "],"Optional: Ending IP Address for IP auto suggestion":["옵션: IP 자동 제안의 종료 IP 주소 "],"External IPAM Group":[""],"Optional: The group/section of subnets in External IPAM to associate this subnet with":[""],"Optional: VLAN ID for this subnet":["옵션: 서브넷의 VLAN ID"],"Link Delay":[""],"Delay network activity during install for X seconds":[""],"Boot Mode":[""],"Default boot mode for interfaces assigned to this subnet, applied to hosts from provisioning templates":[""],"Proxies":["프록시 "],"The following IPv4 subnets have been found. Please review the details before creating them.":[""],"Create Subnet":[""],"Subnet|Name":["이름 "],"Subnet|Network":["네트워크 "],"Subnet|Vlanid":["Vlanid"],"Foreman can store information about the networking setup of a host that it’s provisioning, which can be used to configure the virtual machine, assign the correct IP addresses and network resources, then configure the OS correctly during the provisioning process.":[""],"Select organizations":["조직 선택 "],"Select locations":["위치 선택 "],"Parent parameters":["부모 매개 변수"],"Location parameters":["위치 매개 변수"],"Organization parameters":["조직 매개 변수"],"Default on login":["기본값 로그인 "],"Edit Properties":["속성 편집"],"Assigning hosts to %{taxonomy_name} will also update %{taxonomy_name} to include all the resources that the selected hosts are currently using.":["호스트를 %{taxonomy_name}에 할당하여 선택한 호스트가 현재 사용하고 있는 모든 리소스를 포함하도록 %{taxonomy_name} 을 업데이트합니다."],"Assign All":["전부 할당"],"Assign the %{count} host with no %{taxonomy_single} to %{taxonomy_name}":["%{taxonomy_single}이 없는 %{count} 호스트를 %{taxonomy_name}에 할당합니다 "],"Manually Assign":["수동 할당 "],"Manually select and assign hosts with no %s":["%s이(가) 없는 호스트를 수동으로 선택 및 할당합니다 "],"Proceed to Edit":["편집 실행 "],"Skip assign hosts and proceed to edit %s settings":["호스트 할당 건너뛰고 %s 설정 편집을 진행합니다 "],"Fix Mismatches":["불일치 수정 "],"Mismatches Report":["불일치 보고서 "],"There is":["다음과 같습니다 "],"%{count} host with no %{taxonomy_single} assigned":["%{taxonomy_single}이(가) 할당되지 않은 %{count} 호스트 "],"Taxonomy|Name":["이름 "],"%{taxonomy_type} %{taxonomy_name} has %{count} host that will need to be reassociated after deletion. Delete %{taxonomy_name2}?":[""],"Select hosts to assign to %s":["%s에 할당할 호스트 선택 "],"Mismatches":["불일치 "],"Fix All Mismatches":["모든 불일치 수정 "],"Location/Organization":["위치/조직 "],"Mismatch Details":["불일치 상세 정보 "],"No hosts are mismatched!":["불일치하는 호스트가 없습니다!"],"All hosts data matches configurations for locations and organizations.":["전체 호스트 데이터는 위치 및 조직의 설정과 일치합니다."],"History":["기록 "],"The template is associated to at least one host in build mode. To apply the change, disable and enable build mode on hosts to update the live templates or choose to %s their configuration from 'Select Action' menu":["이 템플릿은 빌드 모드 상태인 하나 이상의 호스트에 연결되어 있습니다. 변경 사항을 적용하려면 호스트에서 빌드 모드를 비활성화한 후 다시 활성화하여 라이브 템플릿을 업데이트하거나 '작업 선택' 메뉴에서 호스트의 구성을 %s하도록 선택하십시오."],"recreate":["재생성"],"Audit Comment":["감사 코멘트 "],"The Audit Comment field is saved with the template auditing to document the template changes":["감사 코멘트 필드는 템플릿 변경을 문서화하기 위한 템플릿 감사와 함께 저장됩니다 "],"Template inputs":[""],"Inputs can be used to parametrize templates during rendering \\\\\\n based on template type, it allows to fetch the value from host facts, \\\\\\n host parameterization or ask user interactively. To use value loaded \\\\\\n via input, use <code>input('name')</code> global macro. The template needs to be \\\\\\n saved before input macro can load the value. If the value is not available during\\n template preview, its value is expanded to <code>$TYPE_INPUT[name]</code> string.</p>":[""],"Add Input":["입력 추가"],"add a input for this template":["이 템플릿에 대한 입력을 추가합니다."],"Template syntax":[""],"Templates are generated using the Embedded Ruby (ERB) language.":[""],"The following table and example snippet shows global methods, variables and class methods and how to use them.":[""],"These are guaranteed to work via the safe mode rendering, to ensure a template can do nothing harmful.":[""],"To enable safe mode, navigate to Settings page and enable Safemode rendering option.":[""],"For more info visit:":[""],"our templates documentation":[""],"and":["및 "],"DSL (Domain Specific Language) documentation":[""],"Examples":["예제 "],"Comments":["코멘트"],"In-line code syntax":[""],"Printing data":[""],"Variables":["변수 "],"Calling methods on objects":[""],"Safe mode methods":[""],"Global macros":[""],"Iterating":[""],"Once you define a template input in Inputs tab and save the template, it can be used in the ERB.\\n To load value specified through this input, use global macro %{example1} and pass the input\\n name as an argument. E.g. %{example2} will load the value through input called cpus.":[""],"While rendering the template in preview mode, the input either loads the value or uses a placeholder\\n if the input is not ready for the rendering. If the template is rendered for real and the input is\\n not ready, an error is raised. The readyness criteria differs per input type, e.g. for Fact Inputs\\n linked to host's fact with name \\\"cpu_count\\\" is ready when %{example1} facts contains value\\n for such fact. To load this value into the template, following code can be used %{example2}\\n Note that the fact name can differ from input name.":[""],"Safe mode methods and variables":[""],"Class":["클래스 "],"Allowed methods or members":[""],"Global methods (macros)":[""],"Global variables":[""],"No comment provided":[""],"Revert":["되돌리기 "],"No history found":["기록을 찾을 수 없음 "],"Save something and try again":["저장 후 다시 시도하십시오 "],"Host has no provisioning interface defined":["호스트에 프로비저닝 인터페이스가 정의되어 있지 않습니다."],"Host has no IPv4 or IPv6 address defined":[""],"Host has no subnet defined":["호스트에 지정된 서브넷이 없습니다 "],"Host has no domain defined":["호스트에 지정된 도메인이 없습니다 "],"Host bootdisk does not work with static IPv6":[""],"Both IP and Subnet must be set":[""],"At least one of the hosts couldn't be found":[""],"<b>Foreman</b> test email":["<b>Foreman</b> 테스트 이메일"],"This is a test message to confirm that Foreman's email configuration is working.":["Foreman의 이메일 구성이 올바른지를 확인하는 테스트 메시지입니다."],"Your Foreman user account has been created:":["Foreman 사용자 계정이 생성되었습니다: "],"Username":["사용자 이름 "],"Please login to %{foreman_url} to change your password":["%{foreman_url}에 로그인하여 암호를 변경하십시오 "],"External user group":["외부 사용자 그룹 "],"remove external user group":[""],"User Group":[""],"External Groups":["외부 그룹"],"Only internal (non-LDAP) users can be added manually. LDAP users\\n are automatically synced from the External Groups list.":[""],"To refresh the list of users, click on the tab \\\"External\\n groups\\\" then \\\"Refresh\\\".":[""],"Usergroup|Name":["이름 "],"Usergroup|Auth source":["인증 소스 "],"Synchronize group from authentication source":["인증 소스에서 그룹 동기화 "],"Show linked external user groups":["링크된 외부 사용자 그룹 표시 "],"Add external user group":["외부 사용자 그룹 추가 "],"link external user group with this user group":["외부 사용자 그룹이 이 사용자 그룹에 연결되어 있습니다 "],"Create User Group":[""],"Create User group":[""],"With user groups, you can group your users and assign them roles on a group basis.\\n User groups enable users to log into Foreman and be automatically granted permissions.\\n A Foreman user group can be associated to a group stored in an LDAP server, so membership of the LDAP group automatically adds the user to the Foreman user group.":[""],"Mail query":[""],"Email Preferences":["이메일 기본 설정"],"SSH Keys":[""],"Personal Access Tokens":[""],"Language":["언어"],"Authorized by":["승인자 "],"Current password":["현재의 비밀번호"],"Send a test message to the user's email address to confirm the configuration is working.":["사용자의 이메일 주소로 테스트 메시지를 보내 구성이 올바른지 확인합니다."],"Please save the user first before assigning mail notifications.":["메일 알림을 할당하기 전 먼저 사용자를 저장하십시오."],"Notifications can't be assigned to this user.":[""],"Admin rights are currently inherited from a user group":[""],"Roles from user groups":[""],"This group has no roles":[""],"No emails":["이메일이 없음"],"Version %{version}":["버전 %{version}"],"Create User":["사용자 생성"],"User|Login":["로그인 "],"User|Firstname":["이름 "],"User|Lastname":["성 "],"User|Mail":["메일 "],"User|Admin":["관리자 "],"User|Last login on":["마지막 로그인 "],"Are you sure you want to log out?":[""],"Puppet summary":[""],"Welcome":["환영합니다"],"Host built":[""],"Tester":[""],"Puppet error state":[""],"A summary of eventful configuration management reports":[""],"A mail a user receives upon account creation":[""],"A summary of audit changes report <br> Filtered by a query if needed":[""],"A notification when a host finishes building":[""],"A test message to check the email configuration is working":[""],"A notification when a host reports a configuration error":[""],"Unable to create mail notification: %s":[""],"%{subject} has been provisioned successfully":[""],"%{subject} has been deleted successfully":[""],"Community":[""],"RSS post message goes here":[""],"Deprecations":[""],"The %{setting} setting has been deprecated and will be removed in version %{version}":[""],"Support for %{feature} has been deprecated and will be removed in version %{version}":[""],"Report is ready to download":[""],"%{cpus} CPUs and %{memory} memory":["%{cpus} CPU 및 %{memory} 메모리 "],"%{cores} Cores and %{memory} memory":["%{cores} 코어 및 %{memory} 메모리 "],"%{cpus} CPUs and %{memory} MB memory":["%{cpus} CPU 및 %{memory} MB 메모리 "],"Command must be array: %s":[""],"At least one command must be specified":[""],"Absolute command path must be specified: %s":[""],"Command %s not found or unreadable":[""],"Command %s not executable":[""],"Command %{cmd} returned %{status}":[""],"locale_name":["한국어"],"Proxied request failed with: %s\\n%s":[""],"Metric already registered: %s":[""],"Could not find %{migration_name} migration in %{destination}":[""],"IPv4 DNS record":[""],"IPv6 DNS record":[""],"Reverse IPv4 DNS record":[""],"Reverse IPv6 DNS record":[""],"hostname can contain only lowercase letters, numbers, dashes and dots according to RFC921, RFC952 and RFC1123":[""],"No free ports available for websockify, try again later":["websockify에 사용할 수 있는 포트가 없습니다. 나중에 다시 시도하십시오."],"New connection has been rejected with reason: %":[""],"New connection has been rejected":[""],"Disconnected":[""],"Connected":[""],"The connection was closed by the browser. please verify that the certificate authority is valid":[""],"Loading...":["로딩..."],"Error loading scheduler hint filters information: %s":[""],"Remove widget":[""],"Are you sure you want to delete this widget from your dashboard?":["이 위젯을 대시보드에서 삭제하시겠습니까?"],"Widget removed from dashboard.":["위젯이 대시보드에서 삭제되었습니다."],"Error removing widget from dashboard.":["대시보드에서 위젯을 삭제하는 도중 오류가 발생했습니다."],"Widget added to dashboard.":["위젯이 대시보드에 추가되었습니다."],"Error adding widget to dashboard.":["위젯을 대시보드에 추가하는 도중 오류가 발생했습니다."],"Widget positions successfully saved.":["위젯 위치를 저장했습니다."],"Failed to save widget positions.":["위젯 위치를 저장하지 못했습니다."],"There was an error listing VMs: %(status)s %(statusText)s":["VM을 나열하는 도중 오류가 발생했습니다: %(status)s %(statusText)s"],"Test connection was successful":["연결 테스트 성공"],"An error occurred while testing the connection: ":[""],"Revert template":[""],"Are you sure you would like to revert the Template?":[""],"Revert Failed, ${err}":[""],"Confirm":["확인"],"Filter...":["필터..."],"No data available in table":[""],"Showing %s to %s of %s entries":[""],"Showing 0 to 0 of 0 entries":[""],"(filtered from %s total entries)":[""],"Show %s entries":[""],"Processing...":[""],"Search:":[""],"No matching records found":[""],"First":[""],"Last":[""],"Next":["다음"],"Previous":[""],": activate to sort column ascending":[""],": activate to sort column descending":[""],"Please select hosts to perform action on.":[""],"Single host is selected in total":[""],"Undo selection":[""],"Before you proceed to using Foreman you should provide information about one or more architectures.":["Foreman을 사용하기 전 하나 이상의 아키텍처에 대한 정보를 지정해야 합니다. "],"Each entry represents a particular hardware architecture, most commonly {x86_64} or {i386}. Foreman also supports the Solaris operating system family, which includes {sparc} based systems.":[""],"Each architecture can also be associated with more than one operating system and a selector block is provided to allow you to select valid combinations.":["각 아키텍처는 하나 이상의 운영 체제에 연결할 수 있고 유효한 조합을 선택할 수 있도록 선택자 블록이 제공됩니다."],"Request UUID":[""],"HTTP request UUID, clicking will filter audits for this request. It can also be used for searching in application logs.":[""],"Affected Organizations":[""],"Affected Locations":[""],"Filter audits for this user only":[""],"Logged-in":["로그인했습니다 "],"Filter audits for this resource only":[""],"Foreman can use LDAP based service for user information and authentication.":["Foreman은 사용자 정보 및 인증을 위해 LDAP 기반 서비스를 사용할 수 있습니다. "],"The authentication process currently requires an LDAP provider, such as {FreeIPA}, {OpenLDAP} or {Microsoft}.":[""],"Learn more about LDAP authentication in the documentation.":[""],"Foreman can use External service for user information and authentication.":[""],"Learn more about External authentication in the documentation.":[""],"Create LDAP Authentication Source":[""],"Clear":[""],"Press ' / ' to focus on search":[""],"name already exists":[""],"Bookmark was successfully created.":["북마크가 성공적으로 생성되었습니다. "],"Query":[""],"Create Bookmark":[""],"No data available":[""],"Report Metrics":["보고서 메트릭스 "],"Total":["합계 "],"You don't seem to have any reports.":["보고서가 없습니다."],"If you wish to configure Puppet to forward its reports to Foreman, please follow {settingUpPuppetReports} and {emailReporting}":[""],"setting up reporting":["보고서 설정 중 "],"e-mail reporting":["이메일 보고서 "],"split":[""],"unified":[""],"Error during rendering, Return to Editor tab.":[""],"Host Fetch ${response}":[""],"Filter Host...":[""],"Editor":[""],"Changes":[""],"Preview":["미리 보기 "],"Select Host...":[""],"Preview is outdated.":[""],"Hide Content":[""],"Revert Local Changes":[""],"Import File":[""],"Maximize":[""],"Safemode":[""],"Syntax":[""],"Keybind":[""],"Theme":[""],"Autocompletion":[""],"Live Autocompletion":[""],"Click to log in again":[""],"Request Failed":[""],"Show distribution chart":["배포 차트 표시 "],"View Chart":[""],"Fact distribution chart - %s ":[""],"(%s host)":[""],"Failed to submit the request.":[""],"Review before build":[""],"Build enables host {hostName} to rebuild on next boot":[""],"This action will delete this host and all its data (i.e facts, report)":[""],"No errors detected":[""],"Host %s has been removed successfully":[""],"This will delete the VM and its disks. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"VM and its disks will not be deleted. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Delete host?":[""],"Delete host":[""],"Are you sure you want to delete host {host}? This action is irreversible. {cascade}":[""],"Host %s will be built next boot":[""],"Legacy UI":[""],"Recent audits":[""],"All audits":[""],"No Results found":[""],"Not available":[""],"Power Status":[""],"This will change the host power status, are you sure?":[""],"an error occurred: %s":[""],"Power has been set to \\\"%s\\\" successfully":[""],"Reboot":["다시 시작"],"Reset":[""],"IPv6 address":[""],"IPv4 address":[""],"MAC address":["MAC 주소"],"No host found":[""],"The host %s does not exist or there are access permissions needed. Please contact your administrator if this issue continues.":[""],"All hosts":["전체 호스트 "],"Recent communication":[""],"Host status":[""],"Manage all statuses":[""],"OK statuses":[""],"Warning statuses":[""],"Error statuses":[""],"N/A statuses":[""],"No statuses to show":[""],"All statuses OK":[""],"Clear host status":[""],"You are about to clear the %s status. Are you sure?":[""],"Manage host statuses":[""],"System properties":[""],"Copy to clipboard":[""],"Copied to clipboard":[""],"BIOS UUID":[""],"Owner type":[""],"Expand/Collapse all":[""],"No results found":[""],"Something went wrong":[""],"Loading":["로딩 중 "],"Delete report?":[""],"Delete report":[""],"Report was successfully deleted":[""],"There was some issue deleting the report: ${error}":[""],"Are you sure you want to delete this report? This action is irreversible.":[""],"Created %s by %s":[""],"(updated %s)":[""],"Owned":[""],"Total: %s":[""],"Owned: %s":[""],"Host Status Overview":[""],"Any Organization":["모든 조직 "],"Any Location":["모든 위치 "],"You are impersonating another user, click to stop the impersonation":[""],"Confirm Action":[""],"You are about to stop impersonating other user. Are you sure?":[""],"Any organization":[""],"Any location":[""],"Manage Organizations":["조직 관리 "],"Manage Locations":["위치 관리 "],"Log in to your account":[""],"Password":["암호 "],"Log In":["로그인"],"Specified value is higher than maximum value %s":[""],"Specified value is higher than recommended maximum %s":[""],"Vendor class":["벤더 클래스 "],"Hardware model":[""],"Bookmark this search":["이 검색을 북마크 "],"Saved Bookmarks":[""],"Manage Bookmarks":["북마크 관리 "],"None provided":[""],"Create new":[""],"items":[""],"Items per page":[""],"per page":[""],"Go to first page":[""],"Go to previous page":[""],"Go to last page":[""],"Go to next page":[""],"Current page":[""],"Pagination":[""],"Weak":["취약함"],"Too short":[""],"Normal":["적절함"],"Strong":["강력함"],"Very strong":[""],"Verify":["확인 "],"Passwords do not match":[""],"Update value for %s setting":[""],"Setting updated.":[""],"Error updating setting":[""],"This setting is encrypted. Empty input field is displayed instead of the setting value.":[""],"Not set":[""],"Empty":[""],"This setting is defined in the configuration file %s and is read-only.":[""],"Default: %s":[""],"Copied!":[""],"Today":[""],"For more information please see ":[""],"documentation":[""],"There was a problem processing the request. Please try again.":[""],"To report an issue {clickHere}":[""],"click here":[""],"Return to last page":[""],"${progress}%% Complete":[""],"filter...":[""],"Specified value is higher than maximum value":[""],"Specified value is higher than recommended maximum":[""],"Error! ":[""],"Warning! ":[""],"Form was successfully created.":[""],"is too long (maximum is %s characters)":[""],"Select row":[""],"Disk name":[""],"Storage Pod":[""],"Data store":["데이터 저장소 "],"Disk Mode":[""],"Thin provision":["씬 프로비저닝"],"Eager zero":["사전 제로화"],"%(name)s (free: %(free)s, prov: %(prov)s, total: %(total)s)":[""],"Create SCSI controller":[""],"Add volume":[""],"Delete Controller":[""],"Add Controller":[""],"Your New Personal Access Token":[""],"Make sure to copy your new personal access token now. You won’t be able to see it again!":[""],"Cannot be in the past":[""],"Personal Access Token was successfully created.":[""],"Add Personal Access Token":[""],"Create Personal Access Token":[""],"Revoke personal access token":[""],"Do you really want to revoke Access Token?":[""],"Active Personal Access Tokens":[""],"Inactive Personal Access Tokens":[""],"Personal Access Tokens allow you to authenticate API requests without using your password, e.g. ":[""],"Token was successfully revoked.":[""],"Could not revoke Token: ":[""],"Revoked":[""],"Never":["사용 안 함"],"Expired":[""],"Last Used":[""],"Error submitting data:":[""],"Oh no! Something went wrong while submitting the form, the server returned the following error: %s":[""],"Hard disk":[""]," Documentation":[""],"Hardware models":["하드웨어 모델 "],"Confirm Hardware Model Deletion":[""],"Hardware Model %s was successfully deleted":[""],"You are about to delete %s. Are you sure?":[""],"Nothing to select.":[""],"Initial configuration template":[""],"does not have assigned host_init_config template":[""],"No OS from host group":[""],"Generating ...":[""],"There was an error while generating the command, see the logs for more information.":[""],"Registration command":[""],"yes":["예"],"no":["no"],"Inherit from host parameter":[""],"Yes (override)":[""],"No (override)":[""],"Setup REX":[""],"Setup remote execution. If set to `Yes`, SSH keys will be installed on the registered host. The inherited value is based on the `host_registration_remote_execution` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level.":[""],"Setup Insights":[""],"If set to `Yes`, Insights client will be installed and registered on Red Hat family operating systems. It has no effect on other OS families that do not support it. The inherited value is based on the `host_registration_insights` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level.":[""],"Insecure":[""],"If the target machine does not trust the host SSL certificate, the initial connection could be subject to a man-in-the-middle attack. If you accept the risk and do not require the server authenticity to be verified, you can enable insecure argument for the initial curl. Note that all subsequent communication is then properly secured, because the initial request deploys the SSL certificate for the rest of the registration process.":[""],"Required for registration without subscription manager. Can be specified by host group.":[""],"Install packages":[""],"Packages to install on the host when registered. Can be set by `host_packages` parameter, example: `pkg1 pkg2`.":[""],"Repository":["리포지터리 "],"A repository to be added before the registration is performed. It can be useful to e.g. make the subscription-manager packages available for the purpose of the registration. For Red Hat family distributions, this should be the URL of the repository, e.g. 'http://rpm.example.com/'. For Debian OS families, it's the whole list file content, e.g. 'deb http://deb.example.com/ buster 1.0'.":[""],"Repository GPG key URL":[""],"If packages are GPG signed, the public key can be specified here to verify the packages signatures. It needs to be specified in the ascii form with the GPG public key header.":[""],"Smart proxy":["스마트 프록시 "],"Only smart proxies with enabled `Templates` and `Registration` features are displayed.":[""],"If no organization is set, the default organization of the user is assumed.":[""],"Not specified":[""],"If no location is set, the default location of the user is assumed.":[""],"Token life time":[""],"Expiration of the authorization token.":[""],"hours":[""],"unlimited":[""],"Update packages":[""],"Advanced":[""],"There was an error while loading the data, see the logs for more information.":[""],"Return to the last page":[""],"Resource not found":[""],"Something went wrong and the resource does not exist or there are access permissions needed. Please, contact your administrator if this issue continues":[""],"No Results":[""],"must set host and port":["호스트 및 포트를 설정해야 합니다 "],"Connected to: %s":[""],"No documentation found":["문서를 찾을 수 없음"],"We have not found any documentation for your API.":["귀하의 API에 대한 문서를 찾을 수 없습니다. "],"Follow %{href} on how to describe your controllers.":["컨트롤러 설명 방법은 %{href}을(를) 따르십시오. "],"further instructions":["추가 지침 "],"Oops!!":["죄송합니다!"],"Resource %{res} not found.":["리소스 %{res}을(를) 찾을 수 없습니다."],"Method %{method} not found for resource %{resource}.":["리소스 %{resource}의 방식 %{method}을(를) 찾을 수 없습니다. "],"Try going to %{href}":["%{href}로 전환 시도 "],"%{app_name} API documentation homepage":["%{app_name} API 문서 홈페이지 "],"required":["필수 "],"optional":["옵션"],"nil allowed":["nil이 허용됩니다 "],"Param name":["매개 변수 이름 "],"Params":["매개 변수 "],"Metadata":["메타 데이터"],"Errors":["오류"],"Supported Formats":["지원되는 형식 "],"Please enable JavaScript to view the %{comments_href}.":["%{comments_href}을(를) 표시하기 위해 JavaScript를 활성화하십시오. "],"comments powered by %{disqus}":["%{disqus}에서 제공하는 코멘트 "],"API documentation":["API 문서 "],"Audited::Audit|Action":[""],"Audited::Audit|Associated name":[""],"Audited::Audit|Associated type":[""],"Audited::Audit|Auditable name":[""],"Audited::Audit|Auditable type":[""],"Audited::Audit|Audited changes":[""],"Audited::Audit|Comment":[""],"Audited::Audit|Remote address":[""],"Audited::Audit|Request uuid":[""],"Audited::Audit|User type":[""],"Audited::Audit|Username":[""],"Audited::Audit|Version":[""],"Auth source":["인증 소스 "],"AuthSource|Account":["계정 "],"AuthSource|Account password":["계정 암호 "],"AuthSource|Attr firstname":["속성 이름 "],"AuthSource|Attr lastname":["속성 성 "],"AuthSource|Attr login":["속성 로그인 "],"AuthSource|Attr mail":["속성 메일 "],"AuthSource|Attr photo":["속성 사진 "],"AuthSource|Base dn":["기본 DN"],"AuthSource|Groups base":["그룹 기반 "],"AuthSource|Ldap filter":["LDAP 필터 "],"AuthSource|Port":["포트 "],"AuthSource|Server type":["서버 유형 "],"AuthSource|Tls":["TLS"],"AuthSource|Use netgroups":[""],"AuthSource|Usergroup sync":[""],"Bookmark":["북마크 "],"Bookmark|Owner type":["소유자 유형 "],"Compute attribute":["컴퓨터 속성 "],"ComputeAttribute|Name":["이름 "],"ComputeAttribute|Vm attrs":["Vm 속성 "],"ComputeProfile|Name":["이름 "],"ComputeResource|Attrs":["속성 "],"ComputeResource|Caching enabled":[""],"ComputeResource|Description":["설명 "],"ComputeResource|Domain":[""],"ComputeResource|Password":["암호 "],"ComputeResource|Url":["URL"],"ComputeResource|User":["사용자 "],"ComputeResource|Uuid":["UUID"],"Domain|Name":["이름 "],"External usergroup":["외부 사용자 그룹 "],"ExternalUsergroup|Name":["이름 "],"Fact name":["정보 이름 "],"FactName|Ancestry":["상위 "],"FactName|Compose":["작성 "],"FactName|Name":["이름 "],"FactName|Short name":["약어 "],"Feature":["기능 "],"Feature|Name":["이름 "],"Filter|Taxonomy search":["분류 검색 "],"Foreman internal":[""],"ForemanInternal|Key":[""],"ForemanInternal|Value":[""],"Foreman register/registration facet":[""],"ForemanRegister::RegistrationFacet|Jwt secret":[""],"Host::Base|Build":["빌드 "],"Host::Base|Build errors":[""],"Host::Base|Certname":["인증서 이름 "],"Host::Base|Comment":["코멘트 "],"Host::Base|Disk":["디스크 "],"Host::Base|Enabled":["활성화됨 "],"Host::Base|Global status":[""],"Host::Base|Grub pass":["Grub 경로 "],"Host::Base|Image file":["이미지 파일 "],"Host::Base|Initiated at":[""],"Host::Base|Installed at":["설치 "],"Host::Base|Last compile":["마지막 컴파일 "],"Host::Base|Last report":["마지막 보고서 "],"Host::Base|Lookup value matcher":[""],"Host::Base|Managed":["관리 "],"Host::Base|Name":["이름 "],"Host::Base|Otp":["OTP"],"Host::Base|Owner type":["소유자 유형 "],"Host::Base|Provision method":["프로비저닝 방식 "],"Host::Base|Pxe loader":[""],"Host::Base|Root pass":["Root 경로 "],"Host::Base|Use image":["이미지 사용 "],"Host::Base|Uuid":["UUID"],"Host facets/base":[""],"HostFacets::Base|Boot time":[""],"HostFacets::Base|Cores":[""],"HostFacets::Base|Disks total":[""],"HostFacets::Base|Foreman instance":[""],"HostFacets::Base|Ram":[""],"HostFacets::Base|Sockets":[""],"HostFacets::Base|Virtual":[""],"Host status/status":[""],"HostStatus::Status|Reported at":[""],"HostStatus::Status|Status":[""],"Hostgroup|Ancestry":["상위 "],"Hostgroup|Description":[""],"Hostgroup|Grub pass":["Grub 경로 "],"Hostgroup|Image file":["이미지 파일 "],"Hostgroup|Lookup value matcher":[""],"Hostgroup|Pxe loader":[""],"Hostgroup|Root pass":["Root 경로 "],"Hostgroup|Title":["제목 "],"Hostgroup|Use image":["이미지 사용 "],"Hostgroup|Vm defaults":["Vm 기본값 "],"Http proxy":[""],"HttpProxy|Name":[""],"HttpProxy|Password":[""],"HttpProxy|Url":[""],"HttpProxy|Username":[""],"Image|Iam role":["Iam 역할 "],"Image|Password":["암호 "],"Image|User data":["사용자 데이터 "],"Jwt secret":[""],"JwtSecret|Token":[""],"Key pair":["키 쌍 "],"KeyPair|Name":["이름 "],"KeyPair|Public":["공개 "],"KeyPair|Secret":["비공개 "],"Lookup key":["검색 키 "],"LookupKey|Avoid duplicates":[""],"LookupKey|Description":["설명 "],"LookupKey|Hidden value":[""],"LookupKey|Key":["키 "],"LookupKey|Key type":["키 유형 "],"LookupKey|Lookup values count":["검색 값 수 "],"LookupKey|Merge default":[""],"LookupKey|Merge overrides":[""],"LookupKey|Omit":[""],"LookupKey|Override":["덮어쓰기 "],"LookupKey|Path":["경로 "],"LookupKey|Required":["필수 사항 "],"LookupKey|Validator rule":["검사기 규칙 "],"LookupKey|Validator type":["검사기 유형 "],"Lookup value":["검색 값 "],"LookupValue|Match":["일치 "],"LookupValue|Omit":[""],"LookupValue|Value":["값 "],"Mail notification":[""],"MailNotification|Default interval":[""],"MailNotification|Description":[""],"MailNotification|Mailer":[""],"MailNotification|Method":[""],"MailNotification|Name":[""],"MailNotification|Queryable":[""],"MailNotification|Subscriptable":[""],"MailNotification|Subscription type":[""],"Medium|Config path":["설정 경로 "],"Medium|Image path":["이미지 경로 "],"Medium|Media path":["미디어 경로 "],"Medium|Os family":["Os 제품군 "],"Message|Value":["값 "],"Model|Hardware model":["하드웨어 모델 "],"Model|Info":["정보 "],"Model|Name":["이름 "],"Model|Vendor class":["벤더 클래스 "],"Nic::Base|Attached devices":["할당된 장치 "],"Nic::Base|Attached to":["할당 대상 "],"Nic::Base|Attrs":["속성 "],"Nic::Base|Bond options":["본드 옵션 "],"Nic::Base|Compute attributes":[""],"Nic::Base|Identifier":["식별자 "],"Nic::Base|Ip":["IP"],"Nic::Base|Ip6":[""],"Nic::Base|Link":["링크 "],"Nic::Base|Mac":["MAC"],"Nic::Base|Managed":["관리"],"Nic::Base|Mode":["모드 "],"Nic::Base|Name":["이름 "],"Nic::Base|Password":["암호 "],"Nic::Base|Primary":[""],"Nic::Base|Provider":["공급자 "],"Nic::Base|Provision":[""],"Nic::Base|Tag":["태그"],"Nic::Base|Username":["사용자 이름"],"Nic::Base|Virtual":["가상 "],"Notification":[""],"Notification|Actions":[""],"Notification|Audience":[""],"Notification|Expired at":[""],"Notification|Message":[""],"Notification|Subject type":[""],"Notification blueprint":[""],"NotificationBlueprint|Actions":[""],"NotificationBlueprint|Expires in":[""],"NotificationBlueprint|Group":[""],"NotificationBlueprint|Level":[""],"NotificationBlueprint|Message":[""],"NotificationBlueprint|Name":[""],"Notification recipient":[""],"NotificationRecipient|Seen":[""],"Operatingsystem":["운영 체제 "],"Operatingsystem|Description":["설명 "],"Operatingsystem|Major":["메이저 "],"Operatingsystem|Minor":["마이너 "],"Operatingsystem|Name":["이름 "],"Operatingsystem|Nameindicator":["이름 표시기 "],"Operatingsystem|Password hash":["암호 해시 "],"Operatingsystem|Release name":["릴리즈 이름 "],"Parameter":["매개 변수 "],"Parameter|Hidden value":["숨겨진 값 "],"Parameter|Key type":[""],"Parameter|Priority":["우선 순위 "],"Parameter|Searchable value":[""],"Permission|Name":["이름 "],"Permission|Resource type":["리소스 유형 "],"Personal access token":[""],"PersonalAccessToken|Expires at":[""],"PersonalAccessToken|Last used at":[""],"PersonalAccessToken|Name":[""],"PersonalAccessToken|Revoked":[""],"PersonalAccessToken|Token":[""],"Realm|Realm type":["영역 유형 "],"Report":["보고서 "],"Report|Metrics":["메트릭스 "],"Report|Origin":[""],"Report|Reported at":["보고 "],"Report|Status":["상태 "],"Role|Builtin":["내장됨 "],"Role|Origin":[""],"Setting":["설정 "],"Setting|Category":["카테고리 "],"Setting|Default":["기본값 "],"Setting|Description":["설명 "],"Setting|Encrypted":[""],"Setting|Full name":[""],"Setting|Name":["이름 "],"Setting|Settings type":["설정 유형 "],"Setting|Value":["값 "],"SmartProxy|Expired logs":[""],"SmartProxy|Url":["Url"],"Smart proxy feature":[""],"SmartProxyFeature|Capabilities":[""],"SmartProxyFeature|Settings":[""],"Source":["소스 "],"Source|Value":["값 "],"Ssh key":[""],"SshKey|Fingerprint":[""],"SshKey|Key":[""],"SshKey|Length":[""],"SshKey|Name":[""],"Stored value":[""],"StoredValue|Expire at":[""],"StoredValue|Key":[""],"StoredValue|Value":[""],"Subnet|Boot mode":["부트 모드 "],"Subnet|Description":[""],"Subnet|Dns primary":["1차 DNS "],"Subnet|Dns secondary":["2차 DNS"],"Subnet|Externalipam group":[""],"Subnet|From":["시작 "],"Subnet|Gateway":["게이트웨이 "],"Subnet|Ipam":["Ipam"],"Subnet|Mask":["마스크 "],"Subnet|Mtu":[""],"Subnet|Nic delay":[""],"Subnet|Priority":["우선 순위 "],"Subnet|To":["종료 "],"Table preference":[""],"TablePreference|Columns":[""],"TablePreference|Name":[""],"Taxable taxonomy":["분류 텍소노미 "],"TaxableTaxonomy|Taxable type":["분류 유형 "],"Taxonomy":["텍소노미 "],"Taxonomy|Ancestry":["상위 "],"Taxonomy|Description":[""],"Taxonomy|Ignore types":["유형 무시 "],"Taxonomy|Title":["제목 "],"Template|Default":[""],"Template|Description":[""],"Template|Locked":[""],"Template|Name":[""],"Template|Os family":[""],"Template|Snippet":[""],"Template|Template":[""],"Template|Vendor":[""],"TemplateInput|Advanced":[""],"TemplateInput|Default":[""],"TemplateInput|Description":[""],"TemplateInput|Fact name":[""],"TemplateInput|Hidden value":[""],"TemplateInput|Input type":[""],"TemplateInput|Name":[""],"TemplateInput|Options":[""],"TemplateInput|Puppet class name":[""],"TemplateInput|Puppet parameter name":[""],"TemplateInput|Required":[""],"TemplateInput|Resource type":[""],"TemplateInput|Value type":[""],"TemplateInput|Variable name":[""],"Template kind":["템플릿 유형 "],"TemplateKind|Description":[""],"TemplateKind|Name":["이름 "],"Token|Expires":["만료 "],"Token|Value":["값 "],"Upgrade task":[""],"UpgradeTask|Always run":[""],"UpgradeTask|Last run time":[""],"UpgradeTask|Long running":[""],"UpgradeTask|Name":[""],"UpgradeTask|Ordering":[""],"UpgradeTask|Skip failure":[""],"UpgradeTask|Subject":[""],"UpgradeTask|Task name":[""],"User|Avatar hash":["아바타 해시 "],"User|Description":[""],"User|Disabled":[""],"User|Locale":["로케일 "],"User|Lower login":["Lower 로그인 "],"User|Mail enabled":["메일 활성화 "],"User|Password hash":["암호 해시 "],"User|Password salt":["암호 salt"],"User|Timezone":[""],"User mail notification":[""],"UserMailNotification|Interval":[""],"UserMailNotification|Last sent":[""],"UserMailNotification|Mail query":[""],"User role":["사용자 역할 "],"UserRole|Owner type":["소유자 유형 "],"Usergroup":["사용자 그룹 "],"Usergroup|Admin":["관리자 "],"Usergroup member":["사용자 그룹 멤버 "],"UsergroupMember|Member type":["멤버 유형 "],"Widget":[""],"Widget|Col":[""],"Widget|Data":[""],"Widget|Name":[""],"Widget|Row":[""],"Widget|Sizex":[""],"Widget|Sizey":[""],"Widget|Template":[""]}}};
var locales = locales || {}; locales['ko'] = {"domain":"app","locale_data":{"app":{"":{"Project-Id-Version":"Foreman","Report-Msgid-Bugs-To":"","POT-Creation-Date":"2022-11-04 11:48+0000","PO-Revision-Date":"2013-04-24 11:26+0000","Last-Translator":"DaeHyung Lee <daehyung@gmail.com>, 2015","Language-Team":"Korean (http://www.transifex.com/foreman/foreman/language/ko/)","MIME-Version":"1.0","Content-Type":"text/plain; charset=UTF-8","Content-Transfer-Encoding":"8bit","Language":"ko","Plural-Forms":"nplurals=1; plural=0;","lang":"ko","domain":"app","plural_forms":"nplurals=1; plural=0;"},"Failed to fetch: ":["가져오는데 실패했습니다: "],"Sorry but no templates were configured.":["죄송합니다. 설정된 템플릿이 없습니다. "],"Success":["성공 "],"Warning":["경고 "],"Error":["오류 "],"Unknown power state":[""],"Exit Full Screen":["전체 화면에서 나가기 "],"No matches found":[""],"physical @ NAT %s":["물리 @ NAT %s"],"physical @ bridge %s":["물리 @ 브리지 %s"],"Loading interfaces information ...":["인터페이스 정보 로드 중..."],"Error loading interfaces information: %s":["인터페이스 정보 로드 오류: %s"],"Loading virtual machine information ...":["가상 머신 정보 로딩 중 ..."],"Loading parameters...":["매개 변수 로딩 중..."],"No subnets":["서브넷이 없음 "],"Error generating IP: %s":["IP 생성 오류: %s"],"Warning: This combination of loader and OS might not be able to boot.":[""],"Manual configuration is needed.":[""],"Interface":["인터페이스"],"Primary":["기본 "],"Provisioning":["프로비저닝"],"Managed":["관리됨 "],"Some other interface is already set as primary. Are you sure you want to use this one instead?":["이미 다른 인터페이스가 기본 인터페이스로 설정되어 있습니다. 이 인터페이스를 대신 사용하시겠습니까?"],"Some other interface is already set as provisioning. Are you sure you want to use this one instead?":["이미 다른 인터페이스가 프로비저닝 인터페이스로 설정되어 있습니다. 이 인터페이스를 대신 사용하시겠습니까?"],"virtual attached to %s":["%s에 연결된 가상 머신"],"virtual":["가상"],"physical":["물리"],"Create Host":[""],"Build":["빌드 "],"Reboot and build":["다시 시작 및 빌드 "],"Select All":["모두 선택 "],"All items":["전체 항목 "],"Filter":["필터 "],"Selected items":["선택한 항목 "],"Deselect All":["모든 선택 해제 "],"Select this since it belongs to a host":["호스트에 속해 있으므로 이를 선택합니다 "],"This is used by a host":["이는 호스트에 의해 사용됩니다 "],"This is inherited from parent":["이는 부모로 부터 상속됩니다"],"Parent is already selected":["부모가 이미 선택되어 있습니다 "],"Active":["활성화"],"pending":["보류 중 "],"valid":["유효함"],"can't be blank":["빈 칸으로 두지 마십시오. "],"is invalid":["유효하지 않음 "],"Internal Server Error: the server was unable to finish the request. ":[""],"This may be caused by unavailability of some required service, incorrect API call or a server-side bug. ":[""],"There may be more information in the server's logs.":[""],"User account is disabled, please contact your administrator":[""],"Admin permissions required":["관리 권한이 필요합니다 "],"%{resource_name} not found by id '%{id}'":["%{resource_name}을 ID '%{id}'로 찾을 수 없습니다 "],"Missing one of the required permissions: %s":["필요한 권한 중 하나가 없습니다: %s"],"unknown permission for %s":["%s에 대해 알 수 없는 권한 "],"unknown parent permission for %s":["%s에 대해 알 수 없는 부모 권한"],"List all architectures":["모든 아키텍처 목록 나열 "],"List all architectures for operating system":["운영 체제의 모든 아키텍처 목록 나열 "],"ID of operating system":["운영 체제 ID "],"Show an architecture":["아키텍처 표시"],"Operating system IDs":["운영 체제 ID "],"Create an architecture":["아키텍처 생성 "],"Update an architecture":["아키텍처 업데이트 "],"Delete an architecture":["아키텍처 삭제"],"List all audits":["모든 감사를 나열 "],"List all audits for a given host":["지정된 호스트의 모든 감사를 나열 "],"Show an audit":["감사 보기 "],"List external authentication sources":[""],"List external authentication sources per location":[""],"List external authentication sources per organization":[""],"Show an external authentication source":[""],"Update an external authentication source":[""],"List internal authentication sources":[""],"Show an internal authentication source":[""],"List all LDAP authentication sources":["모든 LDAP 인증 소스 나열 "],"List LDAP authentication sources per location":[""],"List LDAP authentication sources per organization":[""],"Show an LDAP authentication source":["LDAP 인증 소스 표시"],"The hostname of the LDAP server":[""],"defaults to 389":["389로 기본 설정 "],"required if onthefly_register is true":["onthefly_register가 Ture인 경우 필요합니다 "],"sync external user groups on login":["로그인 시에 외부 사용자 그룹 동기화"],"groups base DN":["그룹 기본 DN"],"use NIS netgroups instead of posix groups, applicable only when server_type is posix or free_ipa":[""],"type of the LDAP server":["LDAP 서버 유형"],"LDAP filter":["LDAP 필터 "],"Create an LDAP authentication source":["LDAP 인증 소스 생성 "],"Update an LDAP authentication source":["LDAP 인증 소스 업데이트 "],"Test LDAP connection":["LDAP 연결 테스트"],"Delete an LDAP authentication source":["LDAP 인증 소스 삭제 "],"List all authentication sources":[""],"List all authentication sources per location":[""],"List all authentication sources per organization":[""],"List all autosign entries":["모든 자동 서명 항목 나열 "],"Create autosign entry":[""],"Autosign entry name":[""],"Delete autosign entry":[""],"Foreman API v2 is currently the default API version.":["Foreman API v2가 현재 기본 API 버전입니다."],"Set the current location context for the request":[""],"Set the current organization context for the request":[""],"Page number, starting at 1":["1 부터 페이지 번호 "],"Number of results per page to return, 'all' to return all results":[""],"filter results":["필터 결과 "],"Sort and order by a searchable field, e.g. '<field> DESC'":[""],"REPLACE locations with given ids":["지정된 ID로 위치를 변경합니다 "],"REPLACE organizations with given ids.":["지정된 ID로 조직을 변경합니다 "],"Scope by locations":["위치 별 범위 "],"Scope by organizations":["조직 별 범위 "],"use if you want update locked templates":[""],"determines when the template should associate objects based on metadata, new means only when new template is being created, always means both for new and existing template which is only being updated, never ignores metadata":[""],"lock imported templates (false by default)":[""],"makes the template default meaning it will be automatically associated with newly created organizations and locations (false by default)":[""],"List all bookmarks":["모든 북마크 목록 나열 "],"Show a bookmark":["북마크 표시 "],"Create a bookmark":["북마크 생성 "],"Update a bookmark":["북마크 업데이트 "],"Delete a bookmark":["북마크 삭제 "],"List all global parameters":[""],"Display hidden values":[""],"Show a global parameter":["글로벌 매개 변수 표시 "],"Type of value":[""],"Create a global parameter":["글로벌 매개 변수 생성 "],"Update a global parameter":["글로벌 매개 변수 업데이트 "],"Delete a global parameter":["글로벌 매개 변수 삭제 "],"List of compute attributes for provided compute profile and compute resource":[""],"List of compute attributes for compute resource":[""],"List of compute attributes for compute profile":[""],"List of compute attributes":[""],"ID of compute profile":[""],"ID of compute_resource":[""],"Show a compute attributes set":[""],"Create a compute attributes set":["컴퓨팅 속성 세트 생성 "],"Update a compute attributes set":["컴퓨팅 속성 세트 업데이트 "],"List of compute profiles":["컴퓨터 프로파일 목록 "],"Show a compute profile":["컴퓨터 프로파일 표시 "],"Create a compute profile":["컴퓨터 프로파일 생성 "],"Update a compute profile":["컴퓨터 프로파일 업데이트 "],"Delete a compute profile":["컴퓨터 프로파일 삭제 "],"List all compute resources":["모든 컴퓨터 리소스 목록 나열 "],"Show a compute resource":["컴퓨터 리소스 표시 "],"Providers include %{providers}":["공급자에 %{providers}이(가) 포함되어 있습니다"],"URL for %{providers_requiring_url}":[""],"Username for oVirt, EC2, VMware, OpenStack. Access Key for EC2.":["oVirt, EC2, VMware, OpenStack의 사용자 이름. EC2의 액세스 키."],"Password for oVirt, EC2, VMware, OpenStack. Secret key for EC2":["oVirt, EC2, VMware, OpenStack의 암호. EC2의 비밀 키"],"for oVirt, VMware Datacenter":["oVirt, VMware Datacenter의 경우"],"for oVirt only, ID or Name of quota to use":[""],"for oVirt only":[""],"for AzureRm eg. 'eastus' and for EC2 only. Use '%s' for EC2 GovCloud region":[""],"for OpenStack and AzureRm only":[""],"for OpenStack (v3) only":[""],"for VMware":["VMware의 경우"],"for Libvirt and VMware only":["Libvirt 및 VMware만 해당"],"for Libvirt and oVirt only":[""],"enable caching, for VMware only":[""],"Project id for GCE only":[""],"Email for GCE only":[""],"Certificate path for GCE only":[""],"for GCE only":[""],"Create a compute resource":["컴퓨터 리소스 생성 "],"Update a compute resource":["컴퓨터 리소스 업데이트 "],"Delete a compute resource":["컴퓨터 리소스 삭제 "],"List available images for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 이미지 나열 "],"List available clusters for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 클러스터 나열 "],"List available flavors for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 종류 나열"],"List available folders for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 폴더 나열 "],"List available zone for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 영역 나열"],"List available networks for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 네트워크 나열 "],"List available networks for a compute resource cluster":["컴퓨터 리소스 클러스터에 대해 사용 가능한 네트워크 나열 "],"List available vnic profiles for a compute resource, for oVirt only":[""],"List resource pools for a compute resource cluster":["컴퓨터 리소스 클러스터의 리소스 풀 목록 나열 "],"List attributes for a given storage domain":["지정된 스토리지 도메인에 대한 속성 나열 "],"List storage domains for a compute resource":["컴퓨터 리소스의 스토리지 도메인 목록 나열 "],"List attributes for a given storage pod":["지정된 스토리지 포드에 대한 속성 나열"],"List storage pods for a compute resource":["컴퓨터 리소스의 스토리지 포드 나열"],"List available security groups for a compute resource":["컴퓨터 리소스에 대해 사용 가능한 보안 그룹 나열"],"Associate VMs to Hosts":["VM을 호스트에 연결 "],"Associating VMs is not supported for this compute resource":[""],"Refresh Compute Resource Cache":[""],"Successfully refreshed the cache.":[""],"Failed to refresh the cache.":[""],"Cache refreshing is not supported for %s":[""],"List available virtual machines for a compute resource":[""],"Show a virtual machine":[""],"Virtual machine was not found by id %{vm_id}":[""],"Power a Virtual Machine":[""],"%{action} %{vm}":[""],"stopping":[""],"starting":[""],"Delete a Virtual Machine":[""],"%s VM failed while processing: check logs for more details.":[""],"No VMs matched any host":[""],"List all reports":["모든 보고서 나열 "],"Show a report":["보고서 표시 "],"Hostname or certname":["호스트 이름 또는 인증서 이름 "],"UTC time of report":["보고서의 UTC 시간"],"Hash of status type totals":["상태 유형의 해시 합계 "],"Hash of report metrics, can be just {}":["보고서 메트릭스의 해시는 {}이 될 수 있습니다 "],"Optional array of log hashes":["로그 해시 옵션 배열 "],"Create a report":["보고서 생성 "],"Delete a report":["보고서 삭제 "],"Show the last report for a host":["호스트의 마지막 보고서 표시"],"Get dashboard details":["대시보드 상세 정보 얻기 "],"Total hosts count":[""],"Hosts with error state":[""],"Hosts with error state and alerts enabled":[""],"Hosts which recently applied changes":[""],"Hosts which recently applied changes successfully":[""],"Hosts which recently applied changes successfully with alerts enabled":[""],"Hosts without changes or errors":[""],"Hosts without changes or errors, with alerts enabled":[""],"Out of sync hosts":["비동기 호스트 "],"Out of sync hosts with alerts enabled":[""],"Hosts with alerts disabled":["통지가 비활성화되어 있는 호스트 "],"Hosts that had pending changes":["보류 중인 변경 사항이 있는 호스트 "],"Hosts that had pending changes with alerts enabled":[""],"Hosts without errors":[""],"Hosts without errors, with alerts enabled":[""],"Hosts without errors percent":[""],"Hosts which are not reporting":[""],"List of domains":["도메인 목록 "],"List of domains per subnet":["서브넷 별 도메인 목록"],"List of domains per location":["위치별 도메인 목록"],"List of domains per organization":["조직별 도메인 목록"],"ID of subnet":["서브넷 ID "],"Show a domain":["도메인 표시 "],"Numerical ID or domain name":["숫자로된 ID 또는 도메인 이름 "],"Display hidden parameter values":[""],"The full DNS domain name":["전체 DNS 도메인 이름 "],"Description of the domain":["도메인 설명 "],"Array of parameters (name, value)":["매개 변수 (이름, 값)의 배열 "],"Create a domain":["도메인 생성 "],"Invalid smart-proxy id":[""],"Update a domain":["도메인 업데이트 "],"Delete a domain":["도메인 삭제 "],"List all external user groups for user group":["사용자 그룹의 모든 외부 사용자 그룹 목록 나열 "],"List all external user groups for LDAP authentication source":["LDAP 인증 소스에 대한 모든 외부 사용자 그룹 나열 "],"ID or name of user group":["ID 또는 사용자 그룹 이름 "],"Show an external user group for user group":["사용자 그룹에 대한 외부 사용자 그룹 표시"],"Show an external user group for LDAP authentication source":["LDAP 인증 소스에 대한 모든 외부 사용자 그룹 표시 "],"ID or name of external user group":["ID 또는 외부 사용자 그룹 이름 "],"External user group information":["외부 사용자 그룹 정보 "],"External user group name":["외부 사용자 그룹 이름 "],"ID of linked authentication source":["연결된 인증 소스 ID "],"Create an external user group linked to a user group":["사용자 그룹에 연결된 외부 사용자 그룹 생성 "],"Update external user group":["외부 사용자 그룹 업데이트 "],"Refresh external user group":["외부 사용자 그룹 새로고침 "],"Delete an external user group":["외부 사용자 그룹 삭제 "],"ID or name external user group":["ID 또는 외부 사용자 그룹 이름 "],"List all fact values":["모든 팩트 값 나열 "],"List all fact values of a given host":["지정된 호스트의 모든 팩트 값 나열 "],"List all filters":["모든 필터 목록 나열 "],"Show a filter":["필터 표시 "],"Create a filter":["필터 생성 "],"Update a filter":["필터 업데이트 "],"Delete a filter":["필터 삭제 "],"Show available API links":["사용 가능한 API 링크 표시"],"Show status":["상태 표시 "],"List of host statuses":[""],"List all host groups":["모든 호스트 그룹 목록 나열 "],"List all host groups per location":["위치 별 모든 호스트 그룹 나열 "],"List all host groups per organization":["조직 별 모든 호스트 그룹 나열 "],"Array of extra information types to include":[""],"Show a host group":["호스트 그룹 표시 "],"Name of the host group":["호스트 그룹의 이름"],"Host group description":[""],"Parent ID of the host group":["호스트 그룹의 부모 ID"],"Compute profile ID":["컴퓨터 프로파일 ID"],"Compute resource ID":[""],"Operating system ID":["운영 체제 ID"],"Architecture ID":["아키텍처 ID"],"DHCP filename option (Grub2/PXELinux by default)":[""],"Media ID":["미디어 ID"],"Partition table ID":["파티션 테이블 ID"],"Subnet ID":["서브넷 ID"],"Subnet IPv6 ID":[""],"Domain ID":["도메인 ID"],"Realm ID":["영역 ID"],"Array of parameters":[""],"Name of the parameter":["매개 변수의 이름"],"Parameter value":["매개 변수 값"],"Root password on provisioned hosts":["프로비저닝된 호스트의 root 암호"],"Create a host group":["호스트 그룹 생성 "],"Update a host group":["호스트 그룹 업데이트 "],"Delete a host group":["호스트 그룹 삭제 "],"Cannot delete group %{current} because it has nested host groups.":["중첩된 호스트 그룹이 있기 때문에 그룹 %{current}을(를) 삭제할 수 없습니다 "],"Clone a host group":["호스트 그룹 복제 "],"Rebuild orchestration config":["오케스트레이션 구성 다시 빌드"],"Limit rebuild steps, valid steps are %{host_rebuild_steps}":[""],"Operate on child hostgroup hosts":[""],"Configuration successfully rebuilt.":["구성이 다시 빌드되었습니다."],"Configuration rebuild failed for: %s.":["다음으로 인해 구성을 다시 빌드하지 못했습니다: %s."],"List all hosts":["모든 호스트 목록 나열 "],"List all hosts for a host group":["호스트 그룹 별 모든 호스트 나열 "],"List hosts per location":["위치별 호스트 나열 "],"List hosts per organization":["조직 별 호스트 나열 "],"Only list ID and name of hosts":[""],"ID of host group":["호스트 그룹 ID "],"ID of location":["위치 ID "],"ID of organization":["조직 ID "],"Show a host":["호스트 표시 "],"not required if using a subnet with DHCP proxy":["DHCP 프록시를 갖는 서브넷을 사용할 필요가 없습니다 "],"required for managed host that is bare metal, not required if it's a virtual machine":["관리 호스트가 베어 메탈일 경우 필요하지만 가상 머신일 경우 필요하지 않습니다 "],"required if host is managed and value is not inherited from host group":["호스트가 관리되고 있으며 값이 호스트 그룹에서 상속되지 않은 경우에 필요합니다 "],"required if not imaged based provisioning and host is managed and value is not inherited from host group":["이미지 기반의 프로비저닝이 아니고 호스트가 관리되어 값이 호스트 그룹에서 상속되지 않은 경우에 필요합니다 "],"required if host is managed and custom partition has not been defined":["호스트가 관리되고 있으며 사용자 정의 파티션이 정의되고 있지 않은 경우에 필요합니다 "],"nil means host is bare metal":["nil은 호스트가 베어 메탈임을 의미합니다 "],"required if host is managed and value is not inherited from host group or default password in settings":["호스트가 관리되고 있으며 값이 호스트 그룹이나 설정의 기본값 암호에서 상속되지 않은 경우에 필요합니다 "],"Host's owner type":["호스트의 소유자 유형"],"Host's parameters (array or indexed hash)":["호스트의 매개 변수(배열 또는 인덱싱된 해시)"],"Include this host within Foreman reporting":["이 호스트를 Foreman 보고서에 포함 "],"The method used to provision the host.":[""],"True/False flag whether a host is managed or unmanaged. Note: this value also determines whether several parameters are required or not":["호스트를 관리할 지 또는 관리하지 않을지에 대한 True/False 플래그입니다. 알림: 이 값은 여러 매개 변수가 필요할 지 또는 필요하지 않을 지에 대한 여부를 결정합니다 "],"UUID to track orchestration tasks status, GET /api/orchestration/:UUID/tasks":["오케스트레이션 작업 상태를 추적하기 위한 UUID, GET /api/orchestration/:UUID/tasks"],"Additional information about this host":["호스트에 대한 추가 정보 "],"Host's network interfaces.":["호스트의 네트워크 인터페이스입니다."],"ID of interface":["인터페이스 ID"],"Additional compute resource specific attributes.":["컴퓨팅 리소스별 추가 속성입니다."],"Parameters for host's %s facet":["호스트의 %s 패싯에 대한 매개 변수"],"Create a host":["호스트 생성 "],"Overwrite existing host (true by default)":[""],"Update a host":["호스트 업데이트 "],"Delete a host":["호스트 삭제 "],"Get ENC values of host":[""],"Get status of host":["호스트 상태 가져오기 "],"status type, can be one of\\n* global\\n* configuration\\n* build\\n":["상태 유형으로, 다음 중 하나일 수 있습니다.\\n* global\\n* configuration\\n* build\\n"],"Returns string representing a host status of a given type":["지정한 유형의 호스트 상태를 나타내는 문자열을 반환합니다."],"Status %s does not exist.":[""],"Clear sub-status of host":[""],"status type\\n":[""],"Clears a host sub-status of a given type":[""],"Cannot delete global status.":[""],"Get vm attributes of host":["호스트의 vm 속성 가져오기"],"Disassociate the host from a VM":["VM에서 호스트 연결 해제 "],"Run a power operation on host":["호스트에서 전원 작업을 실행합니다 "],"power action, valid actions are (on/start), (off/stop), (soft/reboot), (cycle/reset), (state/status)":["전원 동작, 유효한 동작은 (on/start), (off/stop), (soft/reboot), (cycle/reset), (state/status)입니다."],"Power operations are not enabled on this host.":[""],"Unknown power action: available methods are %s":["알 수 없는 전원 동작: 사용 가능한 방법은 %s입니다 "],"Fetch the status of whether the host is powered on or not. Supported hosts are VMs and physical hosts with BMCs.":[""],"Timeout to retrieve the power status of the host in seconds. Default is 3 seconds.":[""],"Failed to fetch power status: %s":[""],"Boot host from specified device":["지정된 장치에서 호스트 부팅 "],"boot device, valid devices are disk, cdrom, pxe, bios":["부팅 장치, 유효한 장치는 디스크, CDROM, PXE, BIOS입니다"],"Unknown device: available devices are %s":["알 수 없는 장치: 사용 가능한 장치는 %s입니다 "],"Upload facts for a host, creating the host if required":["호스트의 팩트를 업로드하고 필요한 경우 호스트를 생성합니다 "],"hostname of the host":["호스트의 호스트 이름 "],"hash containing the facts for the host":["호스트의 팩트가 포함된 해시 "],"optional: certname of the host":["옵션: 호스트의 인증서 이름 "],"optional: the STI type of host to create":["옵션: 생성할 호스트의 STI 유형 "],"Preview rendered provisioning template content":["렌더링된 프로비저닝 템플릿 컨텐츠 미리 보기"],"Template kinds, available values: %{template_kinds}":["템플릿 종류로, 사용 가능한 값은 다음과 같습니다: %{template_kinds}"],"No template with kind %{kind} for %{host}":["종류가 %{kind}인 %{host}의 템플릿이 없습니다."],"Get provisioning templates for the host":[""],"No templates found for %{host}":[""],"Invalid type for host creation via facts: %s":["팩트를 통한 호스트 생성의 잘못된 유형: %s"],"A problem occurred when detecting host type: %s":["호스트 유형을 감지하는 동안 문제가 발생했습니다: %s"],"List of HTTP Proxies":[""],"Show an HTTP Proxy":[""],"Identifier of the HTTP Proxy":[""],"The HTTP Proxy name":[""],"URL of the HTTP Proxy":[""],"Username used to authenticate with the HTTP Proxy":[""],"Password used to authenticate with the HTTP Proxy":[""],"Create an HTTP Proxy":[""],"Update an HTTP Proxy":[""],"Delete an HTTP Proxy":[""],"List all images for a compute resource":["컴퓨터 리소스의 모든 이미지 목록 나열 "],"List all images for operating system":["운영 체제의 모든 이미지 목록 나열 "],"List all images for architecture":["아키텍처의 모든 이미지 목록 나열 "],"ID of compute resource":["컴퓨터 리소스 ID "],"ID of architecture":["아키텍쳐 ID "],"Show an image":["이미지 보기 "],"Template ID in the compute resource":[""],"Whether or not the image supports user data":["이미지가 사용자 데이터를 지원하는지 여부"],"Create an image":["이미지 생성 "],"Update an image":["이미지 업데이트 "],"Delete an image":["이미지 삭제"],"Assign a host to the Foreman instance":[""],"List hosts forming the Foreman instance":[""],"Unassign a given host from the Foreman instance":[""],"List all interfaces for host":["호스트의 모든 인터페이스 목록 나열 "],"List all interfaces for domain":["도메인의 모든 인터페이스 목록 나열 "],"List all interfaces for subnet":["서브넷의 모든 인터페이스 목록 나열 "],"ID or name of host":["ID 또는 호스트 이름 "],"ID or name of domain":["ID 또는 도메인 이름 "],"ID or name of subnet":["ID 또는 서브넷 이름 "],"Show an interface for host":["호스트의 인터페이스 표시 "],"ID or name of interface":["ID 또는 인터페이스 이름 "],"MAC address of interface. Required for managed interfaces on bare metal.":["인터페이스의 MAC 주소입니다. 베어 메탈에서 관리형 인터페이스에 필요합니다."],"IPv4 address of interface":[""],"IPv6 address of interface":[""],"Interface type, e.g. bmc. Default is %{default_nic_type}":["인터페이스 유형(예: bmc)입니다. 기본값은 %{default_nic_type}입니다."],"Interface's DNS name":["인터페이스의 DNS 이름"],"Foreman subnet ID of IPv4 interface":[""],"Foreman subnet ID of IPv6 interface":[""],"Foreman domain ID of interface. Required for primary interfaces on managed hosts.":["인터페이스의 Foreman 도메인 ID입니다. 관리형 호스트의 기본 인터페이스에 필요합니다."],"Device identifier, e.g. eth0 or eth1.1":["장치 식별자. 예: eth0 또는 eth1.1"],"Should this interface be managed via DHCP and DNS smart proxy and should it be configured during provisioning?":["이 인터페이스는 DHCP 및 DNS 스마트 프록시를 통해 관리하고 프로비저닝 동안 설정해야 합니까? "],"Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface.":["호스트의 FQDN을 구성하는 데 이 인터페이스를 사용하시겠습니까? 관리형 호스트마다 기본 인터페이스가 하나씩 필요합니다."],"Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface.":["이 인터페이스를 PXELinux의 TFTP(또는 이미지 기반 호스트의 SSH)에 사용하시겠습니까? 관리형 호스트마다 프로비저닝 인터페이스가 하나씩 필요합니다."],"Only for BMC interfaces.":["BMC 인터페이스만 해당합니다."],"Interface provider, e.g. IPMI. Only for BMC interfaces.":["인터페이스 공급자 (예: IPMI). BMC 인터페이스의 경우에만 사용할 수 있습니다. "],"Alias or VLAN device":["별칭 또는 VLAN 장치 "],"VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces.":["VLAN 태그입니다. 이 속성은 서브넷 VLAN ID 보다 우선합니다. 가상 인터페이스의 경우에만 사용됩니다. "],"MTU, this attribute has precedence over the subnet MTU.":[""],"Identifier of the interface to which this interface belongs, e.g. eth1. Only for virtual interfaces.":["이 인터페이스가 속한 인터페이스의 ID (예: eth1) 가상 인터페이스의 경우에만 사용할 수 있습니다. "],"Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.":["인터페이스의 본드 모드 (예: balance-rr). 본드 인터페이스에만 사용됩니다. "],"Identifiers of attached interfaces, e.g. `['eth1', 'eth2']`. For bond interfaces those are the slaves. Only for bond and bridges interfaces.":["연결된 인터페이스의 ID(예: `['eth1', 'eth2']`)입니다. 본드 인터페이스의 경우 슬레이브가 됩니다. 본드 및 브리지 인터페이스에만 적용됩니다."],"Space separated options, e.g. miimon=100. Only for bond interfaces.":["공백으로 구분된 옵션 (예: miimon=100). 본드 인터페이스의 경우에만 사용합니다. "],"Additional compute resource specific attributes for the interface.":["인터페이스의 컴퓨팅 리소스별 추가 속성입니다."],"interface information":["인터페이스 정보 "],"Create an interface on a host":["호스트에 인터페이스 생성 "],"Update a host's interface":["호스트 인터페이스 업데이트 "],"Delete a host's interface":["호스트 인터페이스 삭제 "],"a location":["위치 "],"List of email notifications":["이메일 통지의 목록"],"Mail notification interval option, e.g. Daily, Weekly or Monthly. Required for summary notification":[""],"Mail notification subscription option, e.g. Subscribe, Subscribe to my hosts or Subscribe to all hosts. Required for host built and config error state":[""],"Relevant only for audit summary notification":[""],"Show an email notification":["이메일 통지 표시"],"Numerical ID or email notification name":["숫자 ID 또는 이메일 통지 이름"],"Add an email notification for a user":[""],"User mail notification already exists. Use the update action":[""],"Update an email notification for a user":[""],"No user mail notification to update. Use the create action":[""],"Remove an email notification for a user":[""],"You do not have permission to delete a mail notification of another user":[""],"List all email notifications for a user":[""],"Interval or subscription option is missing":[""],"You do not have permission to add a mail notification to another user":[""],"Interval option is needed":[""],"Subscription option is needed":[""],"Interval option is not valid":[""],"Subscription option is not valid":[""],"Mail query is not valid":[""],"Operating system family, available values: %{operatingsystem_families}":["운영 체제 제품군. 사용 가능한 값: %{operatingsystem_families}"],"List all installation media":["모든 설치 미디어 목록 나열 "],"List all media for an operating system":["운영 체제의 모든 미디어 목록 나열 "],"List all media per location":["위치 별 모든 미디어 나열 "],"List all media per organization":["조직 별 모든 미디어 나열 "],"Show a medium":["미디어 표시 "],"Name of media":["미디어 이름"],"Create a medium":["미디어 생성 "],"Update a medium":["미디어 업데이트 "],"Delete a medium":["미디어 삭제 "],"List all hardware models":["모든 하드웨어 모델 목록 나열 "],"Show a hardware model":["하드웨어 모델 표시 "],"Create a hardware model":["하드웨어 모델 생성 "],"Update a hardware model":["하드웨어 모델 업데이트 "],"Delete a hardware model":["하드웨어 모델 삭제 "],"List all operating systems":["모든 운영 체제 목록 나열 "],"List all operating systems for nested architecture":["중첩된 아키텍처의 모든 운영 체제 목록 나열 "],"List all operating systems for nested medium":["중첩된 미디어의 모든 운영 체제 목록 나열 "],"List all operating systems for nested partition table":["중첩된 파티션 테이블의 모든 운영 체제 목록 나열 "],"List all operating systems for nested provisioning template":["중첩된 프로비저닝 템플릿의 모든 운영 체제 목록 나열 "],"ID of medium":["미디어 ID "],"ID of partition table":["파티션 테이블 ID "],"ID of template":["템플릿 ID "],"Show an operating system":["운영 체제 표시 "],"Root password hash function to use":[""],"IDs of associated architectures":["관련 아키텍처의 ID"],"IDs of associated provisioning templates":["관련 프로비저닝 템플릿의 ID"],"IDs of associated media":["관련 미디어의 ID"],"IDs of associated partition tables":["관련 파티션 테이블의 ID"],"Create an operating system":["운영 체제 생성 "],"Update an operating system":["운영 체제 업데이트 "],"Delete an operating system":["운영 체제 삭제 "],"List boot files for an operating system":["운영 체제의 부트 파일을 나열 "],"an organization":["조직 "],"List default templates combinations for an operating system":["운영 체제의 기본값 템플릿 조합 나열 "],"List operating systems where this template is set as a default":["템플릿이 기본값으로 설정되는 운영 체제를 나열 "],"ID of provisioning template":["프로비저닝 템플릿 ID "],"Show a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 표시 "],"Create a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 생성 "],"Update a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 업데이트 "],"Delete a default template combination for an operating system":["운영 체제의 기본값 템플릿 조합 삭제 "],"List all parameters for a host":["호스트의 모든 매개 변수 목록 나열 "],"List all parameters for a host group":["호스트 그룹의 모든 매개 변수 목록 나열 "],"List all parameters for a domain":["도메인의 모든 매개 변수 목록 나열 "],"List all parameters for an operating system":["운영 체제의 모든 매개 변수 목록 나열 "],"List all parameters for a location":["위치 별 모든 매개 변수 나열 "],"List all parameters for an organization":["조직 별 모든 매개 변수 나열 "],"List all parameters for a subnet":[""],"ID of host":["호스트 ID "],"ID of domain":["도메인 ID"],"Show a nested parameter for a host":["호스트의 중첩된 매개 변수 표시 "],"Show a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 표시 "],"Show a nested parameter for a domain":["도메인의 중첩된 매개 변수 표시 "],"Show a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 표시 "],"Show a nested parameter for a location":["위치의 중첩된 매개 변수 표시 "],"Show a nested parameter for an organization":["조직의 중첩된 매개 변수 표시 "],"Show a nested parameter for a subnet":[""],"ID of parameter":["매개변수 ID "],"Create a nested parameter for a host":["호스트의 중첩된 매개 변수 생성 "],"Create a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 생성 "],"Create a nested parameter for a domain":["도메인의 중첩된 매개 변수 생성 "],"Create a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 생성 "],"Create a nested parameter for a location":["위치의 중첩된 매개 변수 생성 "],"Create a nested parameter for an organization":["조직의 중첩된 매개 변수 생성 "],"Create a nested parameter for a subnet":[""],"Update a nested parameter for a host":["호스트의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a domain":["도메인의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a location":["위치의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for an organization":["조직의 중첩된 매개 변수 업데이트 "],"Update a nested parameter for a subnet":[""],"Delete a nested parameter for a host":["호스트의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a host group":["호스트 그룹의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a domain":["도메인의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for an operating system":["운영 체제의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a location":["위치의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for an organization":["조직의 중첩된 매개 변수 삭제 "],"Delete a nested parameter for a subnet":[""],"Delete all nested parameters for a host":["호스트의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for a host group":["호스트 그룹의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for a domain":["도메인의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for an operating system":["운영 체제의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameter for a location":["위치의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameter for an organization":["조직의 모든 중첩된 매개 변수 삭제 "],"Delete all nested parameters for a subnet":[""],"List all permissions":["모든 권한 나열 "],"Show a permission":["권한 표시 "],"List available resource types":[""],"List all Personal Access Tokens for a user":[""],"ID of the user":[""],"Show a Personal Access Token for a user":[""],"Expiry Date":[""],"Create a Personal Access Token for a user":[""],"Revoke a Personal Access Token for a user":[""],"Shows status of Foreman system and it's subcomponents":[""],"This service is available for unauthenticated users":["서비스는 인증되지 않은 사용자가 사용할 수 있습니다 "],"Shows status and version information of Foreman system and it's subcomponents":[""],"This service is only available for authenticated users":["이 서비스는 인증된 사용자만 사용할 수 있습니다 "],"List installed plugins":["설치된 플러그인 나열 "],"List provisioning templates":["프로비저닝 템플릿 목록 나열 "],"List provisioning templates per operating system":["운영 체제 별 프로비저닝 템플릿 목록 나열 "],"List provisioning templates per location":["위치별 프로비저닝 템플릿 목록 나열 "],"List provisioning templates per organization":["조직 별 프로비저닝 템플릿 목록 나열 "],"Show provisioning template details":["프로비저닝 템플릿 상세 정보 표시 "],"template name":["템플릿 이름 "],"not relevant for snippet":["조각 모음과 관련이 없습니다 "],"Array of template combinations (hostgroup_id, environment_id)":["템플릿 조합 (hostgroup_id, environment_id)의 배열 "],"Array of operating system IDs to associate with the template":["템플릿에 연결할 운영체제 ID 배열 "],"Whether or not the template is locked for editing":["편집을 위한 템플릿의 잠금 여부 "],"Create a provisioning template":["프로비저닝 템플릿 생성 "],"Import a provisioning template":[""],"template contents including metadata":[""],"Update a provisioning template":["프로비저닝 템플릿 업데이트 "],"template version":["템플릿 버전 "],"Delete a provisioning template":["프로비저닝 템플릿 삭제 "],"Update the default PXE menu on all configured TFTP servers":["설정된 모든 TFTP 서버에 있는 기본 PXE 메뉴 업데이트 "],"Clone a provision template":["프로비저닝 템플릿 복제"],"Export a provisioning template to ERB":[""],"List all partition tables":["모든 파티션 테이블 목록 나열 "],"List all partition tables for an operating system":["운영 체제의 모든 파티션 테이블 목록 나열 "],"List all partition tables per location":["위치별 모든 파티션 테이블 나열"],"List all partition tables per organization":["조직별 모든 파티션 테이블 나열"],"Show a partition table":["파티션 테이블 표시"],"Array of operating system IDs to associate with the partition table":["파티션 테이블에 연결할 운영 체제 ID 배열"],"Array of host IDs to associate with the partition table":["파티션 테이블에 연결할 호스트 ID 배열"],"Array of host group IDs to associate with the partition table":["파티션 테이블에 연결할 호스트 그룹 ID 배열"],"Create a partition table":["파티션 테이블 생성 "],"Update a partition table":["파티션 테이블 업데이트 "],"Delete a partition table":["파티션 테이블 삭제 "],"Clone a template":["템플릿 복제"],"Export a partition template to ERB":[""],"List of realms":["영역 목록 "],"Show a realm":["영역 표시 "],"Numerical ID or realm name":["숫자로된 ID 또는 영역 이름 "],"The realm name, e.g. EXAMPLE.COM":["영역 이름 예: EXAMPLE.COM"],"Realm type, e.g. FreeIPA or Active Directory":["영역 유형. 예: FreeIPA 또는 활성 디렉토리 "],"Create a realm":["영역 생성 "],"Update a realm":["영역 업데이트 "],"Delete a realm":["영역 삭제 "],"Generate global registration command":[""],"ID of the Organization to register the host in":[""],"ID of the Location to register the host in":[""],"ID of the Host group to register the host in":[""],"ID of the Operating System to register the host in. Operating system must have a `host_init_config` template assigned":[""],"ID of the Smart Proxy. This Proxy must have enabled both the 'Templates' and 'Registration' features":[""],"Set 'host_registration_insights' parameter for the host. If it is set to true, insights client will be installed and registered on Red Hat family operating systems":[""],"Set 'host_registration_remote_execution' parameter for the host. If it is set to true, SSH keys will be installed on the host":[""],"Expiration of the authorization token (in hours)":[""],"Enable insecure argument for the initial curl":[""],"Packages to install on the host when registered. Can be set by `host_packages` parameter, example: `pkg1 pkg2`":[""],"Update all packages on the host":[""],"Repository URL / details, for example for Debian OS family: 'deb http://deb.example.com/ buster 1.0', for Red Hat and SUSE OS family: 'http://yum.theforeman.org/client/latest/el8/x86_64/'":[""],"URL of the GPG key for the repository":[""],"Operating system doesn't have a 'host_init_config' template assigned.":[""],"Render Global registration template":[""],"ID of the Operating System to register the host in":[""],"Repository URL / details, for example for Debian OS family: 'deb http://deb.example.com/ buster 1.0', for Red Hat OS family: 'http://yum.theforeman.org/client/latest/el8/x86_64/'":[""],"Global Registration Template with name %s defined via default_global_registration_item Setting not found, please configure the existing template name first":[""],"Find or create a host and render the 'Host initial configuration' template":[""],"IPv4 address, not required if using a subnet with DHCP proxy":[""],"IPv6 address, not required if using a subnet with DHCP proxy":[""],"Host's network interfaces":[""],"Unable to find 'Host initial configuration' template for host %{host} running %{os}, associate the 'Host initial configuration' template for this OS first":[""],"List all report templates":[""],"List all report templates per location":[""],"List all report templates per organization":[""],"Show a report template":[""],"Whether or not the template is added automatically to new organizations and locations":[""],"Create a report template":[""],"Import a report template":[""],"Update a report template":[""],"Delete a report template":[""],"Export a report template to ERB":[""],"Generate report from a template":[""],"Hash of input values where key is the name of input, value is the value for this input":[""],"Compress the report uzing gzip":[""],"Report format, defaults to '%s'":[""],"Generating Report template failed for: %s.":[""],"Schedule generating of a report":[""],"Compress the report using gzip":[""],"If set, scheduled report will be delivered via e-mail. Use '%s' to separate multiple email addresses.":[""],"UTC time to generate report at":[""],"Scheduling Report template failed for: %s.":[""],"Downloads a generated report":[""],"ID assigned to generating job by the schedule command":[""],"Generating of report has been canceled":[""],"Report data are not available, it has probably expired.":[""],"Report not found, please ensure you used the correct job_id":[""],"Data are available only for the user who triggered the report and administrators":[""],"List all roles":["모든 역할 나열 "],"Show a role":["역할 표시 "],"Role description":[""],"Create a role":["역할 생성 "],"Update a role":["역할 업데이트 "],"Delete a role":["역할 삭제 "],"Clone a role":[""],"Alias for setting name":[""],"Setting unique name":[""],"Setting full user readable name":[""],"The category of setting":[""],"The human readable name of settings category":[""],"Value type, that the setting accepts":[""],"Describes the purpose of the setting":[""],"Default value for the setting":[""],"Setting current value. If this setting is encypted, the value will not be returned":[""],"Is this setting readonly?":[""],"Is this setting encrypted?":[""],"If this setting needs to be changed in file, it will have the file path.":[""],"If this setting has list of possible values, this includes the list of the values.":[""],"Last updated. NOTE: this will be reset to application install time, when setting is reset to default value.":[""],"List all settings":["모든 설정 목록 나열 "],"List of all settings":[""],"Show a setting":["설정 표시"],"Information about the setting":[""],"Update a setting":["설정 업데이트 "],"Information about the updated setting":[""],"No setting value provided.":["제공된 설정 값이 없습니다."],"List all smart proxies":["모든 스마트 프록시 나열 "],"Flag to indicate whether to include status or not":[""],"Show a smart proxy":["스마트 프록시 표시"],"Flag to indicate whether to include version or not":[""],"Create a smart proxy":["스마트 프록시 생성 "],"Update a smart proxy":["스마트 프록시 업데이트 "],"Delete a smart proxy":["스마트 프록시 삭제 "],"Refresh smart proxy features":["스마트 프록시 기능 새로고침 "],"Import subnets from Smart proxy":[""],"Assign a host to the smart proxy":[""],"Get hosts forming the smart proxy":[""],"Unassign a given host from the smart proxy":[""],"List all SSH keys for a user":[""],"Show an SSH key from a user":[""],"Public SSH key":[""],"Add an SSH key for a user":[""],"Delete an SSH key for a user":[""],"List of subnets":["서브넷 목록 "],"List of subnets for a domain":["도메인의 서브넷 목록 "],"List of subnets per location":["위치별 서브넷 목록"],"List of subnets per organization":["조직별 서브넷 목록"],"Show a subnet":["서브넷 표시"],"Subnet name":["서브넷 이름 "],"Subnet description":[""],"Type or protocol, IPv4 or IPv6, defaults to IPv4":[""],"Subnet network":["서브넷 네트워크 "],"Network prefix in CIDR notation":[""],"Netmask for this subnet":["서브넷의 넷마스크 "],"Subnet gateway":[""],"Primary DNS for this subnet":["서브넷의 1차 DNS"],"Secondary DNS for this subnet":["서브넷의 2차 DNS "],"IP Address auto suggestion mode for this subnet.":[""],"External IPAM group - only relevant when IPAM is set to external":[""],"Starting IP Address for IP auto suggestion":["IP 자동 제안의 시작 IP 주소 "],"Ending IP Address for IP auto suggestion":["IP 자동 제안의 종료 IP 주소 "],"VLAN ID for this subnet":["서브넷의 VLAN ID"],"MTU for this subnet":[""],"Domains in which this subnet is part":["서브넷이 포함된 도메인 "],"Default boot mode for interfaces assigned to this subnet.":[""],"Create a subnet":["서브넷 생성 "],"Update a subnet":["서브넷 업데이트 "],"Subnet numeric identifier":["숫자로된 서브넷 식별자 "],"Delete a subnet":["서브넷 삭제 "],"Provides an unused IP address in this subnet":[""],"MAC address to reuse the IP for this host":[""],"IP addresses that should be excluded from suggestion":[""],"List of table preferences for a user":[""],"Table preference details of a given table":[""],"Name of the table":[""],"List of user selected columns":[""],"Creates a table preference for a given table":[""],"Updates a table preference for a given table":[""],"Delete a table preference for a given table":[""],"You are trying access the preferences of a different user":[""],"List all tasks for a given orchestration event":["지정된 오케스트레이션 이벤트의 모든 작업을 나열 "],"ID of config template":["구성 템플릿 ID"],"List template combination":["템플릿 조합 목록 나열 "],"host group id":["호스트 그룹 ID "],"Add a template combination":["템플릿 조합 추가 "],"Show template combination":["템플릿 조합 표시 "],"Update template combination":["템플릿 조합 업데이트"],"Delete a template combination":["템플릿 조합 삭제 "],"List template inputs":["템플릿 입력 나열"],"Show template input details":["템플릿 입력 정보 표시"],"Input name":["입력 이름"],"Input description":["입력 설명"],"Input is required":["입력 필요"],"Input is advanced":["입력이 진행됨"],"Input type":["입력 유형"],"Selectable values for user inputs":["사용자 입력으로 선택 가능한 값"],"Default value for user input":[""],"The value contains sensitive information and shouldn not be normally visible, useful e.g. for passwords":[""],"Value type, defaults to plain":[""],"For values of type search, this is the resource the value searches in":[""],"Create a template input":["템플릿 입력 생성"],"Delete a template input":["템플릿 입력 삭제"],"Update a template input":["템플릿 입력 업데이트"],"List all template kinds":["모든 템플릿 종류를 나열 "],"List all user groups":["모든 사용자 그룹 나열 "],"Show a user group":["사용자 그룹 표시"],"is an admin user group, can be modified by admins only":[""],"Create a user group":["사용자 그룹 생성 "],"Update a user group":["사용자 그룹 업데이트 "],"Delete a user group":["사용자 그룹 삭제 "],"List all users":["모든 사용자 나열 "],"List all users for LDAP authentication source":["LDAP 인증 소스에 대한 모든 사용자 나열 "],"List all users for external authentication source":[""],"List all users for user group":["사용자 그룹에 대한 모든 사용자 나열 "],"List all users for role":["역할에 대한 모든 사용자 나열 "],"List all users for location":["위치에 대한 모든 사용자 나열 "],"List all users for organization":["조직에 대한 모든 사용자 나열 "],"ID of LDAP authentication source":["LDAP 인증 소스 ID "],"ID of user group":["사용자 그룹 ID "],"ID of role":["역할 ID"],"Show a user":["사용자 표시 "],"Show the currently logged-in user":[""],"is an admin account":["관리자 계정입니다 "],"Required unless user is in an external authentication source":[""],"User's timezone":["사용자의 시간대"],"User's preferred locale":["사용자의 기본 로케일"],"Enable user's email":[""],"Required when user want to change own password":[""],"Create a user":["사용자 생성 "],"Update a user":["사용자 업데이트"],"Delete a user":["사용자 삭제 "],"You are trying to delete your own account":["자신의 계정을 삭제하려 하고 있습니다 "],"Use to authenticate against external authentication source":[""],"An email address is required, please update your account details":[""],"Invalid query":["잘못된 쿼리 "],"Data has been cleaned up":[""],"Administrator user account required":["관리자의 사용자 계정 필요"],"Successfully created %s.":["%s을(를) 성공적으로 생성했습니다. "],"Successfully updated %s.":["%s을(를) 성공적으로 업데이트했습니다. "],"Successfully deleted %s.":["%s을(를) 성공적으로 삭제했습니다. "],"Unknown action name for success message: %s":["성공 메세지의 알 수 없는 동작 이름: %s"],"Conflict - %s":["충돌 - %s"],"You must create at least one location before continuing.":["계속 진행하기 전 최소 하나의 위치를 생성해야 합니다. "],"You must create at least one organization before continuing.":["계속 진행하기 전 최소 하나의 조직을 생성해야 합니다. "],"OK":["확인"],"Bookmark was successfully updated":[""],"Error while trying to create resource: %s":[""],"No VMs matched any host.":[""],"%s VM was associated to a host.":[""],"Error while trying to update resource: %s":[""],"JSON VM listing is not supported for this compute resource.":["이 컴퓨팅 리소스에 대해서는 JSON VM 목록을 나열할 수 없습니다."],"VM already associated with a host":["호스트에 이미 연결된 VM"],"VM associated to host %s":["호스트 %s에 연결된 VM"],"No host found to associate this VM with":["이 VM에 연결된 호스트를 찾을 수 없음 "],"The virtual machine is being deleted.":["가상 머신이 삭제되어 있습니다. "],"Failed to set console: %s":["콘솔 설정에 실패했습니다: %s"],"%{vm} is now %{vm_state}":["%{vm}은 현재 %{vm_state}입니다 "],"failed to %{action} %{vm}":["%{vm}에 대한 %{action} 실행 실패 "],"Error - %{message}":["오류 - %{message}"],"To access %s API, you need to install the Foreman Puppet plugin":[""],"User IDs":["사용자 ID"],"Smart proxy IDs":["스마트 프록시 ID "],"Compute resource IDs":["컴퓨터 리소스 ID "],"Medium IDs":[""],"Partition template IDs":["파티션 템플릿 ID"],"Provisioning template IDs":["프로비저닝 템플릿 ID "],"Domain IDs":["도메인 ID"],"Realm IDs":["영역 ID "],"Host group IDs":["호스트 그룹 ID"],"Environment IDs":["환경 ID"],"Subnet IDs":["서브넷 ID "],"Parent ID":["부모 ID"],"List of resources types that will be automatically associated":[""],"Associated %{resource} IDs":[""],"List all :resource_id":["모두 나열 :resource_id "],"Show :a_resource":[":a_resource 표시 "],"Create :a_resource":[":a_resource 생성 "],"Update :a_resource":[":a_resource 업데이트 "],"Delete :a_resource":[":a_resource 삭제 "],"Cannot delete %{current} because it has nested %{sti_name}.":["%{current} 에는 중첩된 %{sti_name}이 있기 때문에 삭제할 수 없습니다."],"%{taxonomy} with id %{id} not found":[""],"%{taxonomy} stored in session with id %{id} not found":[""],"%s you had selected as your context has been deleted":[""],"Your session has expired, please login again":["세션이 만료되었습니다. 다시 로그인하십시오 "],"Operators":["운영자 "],"Invalid search query: %s":["잘못된 검색 쿼리: %s"],"The authentication source of your external user groups could not connect to LDAP with the provided credentials. Please verify the credentials are still valid.":[""],"An error happened trying to connect to LDAP, please verify the authentication source host is reachable from your Foreman host and is online.":[""],"The groups you added as external user groups were found. However, no users inside of them that match with your authentication source base DN and filter were found. Please verify the external user groups belong in the authentication source filter":[""],"Could not refresh external usergroups: %{e} - %{message} - %{suggestion}":[""],"There are migrations pending in the system.":[""],"No proxy selected!":["프록시를 선택하지 않았습니다."],"Invalid proxy selected!":["잘못된 프록시를 선택했습니다."],"Failed to set %{proxy_type} proxy for %{host}.":["%{host}의 %{proxy_type} 프록시를 설정하지 못했습니다."],"The %{proxy_type} proxy of the selected hosts was set to %{proxy_name}":[""],"The %{proxy_type} proxy of the selected hosts was cleared.":["선택한 호스트의 %{proxy_type} 프록시를 삭제했습니다."],"The %{proxy_type} proxy could not be set for host: %{host_names}.":[""],"The %{proxy_type} proxy of the selected hosts was set to %{proxy_name}.":["선택한 호스트의 %{proxy_type} 프록시가 %{proxy_name}(으)로 설정되었습니다."],"Puppet CA":["Puppet CA"],"There was an error rendering the %{name} template: %{error}":["%{name} 템플릿을 렌더링하는 도중 오류가 발생했습니다: %{error}"],"URL in :url parameter is missing a scheme, please set http:// or https://":[""],"Proxy lacks one of the following features: 'Registration', 'Templates'":[""],"All mismatches between hosts and %s have been fixed":["호스트와 %s 간의 모든 불일치가 수정되었습니다 "],"All mismatches between hosts and locations/organizations have been fixed":["호스트와 위치/조직 간의 모든 불일치가 수정되었습니다 "],"All hosts previously with no %{single} are now assigned to %{name}":["%{single}이 없는 이전의 모든 호스트는 %{name}에 할당됩니다"],"Selected hosts are now assigned to %s":["선택된 호스트는 %s에 할당되어 있습니다 "],"unable to find %{type} template for %{host} running %{os}":[""],"Successfully deleted report.":["보고서를 성공적으로 삭제했습니다."],"External user group %{name} refreshed":["외부 사용자 그룹 %{name}이(가) 새로고침되었습니다 "],"External user group %{name} could not be refreshed.":[""],"Filter overriding has been disabled":[""],"Unable to find registration template for host %{host} running %{os}":[""],"Registration token is missing or invalid.":[""],"Host is not associated with an operating system":[""],"The following fields would need reviewing":["다음 필드를 확인해야 합니다 "],"Cannot delete group %{current} because it has nested groups.":["그룹 %{current}에는 중첩된 그룹이 있기 때문에 삭제할 수 없습니다. "],"Disk":["디스크"],"CDROM":["CDROM"],"PXE":["PXE"],"BIOS":["BIOS"],"The marked fields will need reviewing":["표시된 필드는 확인해야 합니다 "],"Enabled %s for reboot and rebuild":["다시 부팅하고 다시 빌드하기 위해 %s을(를) 활성화 "],"Enabled %s for rebuild on next boot, but failed to power cycle the host":[""],"Failed to reboot %s.":["%s 재부팅에 실패했습니다. "],"Enabled %s for rebuild on next boot":["다음 부팅시 다시 빌드하기 위해 %s 활성화 "],"Failed to enable %{host} for installation: %{errors}":["설치를 위한 %{host} 활성화에 실패했습니다: %{errors}"],"Canceled pending build for %s":["%s의 보류 중인 빌드가 취소됨 "],"Failed to cancel pending build for %{hostname} with the following errors: %{errors}":[""],"%{host} is about to %{action}":["%{host}는 즉시 %{action}을 실행합니다 "],"Failed to %{action} %{host}: %{e}":["%{host}의 %{action} 실행 실패: %{e}"],"%{host} now boots from %{device}":["%{host}가 %{device}에서 부팅합니다 "],"Failed to configure %{host} to boot from %{device}: %{e}":["%{device}에서 부팅하도록 %{host} 설정에 실패했습니다: %{e}"],"Foreman now manages the build cycle for %s":["Foreman은 %s의 빌드 주기를 관리합니다 "],"Foreman now no longer manages the build cycle for %s":["Foreman은 %s의 빌드 주기를 더이상 관리하지 않습니다 "],"Failed to modify the build cycle for %s":["%s의 빌드 주기 변경에 실패했습니다 "],"%s has been disassociated from VM":["%s이(가) VM에서 연결 해제되었습니다 "],"Host %s is not associated with a VM":["호스트 %s는 VM에 연결되어 있지 않습니다 "],"No parameters were allocated to the selected hosts, can't mass assign":[""],"Updated all hosts!":["모든 호스트를 업데이트했습니다! "],"%s Parameters updated, see below for more information":["%s 매개 변수가 업데이트되었습니다. 보다 자세한 내용은 아래에서 참조하십시오 "],"No host group selected!":["선택된 호스트 그룹이 없습니다!"],"Updated hosts: changed host group":["업데이트된 호스트: 변경된 호스트 그룹 "],"No owner selected!":["소유자를 선택하지 않았습니다."],"Updated hosts: changed owner":["업데이트된 호스트: 변경된 소유자"],"Failed to set power state for %s.":["%s의 전원 상태를 설정하지 못했습니다."],"The power state of the selected hosts will be set to %s":["선택한 호스트의 전원 상태가 %s(으)로 설정됩니다."],"%{config_type} rebuild failed for host: %{host_names}.":[""],"Configuration successfully rebuilt":[""],"Failed to redeploy %s.":["%s을(를) 재배포하지 못했습니다."],"The selected hosts were enabled for reboot and rebuild":["선택한 호스트의 재부팅 및 재배포가 활성화되어 있습니다."],"The selected hosts will execute a build operation on next reboot":["선택된 호스트는 다음 부팅 시 빌드 작업을 수행합니다 "],"The following hosts failed the build operation: %s":["다음 호스트는 빌드 작업을 실패했습니다: %s"],"Destroyed selected hosts":["선택된 호스트 삭제"],"The following hosts were not deleted: %s":["다음 호스트는 삭제되지 않았습니다: %s"],"Updated hosts: Disassociated from VM":["업데이트된 호스트: VM에서 연결 해제 "],"Hosts with errors":["오류가 있는 호스트 "],"Active Hosts":["활성 호스트 "],"Pending Hosts":["보류 중인 호스트 "],"Hosts which didn't report in the last %s":[""],"Hosts with notifications disabled":["통지가 비활성화되어 있는 호스트 "],"invalid type: %s requested":["잘못된 유형: %s 필요 "],"Something went wrong while changing host type - %s":["호스트 유형을 변경하는 도중 문제가 발생했습니다 - %s"],"No hosts were found with that id, name or query filter":[""],"No hosts selected":["선택된 호스트가 없음 "],"Something went wrong while selecting hosts - %s":["호스트를 선택하는 도중 문제가 발생했습니다 - %s "],"%s selected hosts":["%s 선택된 호스트 "],"The following hosts were not %{action}: %{missed_hosts}":["다음 호스트에서 %{action}이 실행되지 않았습니다: %{missed_hosts}"],"No or invalid power state selected!":["전원 상태를 선택하지 않았거나 잘못 선택했습니다."],"The %{proxy_type} proxy of the selected hosts was cleared":[""],"No templates found":[""],"HTTP Proxy connection successful.":[""],"%{user} Downloaded %{key} as pem file":[""],"Successfully recreated":[""],"Could not recreate a new SSH key":[""],"Successfully delete %s":[""],"Could not delete %s":[""],"Report is going to be rendered at %s and it will be delivered via e-mail once ready.":[""],"Report is being rendered, it will be delivered via e-mail.":[""],"Could not generate the report, check the form for error messages":[""],"Filters overriding has been disabled":[""],"No changes found when refreshing features from %s.":["%s에서 기능을 새로 고침시 변경 사항을 찾을 수 없습니다. "],"Successfully refreshed features from %s.":["%s에서 기능을 성공적으로 새로고침했습니다. "],"No TFTP feature":["TFTP 기능 없음"],"Core and proxy versions do not match. foreman: %{foreman_version}, foreman-proxy: %{proxy_version}":[""],"No new IPv4 subnets found":[""],"No IPv4 subnets selected":[""],"Imported IPv4 Subnets":[""],"No host could be found for rendering the template":["템플릿을 렌더링할 호스트를 찾을 수 없습니다."],"Template locked":["템플릿 잠금 "],"Template unlocked":["템플릿 잠금 해제 "],"iPXE intermediate script '%s' not found":[""],"Global iPXE template '%s' not found":[""],"iPXE local boot template '%s' not found":[""],"Failed to get a new realm OTP. Terminating the build!":["새로운 영역 OTP를 가져오는데 실패했습니다. 빌드를 종료합니다!"],"An error occurred.":[""],"Unable to find user-data or cloud-init template for host %{host} running %{os}":[""],"Could not find host for request %{request_ip}":[""],"Logout":["로그아웃 "],"You cannot delete this user while logged in as this user":[""],"You must stop impersonation before deleting a user that has active impersonation session.":[""],"User is disabled":[""],"You impersonated user %s, to cancel the session, click the impersonation icon in the top bar.":[""],"You are already impersonating, click the impersonation icon in the top bar before starting a new impersonation.":[""],"You now act as %s again.":[""],"No active impersonate session.":[""],"Too many tries, please try again in a few minutes.":[""],"Incorrect username or password":["잘못된 사용자 이름 또는 암호 "],"Some imported user account details cannot be saved: %s":[""],"Logged out - See you soon":["로그 아웃했습니다 "],"Email address is missing":["이메일 주소가 누락되었습니다."],"Unable to send email, check server logs for more information":["이메일을 보낼 수 없습니다. 서버 로그에서 자세한 내용을 확인하십시오."],"Email was sent successfully":["이메일을 보냈습니다."],"You have already logged in":[""],"CSRF protection token expired, please log in again":[""],"Unauthorized. You do not have the required permission %s.":[""],"Could not resolve ID.":[""],"Cannot resolve network type for %s":[""],"in %s":["%s"],"%s ago":["%s 전 "],"N/A":["해당 없음 "],"Delete":["삭제 "],"Are you sure?":["정말로 삭제하시겠습니까? "],"Export":["내보내기"],"Export to CSV":["CSV로 내보내기"],"Help":["도움말"],"This user is disabled and won't be able to perform any actions. You can edit the user to enable them again.":[""],"Documentation":["문서 "],"None found":["찾을 수 없습니다."],"Yes":["제공됨"],"No":["아니오 "],"This email was sent from Foreman instance %{title} identified by %{uuid}":[""],"This email was sent from Foreman identified by UUID %{uuid}":[""],"NA":["해당 없음 "],"Missing(ID: %s)":[""],"[empty]":[""],"Template content changed %s":[""],"Password has been changed":[""],"Owner changed to %s":["소유자가 %s로 변경되었습니다 "],"Global status changed from %{from} to %{to}":[""],"%{name} changed from %{label1} to %{label2}":["%{name} 이(가) %{label1}에서 %{label2}로 변경되었습니다 "],"Added %{from} to %{to}":[""],"Removed %{from} to %{to}":[""],"User":["사용자 "],"Hosts":["호스트"],"Audits":["감사 "],"Host details":["호스트 상세 정보 "],"Associated Host":[""],"Example value is <code>DOMAIN\\\\foreman</code>":[""],"Example value is <code>uid=foreman,cn=users,cn=accounts,dc=example,dc=com</code>":[""],"Example value is <code>uid=foreman,dc=example,dc=com</code>":[""],"Example value is <code>CN=Users,DC=example,DC=COM</code>":[""],"Example value is <code>cn=users,cn=accounts,dc=example,dc=com</code>":[""],"Example value is <code>dc=example,dc=com</code>":[""],"Example value is <code>CN=Users,DC=example,DC=com</code>":[""],"Example value is <code>cn=groups,cn=accounts,dc=example,dc=com</code> or <code>cn=ng,cn=compat,dc=example,dc=com</code> if you use netgroups":[""],"Create Autosign Entry":[""],"On":["활성화 "],"Off":["비활성화 "],"Unknown status: %s":[""],"Parameters that would be associated with hosts in this %s":["%s에서 호스트와 연관된 매개 변수 "],"<b>Source:</b> %{type} %{name}":["<b>소스:</b> %{type} %{name}"],"Omit parameter from classification":[""],"Foreman will not send this parameter in classification output.":[""],"Value":["값"],"Paused":["일시정지 "],"Are you sure you want to power %{act} %{vm}?":["%{vm}의 %{act}을(를) 실행하시겠습니까?"],"Are you sure you want to %{act} %{vm}?":["%{vm}의 %{act}을(를) 실행하시겠습니까?"],"Pause":["일시 정지 "],"Resume":["다시 시작 "],"Test Connection":["연결 테스트 "],"Load Datacenters":["데이터 센터 로드 "],"HTTP Proxy":[""],"Power%s":["전원%s"],"Unknown Power State":["알 수 없는 전원 상태 "],"Console":["콘솔"],"Physical (Bridge)":["물리 (브리지)"],"Virtual (NAT)":["가상 (NAT)"],"Please select a cluster":["클러스터를 선택하십시오."],"Resource pool":["리소스 풀"],"Available":[""],"Used":[""],"Host":["호스트 "],"Import as managed Host":[""],"Import as unmanaged Host":[""],"Associate VM":["VM 연결 "],"Associate VM to a Foreman host":["VM을 Foreman 호스트에 연결 "],"Missing permission":[""],"Add to dashboard":["대시보드에 추가"],"Generated at %s":["%s에 생성 "],"Manage":["관리 "],"Save positions":[""],"Reset to default":["기본값으로 다시 설정 "],"Add widgets":["위젯 추가"],"Nothing to add":["추가할 항목 없음"],"Pending changes":["보류 중인 변경 사항 "],"Out of sync":["비동기 "],"No report":["보고서가 없음 "],"Disabled alerts":[""],"Applied|A":["A"],"Applied":["적용됨 "],"Restarted|R":["R"],"Restarted":["다시 시작됨 "],"Failed|F":["F"],"Failed":["실패 "],"Failed Restarts|FR":["FR"],"Failed Restarts":["다시 시작 실패 "],"Skipped|S":["S"],"Skipped":["건너 뛰기 "],"Pending|P":["P"],"Pending":["보류 중 "],"Auto refresh on":["자동 새로 고침 켜기"],"Auto refresh off":["자동 새로 고침 끄기"],"Token expired":[""],"Build errors":[""],"Build in progress":[""],"Expand nested items":["중첩된 항목을 확장 "],"Show all %s children fact values":["모든 %s 자식 정보 값 표시 "],"Show %s fact values for all hosts":[""],"Show full value":["전체 값 표시"],"Facts Values":[""],"contains special characters":[""],"Search may fail or give you wrong results since it contains special characters that are query keywords such as < and >":[""],"Caps lock ON":["Caps Lock 켜짐"],"Change the password":["암호 변경"],"Choose a new file:":[""],"Cancel":["취소 "],"Overwrite":["덮어쓰기"],"Submit":["제출 "],"no value":["값이 없음 "],"Inherit parent (%s)":["부모 상속 (%s)"],"Remove Parameter":["매개 변수 삭제 "],"Change Group":["그룹 변경 "],"Edit Parameters":["매개 변수 편집 "],"Disable Notifications":["통지 비활성화 "],"Enable Notifications":["통지 활성화 "],"Disassociate Hosts":["호스트 연결 해제 "],"Rebuild Config":["구성 다시 빌드"],"Build Hosts":["호스트 빌드 "],"Assign Organization":["조직 지정 "],"Assign Location":["위치 지정 "],"Change Owner":["소유자 변경"],"Change Power State":["전원 상태 변경"],"Delete Hosts":["호스트 삭제 "],"Status":["상태 "],"clear":[""],"Build duration":[""],"Token":["토큰 "],"Domain":["도메인 "],"Realm":["영역 "],"IP Address":["IP 주소"],"IPv6 Address":["IPv6 주소 "],"Comment":["코멘트 "],"MAC Address":["MAC 주소 "],"Architecture":["아키텍처 "],"Operating System":["운영체제"],"PXE Loader":[""],"Host group":["호스트 그룹 "],"Boot time":[""],"Not reported":[""],"Location":["위치 "],"Organization":["조직 "],"Owner":["소유자 "],"Certificate Name":["인증서 이름 "],"Edit":["편집 "],"Edit this host":[""],"Clone":["복제 "],"Clone this host":[""],"Cancel build":["빌드 취소 "],"Cancel build request for this host":["이 호스트의 빌드 요청을 취소 "],"Enable rebuild on next host boot":["다음 호스트 부팅 시 다시 빌드를 활성화 "],"Loading power state ...":["전원 상태 로딩 중..."],"Host audit entries":["호스트 감사 항목 "],"Facts":["정보 "],"Browse host facts":["호스트 정보 검색 "],"Reports":["보고서 "],"Browse host config management reports":["호스트 구성 관리 보고서 검색"],"New UI":[""],"Switch to the new host details UI":[""],"Nest":["중첩 "],"Delete %s?":["%s을(를) 삭제하시겠습니까?"],"This group has nested groups!":["이 그룹에는 중첩된 그룹이 있습니다! "],"Please delete all nested groups before deleting it.":["제거하기 전에 중첩된 모든 그룹을 삭제하십시오. "],"inherit":["상속"],"Reminder: <strong> One host is selected </strong>":[""],"Reminder: <strong> One host is selected </strong> for query filter %{query}":[""],"%s can be changed using bulk action on the All Hosts page":[""],"view last report details":[""],"report already deleted":[""],"Select Action":["작업 선택 "],"%s - The following hosts are about to be changed":["%s - 다음 호스트는 즉시 변경됩니다 "],"Failed restarts":["다시 시작 실패 "],"Config Retrieval":["설정 검색 "],"Runtime":["런타임 "],"Found %{count} reports from the last %{days} days":["지난 %{days}일의 기간에서 %{count}개의 보고서가 발견되었습니다."],"Are you sure you want to delete host %s? This will delete the VM and its disks, and is irreversible. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Are you sure you want to delete host %s? It is irreversible, but VM and its disks will not be deleted. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Are you sure you want to delete host %s? This action is irreversible.":["%s 호스트를 삭제하시겠습니까? 이 작업은 되돌릴 수 없습니다."],"Allocation (GB)":["할당 (GB)"],"None":["없음 "],"Size":["사이즈"],"Full":["전체 "],"remove network interface":["네트워크 인터페이스 삭제 "],"Interface is up":["인터페이스가 작동 중입니다."],"Interface is down":["인터페이스가 작동하지 않습니다."],"Errors occurred, build may fail":["오류가 발생했습니다. 빌드에 실패할 수 있습니다 "],"Edit %s":["%s 편집 "],"Select desired %s proxy":["원하는 %s 프록시 선택"],"*Clear %s proxy*":["*%s 프록시 삭제*"],"Generate new random name. Visit Settings to disable this feature.":[""],"Suggest new":["새 제안 "],"Image":["이미지 "],"Image ID":["이미지 ID"],"Image ID as provided by the compute resource, e.g. ami-..":["컴퓨터 리소스에 의해 지정된 이미지 ID, 예: ami-.."],"Compute Resources":["컴퓨터 리소스 "],"Images":["이미지 "],"Create image":[""],"Active key":[""],"Key used with other compute resource":[""],"Key not connected to any compute resource":[""],"<dl><dt>String</dt> <dd>Everything turns into a string.</dd><dt>Boolean</dt> <dd>Common representation of boolean values are accepted.</dd><dt>Integer</dt> <dd>Integer numbers only, can be negative.</dd><dt>Real</dt> <dd>Accept any numerical input.</dd><dt>Array</dt> <dd>A valid JSON or YAML input, that must evaluate to an array.</dd><dt>Hash</dt> <dd>A valid JSON or YAML input, that must evaluate to an object/map/dict/hash.</dd><dt>YAML</dt> <dd>Any valid YAML input.</dd><dt>JSON</dt> <dd>Any valid JSON input.</dd></dl>":[""],"How values are validated":["값 검증 방법 "],"Unable to save":["저장할 수 없음 "],"Warning!":["경고!"],"Alert":["경고 "],"Notice":["주의 "],"Close":["종료 "],"last %s day":["마지막 %s 일 "],"Full screen":["전체 화면 "],"Puppet class":["Puppet 클래스 "],"Puppet Class":["Puppet 클래스 "],"<b>List</b> A list of the allowed values separated by comma, specified in the Validator rule field. The default value and all input values must then be one of the specified allowed value.<br/><b>Regexp</b> Validates the default value and all input values with the regular expression in the Validator rule field. E.g. <code>[0-9]+\\\\.[0-9]+</code><br/>":[""],"Validation types":["검증 유형 "],"This value is not hidden":[""],"Unhide this value":["이 값 숨기기 취소"],"Hide this value":["이 값 숨기기"],"No entries found":["항목을 찾을 수 없음 "],"Generate":[""],"You are about to unlock a locked template.":["잠긴 템플릿을 잠금 해제합니다."],"This is for every location and organization that uses it.":["해당 템플릿을 사용하는 모든 위치와 조직에서 잠금 해제됩니다."],"It is not recommended to unlock this template, as it is provided by %{vendor} and may be overwritten. Please consider cloning it instead.":["%{vendor}에서 제공하는 템플릿이며 덮어써질 수 있으므로 이 템플릿을 잠금 해제하는 것은 권장하지 않습니다. 복제하는 것이 좋습니다."],"Continue?":["계속하시겠습니까?"],"Unlock":["잠금 해제"],"Lock":["잠금"],"How templates are determined":["템플릿 지정 방법 "],"When editing a template, you must assign a list \\\\\\nof operating systems which this template can be used with. Optionally, you can \\\\\\nrestrict a template to a list of host groups.":[""],"When a Host requests a template (e.g. during provisioning), Foreman \\\\\\nwill select the best match from the available templates of that type, in the \\\\\\nfollowing order:":[""],"Operating system default":["기본값 운영 체제 "],"The final entry, Operating System default, can be set by editing the %s page.":["최종 엔트리, 운영 체제 기본값은 %s 페이지를 편집하여 설정할 수 있습니다. "],"Change Puppet CA":["Puppet CA 변경"],"revoked":["취소됨 "],"valid or pending":["유효 또는 보류 중"],"all":["모두 일치"],"%s minute ago":["%s 분 전 "],"%s day ago":["%s 일 전 "],"%s week ago":["%s 주 전 "],"%s month ago":["%s 개월 전 "],"All Reports":["전체 보고서 "],"Select a period":["기간 선택 "],"Show log messages:":["로그 메세지 표시: "],"All messages":["전체 메세지 "],"Notices, warnings and errors":["주의, 경고 및 오류 "],"Warnings and errors":["경고 및 오류 "],"Errors only":["오류만 "],"Reported by %s":[""],"Show Diff":["다른점 표시 "],"Warning! This will remove %{name} from %{number} user. are you sure?":[""],"Refresh":["새로고침 "],"Certificates":["인증서"],"Autosign":["자동 서명 "],"Import IPv4 subnets":[""],"Expire logs":["로그 만료"],"Actions":["동작 "],"Refresh features":["기능 새로 고침 "],"All":["모두"],"ERROR or FATAL":["오류 또는 치명적 오류"],"WARNING":["경고 "],"INFO or DEBUG":["정보 또는 디버그"],"Protocol":["프로토콜 "],"New Location":["새 위치 "],"New Organization":["새 조직 "],"All users":["전체 사용자 "],"Select users":["사용자 선택 "],"All smart proxies":["모든 스마트 프록시 "],"Select smart proxies":["스마트 프록시 선택 "],"All subnets":["전체 서브넷 "],"Select subnets":["서브넷 선택 "],"All compute resources":["전체 컴퓨터 리소스 "],"Select compute resources":["컴퓨터 리소스 선택 "],"All media":["전체 미디어 "],"Select media":["미디어 선택 "],"All provisioning templates":["모든 프로비저닝 템플릿"],"Select provisioning templates":["프로비저닝 템플릿 선택"],"All partition tables":["모든 파티션 테이블"],"Select partition tables":["파티션 테이블 선택"],"All domains":["전체 도메인 "],"Select domains":["도메인 선택 "],"All realms":["전체 영역 "],"Select realms":["영역 선택 "],"All environments":["전체 환경 "],"Select environments":["환경 선택 "],"All host groups":["전체 호스트 그룹 "],"Select host groups":["호스트 그룹 선택 "],"Not relevant for snippet":["조각 모음과 관련이 없습니다 "],"Default templates are automatically added to new organizations and locations":["기본 템플릿이 새 조직과 위치에 자동으로 추가됩니다."],"This template is locked. You may only change the\\\\\\n associations. Please %s it to customize.":[""],"clone":["복제 "],"Template input":["템플릿 입력"],"remove template input":["템플릿 입력 삭제"],"Plain":[""],"Search":["검색 "],"Date":["날짜 "],"Resource":["리소스 "],"Impersonate":[""],"Create RSS notifications":[""],"Clean up StoredValues":[""],"Render report %s":[""],"Render report template":[""],":foreman_url is not set, please configure in the Foreman Web UI (Administer -> Settings -> General)":[":foreman_url이 설정되어 있지 않습니다. Foreman 웹 UI를 구성하십시오(관리자 -> 설정 -> 일반)."],"Must specify a user with email enabled":["이메일이 활성화된 사용자를 지정해야 합니다 "],"Audit summary":["감사 요약"],"Must specify a valid user with email enabled":["이메일이 활성화된 유효한 사용자를 지정해야 합니다 "],"Configuration Management Summary Report - F:%{failed} R:%{restarted} S:%{skipped} A:%{applied} FR:%{failed_restarts} T:%{total}":[""],"Configuration Management Error on %s":[""],"Host %s is built":["%s 호스트가 빌드되었습니다."],"Result of report %s":[""],"Welcome to Foreman":["Foreman에 오신 것을 환영합니다 "],"Foreman test email":["Foreman 테스트 이메일"],"Error while connecting to '%{name}' LDAP server at '%{url}' during authentication":[""],"Cannot create LDAP configuration for %s without dedicated service account":["전용 서비스 계정없이 %s의 LDAP 설정을 생성할 수 없습니다 "],"Error during LDAP connection %{name} using login %{login}: %{error}":[""],"Test connection to LDAP server was successful.":["LDAP 서버에 대한 연결 테스트가 성공했습니다."],"Unable to connect to LDAP server":["LDAP 서버에 연결할 수 없습니다."],"invalid LDAP filter syntax":["잘못된 LDAP 필터 구문 "],"%s is an unknown attribute":["%s은(는) 알 수 없는 속성입니다 "],"Libvirt, oVirt and OpenStack":[""],"must provide a provider":["공급자를 지정해야 합니다 "],"unknown provider":["알 수 없는 공급자 "],"%s console is not supported at this time":["%s 콘솔은 아직 지원되지 않습니다 "],"Not implemented for %s":["%s에 대해 구현되지 않습니다 "],"Not implemented":["구현되지 않습니다"],"cannot be changed":["변경할 수 없습니다 "],"Invalid tags, must be an array of maps with key and value properties":[""],"selected image does not exist":[""],"console is not available at this time because the instance is powered off":[""],"Unable to access key":["액세스할 수 없음 "],"Invalid Google JSON key. Please verify client email & private key options are present":[""],"Certificate key is not a valid JSON":[""],"no storage pool available on hypervisor":[""],"Unable to find template %s":["템플릿 %s을 찾을 수 없습니다 "],"VM is not running!":["VM이 실행되고 있지 않습니다! "],"Unable to change VM display listen address, make sure the display is not attached to localhost only":["VM 디스플레이의 수신 주소를 변경할 수 없습니다. 디스플레이가 로컬 호스트에만 할당되지 않았는지 확인합니다 "],"Unable to connect to libvirt due to: %s. Please make sure your libvirt compute resource is reachable and that you have appropriate access permissions.":[""],"At least one volume must be specified for image-based provisioning.":["이미지 기반 프로비저닝에 대해 최소 하나의 볼륨을 지정해야 합니다. "],"Please specify volume size. You may optionally use suffix 'G' to specify volume size in gigabytes.":["볼륨 크기를 지정하십시오. 볼륨 크기를 기가 바이트 단위로 지정하려면 옵션으로 접미사 'G'를 사용할 수 있습니다. "],"must end with /v2 or /v3":[""],"No matching server groups found":[""],"Hint data is missing":[""],"Failed to deploy vm %{name}, fault: %{e}":[""],"HTTPS URL is required for API access":[""],"Datacenter was not found":[""],"Cluster ID is required to list available networks":["사용 가능한 네트워크를 나열하려면 클러스터 ID가 필요합니다 "],"VM volume attributes are not set properly":[""],"The remote system presented a public key signed by an unidentified certificate authority. If you are sure the remote system is authentic, go to the compute resource edit page, press the 'Test Connection' or 'Load Datacenters' button and submit":["원격 시스템은 미확인 인증 기관에서 서명된 공개 키를 표시합니다. 원격 시스템이 인증되어 있는지를 확인할 수 있는 경우 컴퓨터 리소스 편집 페이지로 가서 '연결 테스트' 또는 '데이터센터 로드' 버튼을 클릭하여 제출합니다 "],"Failed to create X509 certificate, error: %s":["X509 인증서 생성에 실패했습니다. 오류: %s"],"not supported by this compute resource":[""],"VNC":[""],"VMRC":[""],"Automatic":["자동"],"EFI":[""],"Persistent":[""],"Independent - Persistent":[""],"Independent - Nonpersistent":[""],"Harddisk":[""],"CD-ROM":[""],"Network":["네트워크"],"Floppy":[""],"Default":["기본값 "],"Foreman could not find a required vSphere resource. Check if Foreman has the required permissions and the resource exists. Reason: %s":[""],"The console is not available because the VM is not powered on":[""],"Could not find network %s on VMWare compute resource":[""],"The remote system presented a public key with hash %s but we're expecting a different hash. If you are sure the remote system is authentic, go to the compute resource edit page, press the 'Test Connection' or 'Load Datacenters' button and submit":["원격 시스템은 해시 %s와 함께 공개키를 표시하지만 해시는 다른 것을으로 예상합니다. 원격 시스템이 인증되어 있는지를 확인할 수 있는 경우 컴퓨터 리소스 편집 페이지로 가서 '연결 테스트' 또는 '데이터센터 로드' 버튼을 클릭하여 제출합니다 "],"Can not load datacenters due to an incorrect user name or password.":[""],"[redacted]":[""],"Audit":["감사 "],"You don't have permission %{name} with attributes that you have specified or you don't have access to specified organizations or locations":[""],"%s is not a valid DNS record type":[""],"Adding would cause a cycle!":["추가하면 사이클이 발생합니다!"],"%{record} is used by %{what}":["%{record}은(는) %{what}에 의해 사용되고 있습니다 "],"%{record} is being used by a hidden %{what} resource":["%{record}은(는) 숨겨진 %{what} 리소스에 사용 중입니다."],"Cannot find user %s when switching context":["문맥으로 전환할 때 사용자 %s을(를) 검색할 수 없음 "],"Could not find %{association} with name: %{name}":[""],"Puppet":["Puppet"],"Puppet Proxy":[""],"Use the Puppetserver configured on this Smart Proxy":[""],"Puppet proxy ID":["Puppet 프록시 ID"],"Puppet CA Proxy":[""],"Use the Puppetserver CA configured on this Smart Proxy":[""],"Puppet CA proxy ID":["Puppet CA 프록시 ID"],"Owner type needs to be one of the following: %s":["소유자 유형은 다음 중 하나이어야 합니다: %s"],"does not belong into host's organization":[""],"does not belong into host's location":[""],"There is no owner with id %d and type %s":[""],"If owner type is specified, owner must be specified too.":[""],"Unknown power management support - can't continue":["알 수 없는 전력 관리 지원 - 계속 진행할 수 없음 "],"string":["문자열"],"boolean":["부울 "],"integer":["정수 "],"real":["실제 "],"array":["어레이 "],"hash":["해시"],"yaml":["yaml"],"json":["json"],"invalid":["유효하지 않음 "],"is invalid %s":["잘못된 %s입니다 "],"%{task} task failed with the following error: %{e}":["%{task} 작업은 다음과 같은 오류로 인해 실패했습니다: %{e}"],"Failed to perform rollback on %{task} - %{e}":["%{task}에서 롤백 실행에 실패했습니다 - %{e}"],"invalid method %s":["잘못된 방식 %s"],"Receiving vm data for host '%{host}' from used compute resource '%{compute_resource}' failed: '%{exception}'.":[""],"Render user data template for %s":["%s의 사용자 데이터 템플릿 렌더링 "],"Set up compute instance %s":["컴퓨터 인스턴스 %s 설정 "],"Acquire IP addresses for %s":[""],"Query instance details for %s":["%s의 쿼리 인스턴스 상세 정보 "],"Set IP addresses for %s":[""],"Power up compute instance %s":["컴퓨터 인스턴스 %s의 파워 업 "],"Compute resource update for %s":["%s의 컴퓨터 리소스 업데이트 "],"Removing compute instance %s":["컴퓨터 인스턴스 %s 삭제 중 "],"Failed to find compute attributes, please check if VM %s was deleted":[""],"Failed to create a compute %{compute_resource} instance %{name}: %{message}\\n ":["컴퓨팅 %{compute_resource} 인스턴스 %{name}을(를) 생성하지 못했습니다: %{message}\\n "],"%{image} needs user data, but %{os_link} is not associated to any provisioning template of the kind user_data. Please associate it with a suitable template or uncheck 'User data' for %{compute_resource_image_link}.":["%{image}에는 사용자 데이터가 필요하지만 %{os_link}이(가) user_data 유형의 프로비저닝 템플릿에 연결되어 있지 않습니다. 적합한 템플릿에 연결하거나 %{compute_resource_image_link}에 대해 '사용자 데이터' 선택을 취소하십시오."],"Failed to remove certificates for %{name}: %{e}":["%{name}의 인증서 삭제에 실패했습니다: %{e}"],"Failed to acquire IP addresses from compute resource for %s":[""],"failed to save %s":["%s 저장 실패 "],"Failed to get IP for %{name}: %{e}":["%{name}의 IP를 얻는데 실패했습니다: %{e}"],"Failed to set IPs via IPAM for %{name}: %{e}":[""],"Failed to set IP for %{name}: %{e}":[""],"Failed to destroy a compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 삭제에 실패했습니다: %{e}"],"Failed to power up a compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 파워 업에 실패했습니다: %{e}"],"Failed to stop compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 중지에 실패했습니다: %{e}"],"Failed to update a compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 업데이트에 실패했습니다: %{e}"],"Failed to undo update compute %{compute_resource} instance %{name}: %{e}":["컴퓨팅 %{compute_resource} 인스턴스 %{name} 업데이트 취소에 실패했습니다: %{e}"],"Selected image does not belong to %s":["선택된 이미지는 %s에 속해 있지 않습니다 "],"Could not find virtual machine network interface matching %s":["%s과(와) 일치하는 가상 머신 네트워크 인터페이스를 찾을 수 없습니다."],"Connection to compute resource timed out":[""],"Connection to compute resource refused":[""],"Compute resource destination unreachable":[""],"DHCP":["DHCP"],"DHCP not supported for this NIC":["DHCP는 NIC에 대해 지원되지 않습니다 "],"Create DHCP Settings for %s":["%s의 DHCP 설정 생성 "],"Remove DHCP Settings for %s":["%s의 DHCP 설정 삭제 "],"DHCP conflicts removal for %s":["%s의 DHCP 충돌 삭제 "],"DHCP records %s already exists":["DHCP 기록 %s은(는) 이미 존재합니다 "],"DNS":["DNS"],"Create %{type} for %{host}":[""],"Remove %{type} for %{host}":[""],"Remove conflicting %{type} for %{host}":[""],"%{type} %{conflicts} already exists":[""],"Error connecting to system DNS server(s) - check /etc/resolv.conf":["시스템 DNS 서버에 연결하는 도중 오류가 발생했습니다. - /etc/resolv.conf를 확인하십시오."],"Error connecting to '%{domain}' domain DNS servers: %{servers} - check query_local_nameservers and dns_timeout settings":[""],"This IP address has already been reserved in External IPAM":[""],"Some interfaces are invalid":["일부 인터페이스가 유효하지 않습니다."],"Creating IPv4 in External IPAM for %s":[""],"Creating IPv6 in External IPAM for %s":[""],"Removing IPv4 in External IPAM for %s":[""],"Removing IPv6 in External IPAM for %s":[""],"Failed to initialize the PuppetCA proxy: %s":["PuppetCA 프록시 초기화에 실패했습니다: %s"],"Reset PuppetCA certname for %s":[""],"Cleanup PuppetCA certificates for %s":[""],"Enable PuppetCA autosigning for %s":[""],"Delete PuppetCA certificates for %s":["%s의 PuppetCA 인증서 삭제 "],"Disable PuppetCA autosigning for %s":[""],"Failed to initialize the realm proxy: %s":["영역 프록시 초기화에 실패했습니다: %s"],"Realm proxy did not return a one-time password":["영역 프록시는 일회용 암호를 반환하지 않습니다 "],"Failed to create %{name}'s realm entry: %{e}":["%{name}'의 영역 항목 생성에 실패했습니다: %{e}"],"Create realm entry for %s":["%s의 영역 항목 생성 "],"Update realm entry for %s":["%s의 영역 항목 업데이트 "],"Delete realm entry for %s":["%s의 영역 항목 삭제 "],"Prepare post installation script for %s":["%s의 설치 후 스크립트 준비 "],"Wait for %s to come online":["온라인 상에 있을 때 까지 %s 동안 대기 "],"Configure instance %s via SSH":["SSH를 통해 인스턴스 %s 설정 "],"Unable to find proper authentication method":["올바른 인증 방식을 찾을 수 없습니다 "],"Failed to login via SSH to %{name}: %{e}":[" SSH를 통해 %{name}에 로그인 실패했습니다: %{e}"],"Provision script had a non zero exit":["프로비저닝 스크립트에 0이 아닌 종료가 있습니다."],"Failed to launch script on %{name}: %{e}":["%{name} 상의 스트립트 시작에 실패했습니다: %{e}"],"No finish templates were found for this host, make sure you define at least one in your %s settings":["이 호스트의 마지막 템플릿을 찾을 수 없습니다. %s 설정에 적어도 하나의 템플릿이 지정되어 있는지 확인합니다 "],"TFTP":["TFTP"],"Unable to render %{kind} template '%{name}': %{e}":[""],"Template '%s' was not found":[""],"Unable to render '%{name}' template: %{e}":[""],"Failed to fetch boot files":["부팅 파일을 가져오는데 실패했습니다 "],"No %{template_kind} templates were found for this host, make sure you define at least one in your %{os} settings or change PXE loader":[""],"Deploy TFTP %{kind} config for %{host}":[""],"Fetch TFTP boot files for %s":["%s의 TFTP 부팅 파일 가져오기 "],"Delete TFTP %{kind} config for %{host}":[""],"has already been taken":["이미 사용되고 있습니다"],"Please ensure the following parameters name are unique":["다음 매개 변수 이름이 고유한 것인지 확인하십시오 "],"'%{loader}' is not one of %{loaders}":[""],"Invalid %{assoc} selection, you must select at least one of yours and have '%{perm}' permission.":[""],"cannot be used, please choose another":[""],"is not valid":["유효하지 않습니다."],"must be one of [ %s ]":["[ %s ] 중 하나여야 합니다 "],"Unsupported report status format":["지원되지 않는 보고서 상태 형식 "],"invalid host list":["잘못된 호스트 목록 "],"Modified":["수정됨"],"DNS Proxy":["DNS 프록시 "],"DNS proxy to use within this domain for managing A records, note that PTR records are managed via Subnet DNS proxy":["A 레코드를 관리하기 위해 이 도메인에서 사용되는 DNS 프록시입니다. PTR 레코드는 서브넷 DNS 프록시를 통해 관리됨에 유의합니다 "],"DNS proxy ID to use within this domain":[""],"LDAP error - %{message}":["LDAP 오류 - %{message}"],"is not found in the authentication source":["인증 소스에서 찾을 수 없습니다 "],"is not permitted":["권한 없음 "],"Domain Users is a special group in AD. Unfortunately, we cannot obtain membership information from a LDAP search and therefore sync it.":[""],"invalid search query: %s":["잘못된 검색 쿼리: %s"],"filter for %s role":["%s 역할 필터 "],"(Miscellaneous)":["(기타)"],"must be of same resource type (%{types}) - Role (%{role})":[""],"You must select at least one permission":["최소 하나의 권한을 선택해야 합니다 "],"You can't assign organizations to this resource":["이 리소스에 조직을 할당할 수 없습니다 "],"You can't assign locations to this resource":["이 리소스에 위치를 할당할 수 없습니다 "],"is locked for user modifications.":[""],"host must have one primary interface":["호스트에 기본 인터페이스가 1개 필요합니다."],"managed host must have one provision interface":["관리되는 호스트에 프로비저닝 인터페이스가 1개 필요합니다."],"some interfaces are invalid":["일부 인터페이스가 유효하지 않습니다."],"invalid time range":["잘못된 시간 범위 "],"should be 8 characters or more":["8 자 이상이어야 합니다 "],"should not be blank - consider setting a global or host group default":["비워둘 수 없습니다 - 글로벌 또는 호스트 그룹 기본값을 설정해야 합니다 "],"can't be blank unless a custom partition has been defined":["사용자 정의 파티션을 정의하지 않으면 비워둘 수 없습니다 "],"is unknown":["알 수 없음 "],"must belong to host's operating system":[""],"Network Based":["네트워크 기반 "],"Image Based":["이미지 기반 "],"host":["호스트"],"hostgroup":["호스트그룹 "],"global setting":[""],"An interface marked as provision is missing":[""],"An interface marked as primary is missing":[""],"No BMC NIC available for host %s":[""],"There are orchestration modules with methods for configuration rebuild that have identical name: '%s'":["구성 다시 빌드를 위한 메서드가 포함된 이름이 동일한 오케스트레이션 모듈이 여러 개 있습니다: '%s'"],"%{value} does not belong to %{os} operating system":["%{value}은(는) %{os} 운영 체제에 속해 있지 않습니다 "],"is an unsupported provisioning method, available: %s":[""],"can't be updated after host is provisioned":["호스트를 프로비저닝한 후 업데이트할 수 없습니다 "],"must not include periods":["마침표를 포함할 수 없습니다 "],"with id %{object_id} doesn't exist or is not assigned to proper organization and/or location":[""],"Pending installation":["보류 중인 설치"],"Installation error":[""],"Installed":["설치됨 "],"Unknown build status":["알 수 없는 빌드 상태"],"Configuration":["설정"],"Alerts disabled":["경고 비활성화 "],"No reports":["보고서가 없음 "],"No changes":["변경 사항 없음 "],"Global":["글로벌"],"Default value":["기본값 "],"must be of type Subnet::Ipv4.":[""],"must be of type Subnet::Ipv6.":[""],"is not valid.":[""],"could not be found in %s":["%s에 없습니다."],"regexp":["정규식 "],"list":["목록"],"invalid path":["잘못된 경로 "],"can only be set for array, hash, json or yaml":[""],"can only be set for arrays that have merge_overrides set to true":["merge_overrides가 True로 설정된 배열에만 설정할 수 있습니다 "],"can only be set when merge overrides is set":["병합 덮어쓰기가 설정된 경우에만 설정할 수 있습니다."],"%{match} does not match an existing host":["%{match}은(는) 기존 호스트와 일치하지 않습니다 "],"%{match} does not match an existing host group":["%{match}은(는) 기존 호스트 그룹과 일치하지 않습니다 "],"%{key} does not exist in order field":[""],"Subscribe to my hosts":[""],"Subscribe to all hosts":[""],"Daily":["매일"],"Weekly":["매주"],"Monthly":["매달"],"Subscribe":["등록 "],"does not appear to be a valid nfs mount path":["유효한 NFS 마운트 경로가 표시되지 않습니다 "],"%{record} is used by host in build mode %{what}":["%{record}은(는) 빌드 모드의 호스트 %{what}에 의해 사용되고 있습니다 "],"Unnamed":[""],"can't find domain with this id":["이 ID의 도메인을 찾을 수 없습니다."],"can't delete primary interface of managed host":["관리되는 호스트의 기본 인터페이스를 삭제할 수 없습니다."],"can't delete provision interface of managed host":["관리되는 호스트의 프로비저닝 인터페이스를 삭제할 수 없습니다."],"interface is already set on the host":[""],"must be a unicast MAC address":[""],"can't be changed once the interface is saved":[""],"can't be set for this interface because it's provided by the compute resource":[""],"Unable to find a proxy with BMC feature":["BMC 기능이 있는 프록시를 찾을 수 없습니다 "],"BMC":["BMC"],"There is no proxy with BMC feature set up. Associate a BMC feature with a subnet.":[""],"Bond":["본딩 "],"Bridge":["브릿지"],"subnet boot mode is not %s":["서브넷 부팅 모드가 %s이(가) 아닙니다."],"Operating System version is required":["운영 체제 버전이 필요합니다 "],"Operating system version already exists":["운영 체제 버전이 이미 있습니다."],"Please provide a medium provider. It can be found as @medium_provider in templates, or Foreman::Plugin.medium_providers_registry.find_provider(host)":[""],"HTTP UEFI boot requires proxy with httpboot feature":[""],"Attempting to construct an operating system image filename but %s cannot be built from an image":["운영 체제 이미지 파일 이름을 생성하려 했지만 %s은 이미지에서 만들 수 없습니다 "],"Operating System has no family, can't load PXE files":[""],"Function not available for %s":["%s에 사용할 수 없는 기능"],"auxiliary field":[""],"global":["글로벌"],"domain":["도메인 "],"host group":["호스트 그룹"],"location":["위치 "],"You do not have permission to %s this location parameter":["위치 매개 변수 %s에 대한 권한이 없습니다"],"organization":["조직 "],"You do not have permission to %s this organization parameter":["조직 매개 변수 %s에 대한 권한이 없습니다 "],"operating system":["운영 체제"],"subnet":[""],"Must provide template kind":["템플릿 종류를 지정해야 합니다 "],"Must provide an operating system":[""],"No TFTP proxies defined, can't continue":["TFTP 프록시가 지정되어 있지 않습니다, 계속 진행할 수 없습니다 "],"Could not find a Configuration Template with the name \\\"%s\\\", please create one.":[""],"PXE files for templates %s have been deployed to all Smart Proxies":[""],"There was an error creating the PXE file: %s":[""],"can't assign operating system to Registration template":[""],"specified template \\\"%s\\\" kind was not found":[""],"Realm proxy":["영역 프록시 "],"Realm proxy to use within this realm":["이 영역에 사용할 영역 프록시 "],"Proxy ID to use within this realm":[""],"Input %s: ":[""],"Unable to create the default role.":[""],"One or more of the associated filters are invalid which prevented the role to be saved":[""],"Unable to submit role: Problem with associated filter %s":[""],"Cannot delete built-in role":[""],"This role is locked from being modified by users.":[""],"some permissions were not found: %s":[""],"must be boolean":["부울이어야 합니다 "],"must be integer":["정수여야 합니다 "],"must be an array":["어레이여야 합니다 "],"Parsing a hash from a string is not supported":[""],"Parsing settings type '%s' from a string is not defined":[""],"Error parsing value for setting '%(name)s': %(error)s":[""],"Host owner is invalid":[""],"is invalid: %s":["잘못됨: %s"],"is not allowed to change":["변경할 수 없음 "],"Only one declaration of a proxy is allowed":["하나의 프록시만 지정할 수 있습니다 "],"An invalid response was received while requesting available features from this proxy":[""],"Unable to communicate with the proxy: %s":["프록시와 통신할 수 없습니다: %s"],"HTTP boot requires proxy with httpboot feature and http_port exposed setting":[""],"HTTPS boot requires proxy with httpboot feature and https_port exposed setting":[""],"Features \\\"%s\\\" in this proxy are not recognized by Foreman. If these features come from a Smart Proxy plugin, make sure Foreman has the plugin installed too.":[""],"No features found on this proxy, please make sure you enable at least one feature":["이 프록시의 기능이 없습니다. 적어도 하나의 기능을 활성화하고 있는지 확인하십시오"],"Please check the proxy is configured and running on the host.":["프록시가 설정되어 호스트에서 실행되고 있는지 확인하십시오. "],"must be in OpenSSH public key format":[""],"should be a single line":[""],"could not be generated":[""],"could not be calculated":[""],"IPv4":["IPv4"],"IPv6":["IPv6"],"Static":["고정 "],"DHCP Proxy":["DHCP 프록시 "],"DHCP Proxy to use within this subnet":["이 서브넷에서 사용할 DHCP 프록시 "],"DHCP Proxy ID to use within this subnet":[""],"TFTP Proxy":["TFTP 프록시 "],"TFTP Proxy ID to use within this subnet":[""],"TFTP Proxy to use within this subnet":["이 서브넷에서 사용할 TFTP 프록시 "],"HTTPBoot":[""],"HTTPBoot Proxy":[""],"HTTPBoot Proxy ID to use within this subnet":[""],"HTTPBoot Proxy to use within this subnet":[""],"External IPAM":[""],"External IPAM Proxy ID to use within this subnet":[""],"External IPAM Proxy to use within this subnet":[""],"Reverse DNS Proxy":["역방향 DNS 프록시"],"DNS Proxy ID to use within this subnet":[""],"DNS Proxy to use within this subnet for managing PTR records, note that A and AAAA records are managed via Domain DNS proxy":[""],"Templates":["템플릿 "],"Template Proxy":[""],"Template HTTP(S) Proxy ID to use within this subnet":[""],"Template HTTP(S) Proxy to use within this subnet to allow access templating endpoint from isolated networks":[""],"BMC Proxy":[""],"BMC Proxy ID to use within this subnet":[""],"BMC Proxy to use within this subnet for management access":[""],"not supported by this protocol":[""],"There must be at least one Smart Proxy present with an External IPAM plugin installed and configured":[""],"A Smart Proxy with an External IPAM feature enabled must be selected in the Proxies tab.":[""],"Subnet not found in the configured External IPAM instance":[""],"Group not found in the configured External IPAM instance":[""],"Subnet not found in the specified External IPAM group":[""],"Unsupported IPAM mode for %s":[""],"must be specified if to is defined":["대상 위치가 지정되어 있는 경우 지정해야 합니다 "],"must be specified if from is defined":["원래 위치가 지정되어 있는 경우 지정해야 합니다 "],"does not belong to subnet":["서브넷에 속해 있지 않습니다 "],"can't be bigger than to range":["범위보다 클 수 없습니다 "],"can't be updated after subnet is saved":[""],"unknown network_type":[""],"Prefix length must be /64 or less to use EUI-64":[""],"Missing a permission to edit parent %s":[""],"Duplicated inputs detected: %{duplicated_inputs}":["중복된 입력이 감지되었습니다: %{duplicated_inputs}"],"This template is locked and may not be removed.":["템플릿이 잠겨 있어 삭제할 수 없습니다. "],"You are not authorized to lock templates.":["템플릿을 잠글 권한이 없습니다."],"You are not authorized to make a template default.":["템플릿을 기본 템플릿으로 설정할 권한이 없습니다."],"This template is locked. Please clone it to a new template to customize.":["이 템플릿은 잠겨 있습니다. 사용자 정의하려면 이를 새 템플릿에 복제하십시오. "],"Cannot add audit comment to a locked template.":[""],"Cannot delete template input as template is locked.":[""],"PXELinux template":[""],"PXEGrub template":[""],"PXEGrub2 template":[""],"iPXE template":[""],"Provisioning template":["프로비저닝 템플릿"],"Finish template":[""],"Script template":[""],"User data template":[""],"ZTP PXE template":[""],"POAP PXE template":[""],"Cloud-init template":[""],"Host initial configuration template":[""],"Registration template":[""],"Discovery Kexec":[""],"Boot disk":["부팅 디스크 "],"Used when PXELinux loader is set, loads pxelinux.0 which loads content generated by this template.":[""],"Used when Grub2 loader is set, loads grub/bootx64.efi which loads content generated by this template.":[""],"Used when PXELinux loader is set, loads grub/grubx64.efi which loads content generated by this template.":[""],"Used in iPXE environments.":[""],"Template for OS installer, for example kickstart, preseed or jumpstart. Depends on the operating system.":[""],"Post-install script for preseed-based or cloud instance. Connection is made via SSH, credentials or key must exist and inventory IP address must match. Only used when 'user data' is not set.":[""],"An arbitrary script, must be manually downloaded using wget/curl.":[""],"Template with seed data for virtual or cloud instances when 'user data' flag is set, typically cloud-init or ignition format.":[""],"Provisioning Junos devices (Junos 12.2+).":[""],"Provisioning for switches running NX-OS.":[""],"Template for cloud-init unattended endpoint.":[""],"Contains the instructions in form of a bash script for the initial host configuration, after the host is registered in Foreman":[""],"already exists":["이미 존재합니다 "],"Anonymous admin user %s is missing, run foreman-rake db:seed":["익명의 관리자 %s가 없습니다. foreman-rake db:seed를 실행합니다 "],"Incorrect password":["비밀번호가 틀립니다."],"A user group already exists with this name":["이 이름으로된 사용 그룹이 이미 존재합니다 "],"Can't delete the last admin account":["마지막 관리 계정을 삭제할 수 없음 "],"cannot be removed from the last admin account":["마지막 관리 계정에서 삭제할 수 없음 "],"Can't delete internal admin account":["내부 관리 계정을 삭제할 수 없음 "],"cannot be removed from an internal protected account":["내부적으로 보안된 계정에서 삭제할 수 없습니다 "],"cannot be changed on an internal protected account":["내부적으로 보안된 계정을 변경할 수 없습니다 "],"you can't assign some of roles you selected":["선택한 역할의 일부를 할당할 수 없습니다 "],"you can't change administrator flag":["관리자 플래그를 변경할 수 없습니다 "],"cannot be changed by a non-admin user":["관리자가 아닌 사용자는 변경할 수 없습니다."],"default locations need to be user locations first":["기본값 위치는 먼저 사용자 위치가 되어야 합니다 "],"default organizations need to be user organizations first":["기본값 조직은 먼저 사용자 조직이 되어야 합니다 "],"It is not possible to change external users login":[""],"You do not have permission to edit the login":[""],"It is not possible to disable yourself":[""],"has this role already":["이미 이 역할이 있습니다 "],"is already used by a user account":["사용자 계정에 의해 이미 사용되고 있습니다 "],"Can't delete the last admin user group":["마지막 관리 사용자 그룹을 삭제할 수 없음 "],"admin flag can only be modified by admins":[""],"cannot contain itself as member":[""],"Unsupported search operators :and / :or":[""],"%{id} plugin requires Foreman %{matcher} but current is %{current}":["%{id} 플러그인에는 Foreman %{matcher}가 필요하지만 현재는 %{current}입니다 "],"%{id} plugin requires the %{plugin_name} plugin, not found":["%{id} 플러그인에는 %{plugin_name} 플러그인이 필요하지만 찾을 수 없습니다 "],"%{id} plugin requires the %{plugin_name} plugin %{matcher} but current is %{plugin_version}":["%{id} 플러그인에는 %{plugin_name} 플러그인 %{matcher}가 필요하지만 현재는 %{plugin_version}입니다"],"Cannot register compute resource, wrong type supplied":[""],"Could not create role '%{name}': %{message}":[""],"Cannot continue because some permissions were not found, please run rake db:seed and retry":[""],"Could not add permissions to Manager and Viewer roles: %s":[""],"Could not add permissions to Manager role: %s":[""],"Could not add permissions to Viewer role: %s":[""],"Could not add permissions to Organization admin role: %s":[""],"Could not extend role '%{name}': %{message}":[""],"General":["일반 "],"Setting '%s' is already defined, please avoid collisions":[""],"Setting '%s' has an invalid type definition. Please use a valid type.":[""],"Authentication":["보안 및 인증"],"Foreman will use OAuth for API authorization":["Foreman은 API 인증에 OAuth를 사용합니다 "],"OAuth active":["OAuth 활성"],"OAuth consumer key":["인증 컨슈머 키 "],"OAuth consumer secret":["OAuth 컨슈머 기밀 "],"When enabled, Foreman will map users by username in request-header. If this is disabled, OAuth requests will have admin rights.":[""],"OAuth map users":["OAuth 맵 사용자"],"Foreman will block user logins from an IP address after this number of failed login attempts for 5 minutes. Set to 0 to disable bruteforce protection":[""],"Failed login attempts limit":[""],"Only known Smart Proxies may access features that use Smart Proxy authentication":["알려진 스마트 프록시만 스마트 프록시 인증을 사용하는 기능에 액세스할 수 있습니다."],"Restrict registered smart proxies":["등록된 스마트 프록시 제한"],"List of hostnames, IPv4, IPv6 addresses or subnets to be trusted in addition to Smart Proxies for access to fact/report importers and ENC output":[""],"Trusted hosts":[""],"SSL Certificate path that Foreman would use to communicate with its proxies":["Foreman이 프록시와 통신하는데 사용할 SSL 인증서 경로 "],"SSL certificate":["SSL 인증서"],"SSL CA file path that Foreman will use to communicate with its proxies":[""],"SSL CA file":["SSL CA 파일"],"SSL Private Key path that Foreman will use to communicate with its proxies":[""],"SSL private key":["SSL 비공개 키"],"Environment variable containing the subject DN from a client SSL certificate":["클라이언트 SSL 인증서에서 주체 DN가 포함되어 있는 환경 변수 "],"SSL client DN env":["SSL 클라이언트 DN 환경"],"Environment variable containing the verification status of a client SSL certificate":["클라이언트 SSL 인증서의 유효성 검사 상태가 들어 있는 환경 변수 "],"SSL client verify env":["SSL 클라이언트 확인 환경"],"Environment variable containing a client's SSL certificate":["클라이언트의 SSL 인증서가 포함되어 있는 환경 변수"],"SSL client cert env":["SSL 클라이언트 인증서 환경"],"SSL CA file path that will be used in templates (to verify the connection to Foreman)":[""],"Server CA file":[""],"Private key file path that Foreman will use to encrypt websockets":[""],"Websockets SSL key":["Websocket SSL 키"],"Certificate path that Foreman will use to encrypt websockets":[""],"Websockets SSL certificate":["Websocket SSL 인증서"],"VNC/SPICE websocket proxy console access encryption (websockets_ssl_key/cert setting required)":["VNC/SPICE websocket 프록시 콘솔 액세스 암호화(websockets_ssl_key/cert 설정 필요)"],"Websockets encryption":["Websocket 암호화"],"Unable to turn on websockets_encrypt, either websockets_ssl_key or websockets_ssl_cert is missing":["websockets_encrypt를 켤 수 없습니다. websockets_ssl_key 또는 websockets_ssl_cert가 누락되었습니다."],"Unable to unset websockets_ssl_key when websockets_encrypt is on":["websockets_encrypt가 켜져 있는 경우 websockets_ssl_key를 설정 해제할 수 없습니다."],"Unable to unset websockets_ssl_cert when websockets_encrypt is on":["websockets_encrypt가 켜져 있는 경우 websockets_ssl_cert를 설정 해제할 수 없습니다."],"Redirect your users to this url on logout (authorize_login_delegation should also be enabled)":["로그 아웃 시 사용자를 이 URL로 방향 전환합니다 (authorize_login_delegation도 활성화해야 합니다) "],"Login delegation logout URL":["로그인 권한 로그아웃 URL"],"Name of the external auth source where unknown externally authentication users (see authorize_login_delegation) should be created. Empty means no autocreation.":[""],"Authorize login delegation auth source user autocreate":["로그인 권한 승인 인증 소스 사용자 자동 생성"],"Authorize login delegation with REMOTE_USER HTTP header":[""],"Authorize login delegation":["로그인 권한 승인"],"Authorize login delegation with REMOTE_USER HTTP header for API calls too":[""],"Authorize login delegation API":["로그인 권한 승인 API"],"Log out idle users after a certain number of minutes":["일정 시간 (분)이 지나면 유휴 사용자는 로그아웃됩니다"],"Idle timeout":["유휴 시간 초과"],"Password hashing algorithm. A password change is needed effect existing passwords.":[""],"Password hashing algorithm":[""],"SHA1":[""],"BCrypt":[""],"PBKDF2 SHA1":[""],"Cost value of bcrypt password hash function for internal auth-sources (4-30). A higher value is safer but verification is slower, particularly for stateless API calls and UI logins. A password change is needed effect existing passwords.":[""],"BCrypt password cost":[""],"Cost value of PBKDF2 password hash function for internal auth-sources. A higher value is safer but verification is slower, particularly for stateless API calls and UI logins. A password change is needed effect existing passwords.":[""],"PBKDF2 password cost":[""],"Permits access to BMC interface passwords through ENC YAML output and in templates":[""],"BMC credentials access":[""],"OpenID Connect JSON Web Key Set(JWKS) URL. Typically https://keycloak.example.com/auth/realms/<realm name>/protocol/openid-connect/certs when using Keycloak as an OpenID provider":[""],"OIDC JWKs URL":[""],"Name of the OpenID Connect Audience that is being used for Authentication. In case of Keycloak this is the Client ID.":[""],"OIDC Audience":[""],"The iss (issuer) claim identifies the principal that issued the JWT, which exists at a `/.well-known/openid-configuration` in case of most of the OpenID providers.":[""],"OIDC Issuer":[""],"The algorithm used to encode the JWT in the OpenID provider.":[""],"OIDC Algorithm":[""],"Config Management":[""],"Foreman will create the host when a report is received":["Foreman은 보고서를 수신할 때 호스트를 생성합니다 "],"Create new host when report is uploaded":["보고서를 업로드할 때 새 호스트 생성"],"Foreman matchers will be inherited by children when evaluating smart class parameters for hostgroups, organizations and locations":[""],"Matchers inheritance":[""],"Foreman will evaluate host smart class parameters in this order by default":[""],"Default parameters lookup path":[""],"Foreman will parse ERB in parameters value in the ENC output":["Foreman은 ENC 출력의 매개 변수 값 ERB를 구문 분석합니다 "],"Interpolate ERB in parameters":["매개 변수에 ERB 추가"],"All hosts will show a configuration status even when a Puppet smart proxy is not assigned":["Puppet 스마트 프록시가 할당되지 않은 경우에도 모든 호스트에 구성 상태를 표시합니다."],"Always show configuration status":["구성 상태 항상 표시"],"Email":["이메일 "],"Email reply address for emails that Foreman is sending":["Foreman이 전송하는 이메일에 대한 메일 회신 주소"],"Email reply address":["이메일 회신 주소"],"Prefix to add to all outgoing email":["모든 보내는 이메일에 추가할 접두사"],"Email subject prefix":["이메일 제목 접두사"],"Send a welcome email including username and URL to new users":["새 사용자에게 사용자 이름 및 URL이 포함된 환영 이메일을 보냅니다."],"Send welcome email":["환영 이메일 보내기"],"Method used to deliver email":[""],"Delivery method":[""],"Sendmail":["센드메일"],"SMTP":["SMTP"],"SMTP automatic STARTTLS":[""],"SMTP enable StartTLS auto":[""],"When using TLS, you can set how OpenSSL checks the certificate":[""],"SMTP OpenSSL verify mode":[""],"Default verification mode":[""],"none":["없음 "],"SMTP address to connect to":[""],"SMTP address":[""],"SMTP port to connect to":[""],"SMTP port":[""],"HELO/EHLO domain":[""],"SMTP HELO/EHLO domain":[""],"Username to use to authenticate, if required":[""],"SMTP username":[""],"Password to use to authenticate, if required":[""],"SMTP password":[""],"Specify authentication type, if required":[""],"SMTP authentication":[""],"Specify additional options to sendmail. Only used when the delivery method is set to sendmail.":[""],"Sendmail arguments":[""],"The location of the sendmail executable. Only used when the delivery method is set to sendmail.":[""],"Sendmail location":[""],"Invalid sendmail location, use settings.yaml for arbitrary location":[""],"Foreman will create the host when new facts are received":["Foreman은 새 정보를 수신할 때 호스트를 생성합니다 "],"Create new host when facts are uploaded":["팩트를 업로드할 때 새 호스트 생성"],"Hosts created after a puppet run will be placed in the location this fact dictates. The content of this fact should be the full label of the location.":["puppet 실행 후 생성되는 호스트는 정보가 정하는 위치에 배치됩니다. 이러한 정보의 내용은 위치 전체 레이블이 되어야 합니다. "],"Location fact":["위치 팩트"],"Hosts created after a puppet run will be placed in the organization this fact dictates. The content of this fact should be the full label of the organization.":["puppet 실행 후 생성되는 호스트는 이 정보가 정하는 조직에 배치됩니다. 이러한 정보의 내용은 조직 전체 레이블이 되어야 합니다."],"Organization fact":["조직 팩트"],"Hosts created after a puppet run that did not send a location fact will be placed in this location":["위치 정보를 전송하지 않고 puppet 실행 후 생성되는 호스트는 이 위치에 배치됩니다 "],"Default location":["기본 위치"],"Hosts created after a puppet run that did not send a organization fact will be placed in this organization":["조직 정보를 전송하지 않고 puppet 실행 후 생성되는 호스트는 이 조직에 배치됩니다 "],"Default organization":["기본 조직"],"Foreman will update a host's hostgroup from its facts":[""],"Update hostgroup from facts":[""],"Stop updating Operating System from facts":[""],"Ignore facts for operating system":[""],"Stop updating domain values from facts":[""],"Ignore facts for domain":[""],"Foreman will update a host's subnet from its facts":[""],"Update subnets from facts":[""],"Provisioning only":[""],"Stop updating IP and MAC address values from facts (affects all interfaces)":[""],"Ignore interfaces facts for provisioning":[""],"Skip creating or updating host network interfaces objects with identifiers matching these values from incoming facts. You can use * wildcard to match identifiers with indexes e.g. macvtap*. The ignored interfaces raw facts will be still stored in the DB, see the 'Exclude pattern' setting for more details.":[""],"Ignore interfaces with matching identifier":["일치하는 식별자가 있는 인터페이스 무시"],"Exclude pattern for all types of imported facts (puppet, ansible, rhsm). Those facts won't be stored in foreman's database. You can use * wildcard to match names with indexes e.g. ignore* will filter out ignore, ignore123 as well as a::ignore or even a::ignore123::b":[""],"Exclude pattern for facts stored in foreman":[""],"Browser locale":["브라우저 로케일 "],"Browser timezone":["브라우저 시간대"],"The default administrator email address":["기본값 관리자 이메일 주소 "],"Administrator email address":["관리자 이메일 주소"],"URL where your Foreman instance is reachable (see also Provisioning > unattended_url)":["Foreman 인스턴스가 도달할 수 있는 URL (프로비저닝 > unattended_url 참조)"],"Foreman URL":["Foreman URL"],"Number of records shown per page in Foreman":["Foreman에서 페이지 당 표시되는 기록 수"],"Entries per page":["페이지당 항목 수"],"Should the `foreman-rake db:seed` be executed on the next run of the installer modules?":["다음번 설치 프로그램 모듈 실행 시 `foreman-rake db:seed`를 실행해야 합니까? "],"DB pending seed":["DB 보류 중인 시드"],"Open and read timeout for HTTP requests from Foreman to Smart Proxy (in seconds)":[""],"Smart Proxy request timeout":[""],"Text to be shown in the login-page footer. Keyword $VERSION is replaced by current version.":[""],"Version":["버전 "],"Login page footer text":[""],"Set a proxy for all outgoing HTTP(S) connections from Foreman. System-wide proxies must be configured at the operating system level.":[""],"HTTP(S) proxy":[""],"Set hostnames to which requests are not to be proxied. Requests to the local host are excluded by default.":[""],"HTTP(S) proxy except hosts":[""],"Whether or not to show a menu to access experimental lab features (requires reload of page)":[""],"Show Experimental Labs":[""],"Foreman will append domain names when new hosts are provisioned":[""],"Append domain names to the host":[""],"Duration in minutes after servers are classed as out of sync. This setting is overridden by specific settings from config management tools (e.g. puppet_inteval, ansible_interval).":[""],"Out of sync interval":["비동기화 간격"],"Foreman instance ID, uniquely identifies this Foreman instance.":[""],"Foreman UUID":[""],"Language to use for new users":[""],"Default language":[""],"Timezone to use for new users":[""],"Default timezone":[""],"The instance title is shown on the top navigation bar (requires a page reload).":[""],"Instance title":[""],"Duration in days to preserve audits for. Leave empty to disable the audits cleanup.":[""],"Saved audits interval":[""],"Foreman will load the new UI for host details":[""],"New host details UI":[""],"Notifications":["통지 "],"Whether to pull RSS notifications or not":[""],"RSS enable":[""],"URL to fetch RSS notifications from":[""],"RSS URL":[""],"Users":["사용자 "],"Usergroups":[""],"Default owner on provisioned hosts, if empty Foreman will use current user":[""],"Host owner":[""],"Select an owner":[""],"Default encrypted root password on provisioned hosts":["프로비저닝 호스트의 기본값으로 암호화된 root 암호 "],"Root password":["루트 암호"],"URL hosts will retrieve templates from during build, when it starts with https unattended/userdata controllers cannot be accessed via HTTP":[""],"Unattended URL":["자동 URL"],"Enable safe mode config templates rendering (recommended)":["안전 모드 설정 템플릿 렌터링을 활성화 (권장 사항)"],"Safemode rendering":["안전 모드 렌더링"],"Allow access to unattended URLs without build mode being used":[""],"Access unattended without build":[""],"Foreman will query the locally configured resolver instead of the SOA/NS authorities":["Foreman은 SOA/NS 권한 대신 로컬 설정 분석기를 쿼리합니다 "],"Query local nameservers":["로컬 이름 서버 쿼리"],"Time in minutes installation tokens should be valid for, 0 to disable token generation":["설치 토큰의 유효성이 유지되는 시간(분)입니다. 0으로 설정하면 토큰 생성이 비활성화됩니다."],"Installation token lifetime":[""],"Time in seconds before SSH provisioning times out":[""],"SSH timeout":[""],"The IP address that should be used for the console listen address when provisioning new virtual machines via Libvirt":["Libvirt를 통한 새 가상 머신을 프로비저닝할 때 콘솔 수신 주소에 사용해야 하는 IP 주소입니다 "],"Libvirt default console address":["Libvirt 기본 콘솔 주소"],"Foreman will update the host IP with the IP that made the built request":["Foreman은 빌드 요청된 IP로 호스트 IP를 업데이트합니다 "],"Update IP from built request":["빌드 요청에서 IP 업데이트"],"Foreman will use the short hostname instead of the FQDN for creating new virtual machines":["Foreman은 새 가상 머신을 생성하기 위해 FQDN 대신 짧은 호스트 이름을 사용합니다 "],"Use short name for VMs":["VM에 약어 사용"],"List of timeouts (in seconds) for DNS lookup attempts such as the dns_lookup macro and DNS record conflict validation":[""],"DNS timeout":[""],"Foreman will delete virtual machine if provisioning script ends with non zero exit code":["프로비저닝 스크립트가 0이 아닌 종료 코드로 끝나면 Foreman이 가상 머신을 삭제합니다."],"Clean up failed deployment":["실패한 배포 정리"],"Random gives unique names, MAC-based are longer but stable (and only works with bare-metal)":[""],"Type of name generator":[""],"Default PXE menu item in global template - 'local', 'discovery' or custom, use blank for template default":[""],"Default PXE global template entry":[""],"Default PXE menu item in local template - 'local', 'force_local_chain_hd0' or custom, use blank for template default":[""],"Default PXE local template entry":[""],"Intermediate iPXE script for unattended installations":[""],"iPXE intermediate script":[""],"Destroy associated VM on host delete. When enabled, VMs linked to Hosts will be deleted on Compute Resource. When disabled, VMs are unlinked when the host is deleted, meaning they remain on Compute Resource and can be re-associated or imported back to Foreman again. This does not automatically power off the VM":[""],"Destroy associated VM on host delete":[""],"Maximum amount of keys in structured subtree, statistics stored in foreman::dropped_subtree_facts":[""],"Maximum structured facts":[""],"Global Registration template":[""],"Default Global registration template":[""],"Default 'Host initial configuration' template, automatically assigned when a new operating system is created":[""],"Default 'Host initial configuration' template":[""],"Full path to CoreOS transpiler (ct) with arguments as an comma-separated array":[""],"CoreOS Transpiler Command":[""],"Full path to Fedora CoreOS transpiler (fcct) with arguments as an comma-separated array":[""],"Fedora CoreOS Transpiler Command":[""],"Global default %s template. This template gets deployed to all configured TFTP servers. It will not be affected by upgrades.":[""],"Global default %s template":[""],"Template that will be selected as %s default for local boot.":[""],"Local boot %s template":[""],"Foreman will automate certificate signing upon provision of new host":["Foreman은 새 호스트의 프로비저닝에서 인증서 서명을 자동화합니다 "],"Manage PuppetCA":["PuppetCA 관리"],"Foreman will use random UUIDs for certificate signing instead of hostnames":["Foreman은 인증서 서명을 위해 호스트 이름 대신 임의의 UUID를 사용합니다 "],"Use UUID for certificates":["인증서에 UUID 사용"],"My Account":[""],"Log Out":[""],"Administer":["관리자"],"Locations":["위치 "],"Organizations":["조직 "],"Authentication Sources":[""],"User Groups":["사용자 그룹"],"Roles":["역할 "],"Bookmarks":["북마크"],"Settings":["설정 "],"About":["정보 "],"Monitor":["모니터"],"Dashboard":["대시보드 "],"Host Statuses":[""],"Report Templates":[""],"All Hosts":[""],"Register Host":["호스트 등록"],"Provisioning Setup":["프로비저닝 설정 "],"Architectures":["아키텍처 "],"Hardware Models":["하드웨어 모델 "],"Installation Media":["설치 미디어 "],"Operating Systems":["운영 체제 "],"Partition Tables":["파티션 테이블 "],"Provisioning Templates":["프로비저닝 템플릿 "],"Configure":["설정"],"Host Groups":["호스트 그룹 "],"Global Parameters":["글로벌 매개 변수 "],"Infrastructure":["인프라 "],"Smart Proxies":["스마트 프록시 "],"Compute Profiles":[""],"Subnets":["서브넷 "],"Domains":["도메인 "],"HTTP Proxies":[""],"Realms":["영역 "],"Lab Features":[""],"Cannot add pagelet with key %s and without partial":[""],"Cannot add pagelet with key %s and without mountpoint":[""],"Pagelet with %s key is not found":[""],"unknown permission %s":["알 수 없는 권한 %s"],"LookupKey|Default value":["기본값 "],"invalid type %s":["잘못된 유형 %s"],"Unallowed template for dashboard widget: %s":["대시보드 위젯에 허용되지 않는 템플릿: %s"],"Host Configuration Status for %s":[""],"Host Configuration Chart for %s":[""],"Run Distribution Chart for %s":[""],"Latest Events":["최신 이벤트 "],"New Hosts":[""],"Hosts in build mode":[""],"Import of facts failed for host %s":[""],"Invalid version format, please enter in x.y (only major version).":["잘못된 버전 형식입니다. x.y 형식(메이저 버전만)으로 입력하십시오."],"%{value} is not one of %{rules}":["%{value}은(는) %{rules} 중 하나가 아닙니다 "],"BCrypt salt '%s' is invalid":[""],"Password hash setting was not yet set":[""],"Unknown password hash method: %s":[""],"Syntax error occurred while parsing the template %{name}, make sure you have all ERB tags properly closed and the Ruby syntax is valid. The Ruby error: %{message}":[""],"%{object_name} is a %{object_class}, expected a subnet":[""],"This templates requires a host to render but none was specified":[""],"Parameter %{name} is not set for host %{host}":[""],"Parameter %{name} is not set in host %{host} ENC output, resolving failed on step %{step}":[""],"Global setting %{name} is not accessible in safe-mode":[""],"Unknown host status \\\"%{status}\\\" was specified in host_status macro, use one of %{statuses}":[""],"Rendering failed, no input with name \\\"%{s}\\\" for input macro found":[""],"%{name} value is a \\\"%{type}\\\", expected \\\"resource\\\" value type":[""],"Rendering failed, one or more unknown columns specified for ordering - \\\"%{unknown}\\\"":[""],"Hostgroup not found or not accessible":[""],"Undefined setting '%{setting}'":[""],"Unsupported or no operating system found for this host.":["지원되지 않거나 이 호스트의 운영 체제를 찾을 수 없습니다."],"Unkown '%{klass}' resource class":[""],"SSL CA file not found, check the 'Server CA file' and 'SSL CA file' in Settings > Authentication":[""],"%s is not auditable":[""],"The snippet '%{name}' threw an error: %{exc}":[""],"%{controller}: provisioning token for host %{host} expired":[""],"%{controller}: unable to find a host that matches the request from %{addr}":[""],"%{controller}: %{host}'s operating system is missing":[""],"%{controller}: %{host}'s operating system %{os} has no OS family":[""],"Failed to validate %{host}: %{error}":["%{host} 확인에 실패했습니다: %{error}"],"No templates found for this host.":["이 호스트의 템플릿을 찾을 수 없습니다."],"Template %s is empty.":["템플릿 %s이 비어있습니다. "],"Failure parsing %{template}: %{error}.":["%{template} 구문 분석 실패: %{error}"],"No smart proxies found.":["스마트 프록시를 찾을 수 없습니다. "],"Failure deploying via smart proxy %{proxy}: %{error}.":["스마트 프록시 %{proxy}를 통한 배포 실패: %{error}"],"Error connecting to %{proxy}: %{error}.":["%{proxy}에 연결하는 도중 오류 발생: %{error}."],"%{input_type_attr_name}, used when input type is %{input_type}":[""],"Fact value":["정보 값 "],"Value for required input '%s' was not specified":["필수 입력 '%s'의 값을 지정하지 않았습니다."],"User input":["사용자 입력"],"Should the value be hidden from users? Useful for sensitive input values such as passwords. Only applicable to Plain value types.":[""],"A list of options the user can select from. If not provided, the user will be given a free-form field":["사용자가 선택할 수 있는 옵션의 목록입니다. 지정하지 않을 경우 사용자에게 자유 형식 필드가 제공됩니다."],"Variable":["변수 "],"Unknown interface type, must be one of [%s]":["알 수 없는 인터페이스 유형. [%s] 중 하나이어야 합니다 "],"Internal DB":["내부 DB"],"Random DB":[""],"EUI-64":[""],"Unknown IPAM type - can't continue":[""],"is not a valid MAC address":["올바른 MAC 주소가 아닙니다 "],"no free IP could be found in our DB":[""],"Unable to suggest IP: subnet %s don't have a DHCP proxy associated, a proxy is not in subnets organization or IPAM is not set to DHCP":[""],"Failed to fetch a free IP from proxy %{proxy}: %{message}":[""],"Network can't be blank":[""],"Prefix length can't be blank":[""],"no random free IP could be found in our DB, enlarge subnet range":[""],"Operating system was not set for host '%{host}'":[""],"%{os} medium was not set for host '%{host}'":[""],"Invalid medium '%{medium}' for '%{os}'":[""],"Invalid architecture '%{arch}' for '%{os}'":[""],"Random-based":[""],"MAC-based":[""],"Unable to find IP address for '%s'":[" '%s'의 IP 주소를 찾을 수 없습니다 "],"Unsupported password hash function '%s'":["지원되지 않는 암호 해시 함수 '%s'"],"start":["시작 "],"stop":["중지 "],"poweroff":["전원 끄기 "],"reboot":["재부팅 "],"reset":["재설정 "],"soft":["소프트 "],"cycle":["사이클 "],"state":["상태 "],"on":["켜기 "],"off":["끄기 "],"status":["상태 "],"ready?":["준비되셨습니까? "],"Invalid power state request: %{action}, supported actions are %{supported}":["잘못된 전원 상태 요청: %{action}, 지원되는 동작은 %{supported}입니다 "],"Unknown":["알 수 없음 "],"Failed to retrieve power status for %{host} within %{req_timeout} second.":[""],"Timeout has occurred while communicating with %s":["%s와 통신하는 도중 시간 초과되었습니다 "],"Error has occurred while communicating with %{cr}: %{e}":["%{cr}와 통신하는 도중 오류가 발생했습니다: %{e}"],"Unable to get BMC providers":["BMC 공급자를 가져올 수 없습니다 "],"Unable to get installed BMC providers":["설치된 BMC 공급자를 가져올 수 없습니다 "],"Unable to perform boot BMC operation":["boot BMC 작업을 실행할 수 없습니다 "],"Unable to perform power BMC operation":["power BMC 작업을 실행할 수 없습니다 "],"Unable to perform identify BMC operation":["identify BMC 작업을 실행할 수 없습니다 "],"Unable to perform lan BMC operation":["lan BMC 작업을 실행할 수 없습니다 "],"Unable to retrieve DHCP subnets":["DHCP 서브넷을 검색할 수 없습니다 "],"Unable to retrieve DHCP subnet":["DHCP 서브넷을 검색할 수 없습니다 "],"Unable to retrieve unused IP":["사용되지 않는 IP를 검색할 수 없습니다 "],"Unable to retrieve DHCP entry for %s":["%s의 DHCP 항목을 검색할 수 없습니다 "],"Unable to set DHCP entry":["DHCP 항목을 설정할 수 없습니다 "],"Unable to delete DHCP entry for %s":["%s의 DHCP 항목을 삭제할 수 없습니다 "],"Unable to set DNS entry":["DNS 항목을 설정할 수 없습니다 "],"Unable to delete DNS entry":["DNS 항목을 삭제할 수 없습니다 "],"Unable to retrieve the next available IP for subnet %{subnet} External IPAM.":[""],"Unable to add IP %{ip} to the subnet %{subnet} in External IPAM.":[""],"Unable to obtain groups from External IPAM.":[""],"Unable to obtain group %{group} from External IPAM.":[""],"Unable to obtain subnets in group %{group} from External IPAM.":[""],"Unable to obtain subnet %{subnet} from External IPAM.":[""],"Unable to obtain IP address for subnet %{subnet} in External IPAM.":[""],"Unable to delete IP %{ip} from the subnet %{subnet} in External IPAM.":[""],"Unable to detect features":["기능을 감지할 수 없습니다 "],"Unable to fetch logs":["로그를 가져올 수 없습니다"],"for proxy":["프록시의 경우 "],"Unable to get environments from Puppet":["Puppet에서 환경을 가져올 수 없습니다 "],"Unable to get environment from Puppet":["Puppet에서 환경을 가져올 수 없습니다 "],"Unable to get classes from Puppet for %s":["%s의 Puppet에서 클래스를 가져올 수 없습니다 "],"Unable to get PuppetCA autosign":["PuppetCA 자동 서명을 가져올 수 없습니다 "],"Unable to set PuppetCA autosign for %s":["%s의 PuppetCA 자동 서명을 설정할 수 없습니다 "],"Unable to delete PuppetCA autosign for %s":["%s의 PuppetCA 자동 서명을 삭제할 수 없음 "],"Unable to sign PuppetCA certificate for %s":["%s의 PuppetCA 인증서에 서명할 수 없습니다 "],"Unable to delete PuppetCA certificate for %s":["%s의 PuppetCA 인증서를 삭제할 수 없습니다 "],"Unable to get PuppetCA certificates":["PuppetCA 인증서를 가져올 수 없습니다 "],"Unable to create realm entry":["영역 항목을 생성할 수 없습니다 "],"Unable to read SSL certification or key for proxy communication, check settings for ssl_certificate, ssl_ca_file and ssl_priv_key and ensure they are readable by the foreman user.":[""],"Unable to set TFTP boot entry for %s":["%s의 TFTP 부트 항목을 설정할 수 없습니다 "],"Unable to delete TFTP boot entry for %s":["%s의 TFTP 부트 항목을 삭제할 수 없습니다 "],"Unable to fetch TFTP boot file":["TFTP 부팅 파일을 가져올 수 없습니다 "],"Unable to detect TFTP boot server":["TFTP 부트 서버를 감지할 수 없습니다 "],"Unable to create default TFTP boot menu":["기본값 TFTP 부트 메뉴를 생성할 수 없습니다 "],"Unable to detect version":["버전을 감지할 수 없습니다"],"Proxy reference should be { :relation => [:column_name, ...] }":[""],"Unable to initialize ProxyAPI class %s":["ProxyAPI 클래스 %s을(를) 초기화할 수 없습니다."],"Unable to connect":["연결할 수 없음"],"Could not locate CA certificate.":["CA 인증서를 찾을 수 없습니다."],"Invalid report":["잘못된 보고서 "],"Invalid log level: %s":["잘못된 로그 레벨: %s"],"Setting definition for '%s' not found, can not set":[""],"expected a value of type %s":[""],"unable to sign a non pending certificate":["보류 중이 아닌 인증서에 서명할 수 없습니다 "],"expecting %s used by hosts or inherited (check mismatches report).":[""],"Report \\\"%s\\\" is ready to download":[""],"Download Report":[""],"Regenerate Report":[""],"Open":[""],"must only contain alphanumeric or underscore characters":[""],"must contain valid hostnames":[""],"must be comma separated":[""],"with given ID not found":[""],"is not defined for host's %s":[""],"does not match selected subnet":["선택한 서브넷과 일치하지 않습니다 "],"%{value} is not a valid controller":["%{value}은(는) 올바른 컨트롤러가 아닙니다 "],"is too long (maximum is 254 characters)":[""],"Invalid HTTP(S) URL":[""],"can't contain spaces.":["공백을 포함할 수 없습니다."],"was not found":[""],"does not have the %s feature":[""],"is invalid. No provisioning template with name \\\"%{name}\\\" and kind \\\"%{kind}\\\" found. ":[""],"Consult \\\"Provisioning Templates\\\" page to see what templates are available.":[""],"must be a valid regexp":[""],"is not a valid public ssh key":[""],"MTU is not consistent across subnets":[""],"VLAN ID is not consistent across subnets":[""],"URL must be valid and schema must be one of %s":["URL이 유효하고 스키마가 %s 중 하나여야 합니다."],"System Status":["시스템 상태 "],"Available Providers":["사용 가능한 공급자 "],"Plugins":["플러그인"],"No smart proxies to show":["표시할 스마트 프록시가 없음 "],"Name":["이름 "],"Features":["기능 "],"Provider":["공급자 "],"Not Installed":["설치되지 않음 "],"To enable a provider, either install the OS package (e.g. foreman-libvirt) or enable the bundler group for development setup (e.g. ovirt).":["공급자를 활성화하려면 OS 패키지 (예: foreman-libvirt)를 설치하거나 개발 설정을 위한 번들러 그룹 (e.g. ovirt) 활성화합니다."],"No compute resource to show":["표시할 컴퓨터 리소스가 없음 "],"Type":["유형"],"No plugins found":["플러그인을 찾을 수 없습니다 "],"Description":["설명 "],"Author":["저자 "],"Support":["지원"],"API Resources":[""],"Automate Foreman via a simple and powerful API":[""],"Templates DSL":[""],"Get DSL reference for templates writing":[""],"Manual":["수동"],"Wiki":["위키"],"IRC":["IRC"],"You can find The Foreman on the %{liberachat} (irc.libera.chat) network. For general support, please visit #theforeman and for development specific related chat, please visit #theforeman-dev.":[""],"Forums":[""],"You can use the %{community_forums} to ask for help or advice, participate in discussions around challenges or ideas you have with Foreman.":[""],"community forums":[""],"Issue tracker":["문제 추적기 "],"We use Redmine to report and track bugs and feature requests, which can be found here:":["다음과 같이 버그 보고, 추적, 기능 요구에 Redmine을 사용합니다: "],"issue tracker":["문제 추적기 "],"System Information":["시스템 정보 "],"Version %{version} %{copyright} 2009-%{year} Paul Kelly and %{author}":[""],"Instance %{uuid}":[""],"Access denied":["접근 거부됨"],"Resource %{resource_name} not found by id '%{id}'":["리소스 %{resource_name}을(를) ID '%{id}'로 찾을 수 없습니다 "],"Unable to authenticate user %s":["사용자 %s을(를) 인증할 수 없습니다 "],"Media type in 'Content-Type: %s' is unsupported in API v2 for POST and PUT requests. Please use 'Content-Type: application/json'.":[""],"Environments got deprecated from this endpoint.":[""],"Search fields":[""],"Field name":[""],"Possible values":[""],"Template writing help":[""],"Content":["컨텐츠"],"What is ERB":[""],"Writing ERB templates":[""],"Indentation in ERB templates":[""],"Basic building blocks - macros, variables, methods":[""],"Conditional statements":[""],"Iterating over Arrays":[""],"Built-in variables":[""],"Inputs":["입력"],"Snippets":[""],"Safe mode":[""],"Disabling Safe mode":[""],"This section provides an introduction to ERB templates and the rendering engine, and illustrates the core principles with examples. Note that the default templates that are provided with the installation are also a good source of ERB syntax examples.":[""],"Embedded Ruby (ERB) is a tool for generating text files based on templates that combine plain text with Ruby code. Foreman uses ERB syntax in the following cases:":[""],"Provisioning templates":["프로비저닝 템플릿 "],"Templates for partition tables":[""],"Report templates":[""],"Smart Class Parameters":[""],"Parameters":["매개 변수 "],"Remote execution job templates":[""],"When the system asks for evaluated template, the code in the ERB tags is executed and the variables are replaced with their current values. This process is referred to as rendering. Typically rendering occurs during provisioning, when Kickstart file is asked by Anaconda or partition table is about to be deployed. Rendering also happens when a Remote Execution job is triggered to render the script to be executed. While the ERB exposes the power of programming language executed on the application server, the rendering mechanism has the safemode rendering option enabled by default, which prevents any harmful code being executed from templates.":[""],"Each template type rendering capabilities slightly differ, e.g. a provisioning template is always rendered for a single host object and therefore a @host variable is defined. Another example is a report template, where report formatting specific macros are available.":[""],"Writing ERB Templates":[""],"The following tags are the most important and commonly used in ERB templates":[""],"All Ruby code is enclosed within <code><&#37; &#37;></code> in an ERB template. The code is executed when the template is rendered. It can contain Ruby control flow structures as well as application-specific macros and variables. For example:":[""],"Note that there is no output from tags starting with <% when the template is rendered.":[""],"This provides the same functionality as <code><%</code> but when the template is executed, the code output is inserted into the template. This is useful for variable substitution, for example:":[""],"Note that words starting with <code>@</code> are instance variables. When the template is rendered, some instance variables are automatically predefined. Whether you can use a predefined variable depends on the template type, for example, the variable @host is available for the provisioning template, partition tables, and remote execution jobs.":[""],"Note that if you enter an incorrect instance variable, no output is returned. However, if you try to call a method on an incorrect variable, the following error message returns:":[""],"By default, a newline character is inserted after a Ruby block if it is closed at the end of a line:":[""],"To change the default behavior, modify the enclosing mark with <code>-&#37;></code>:":[""],"This is used to reduce the number of lines, where Ruby syntax permits, in rendered templates. White spaces in ERB tags are ignored.":[""],"The following example demonstrates how this is used to to remove unnecessary newlines between a FQDN and IP address:":[""],"Note the extra space before IP, the <code>-&#37;></code> removes the new line character only if there is no other text after it. Therefore the white space needs to be at the new line.":[""],"Encloses a comment that is ignored during template rendering:":[""],"This generates no output. However if the closing tag was <code>&#37;></code> without the dash, it would generate a new line":[""],"Because of the varying lengths of the ERB tags, indenting the ERB syntax might seem messy. ERB syntax ignores white space. One method of handling the indentation is to declare the ERB tag at the beginning of each new line and then use white space within the ERB tag to outline the relationships within the syntax, for example:":[""],"The Ruby code inside of the ERB tags typically contain expressions. They consist of program flow control terminals, variables, macros. Variables and macros evaluates to objects. Each object has set of allowed methods that can be called on it. These methods can return objects.":[""],"An example of a control flow terminal is an if condition or for each cycle. Macros are functions called by their name without specifying any object, e.g. %{load_hosts} or %{input}. See all available macros %{all_macros}. Example of object class is an %{integer}, String, %{host}, %{subnet}, %{user}. Calling a method on an object is denoted by <code>.</code>. For example <code>@host.fqdn</code> expression is an instance variable that holds and evaluates to an object of a Host, on which the fqdn method is called. To find the list of all available methods on objects, see the documentation for each template type.":[""],"here":["여기 "],"In the following example, <code>if</code> and <code>==</code> are terminals, <code>@host</code> is instance variable holding the object of the %{host_object_link} class, <code>.domain</code> is the call of the method named %{domain_method_link} on this %{host_object_link} object. That returns the %{domain_object_link} object. <code>.name</code> is then calling of a method %{name_method_link} on this %{domain_object_link} object. The resulting name of the domain is then compared with fixed string object example.com":[""],"In your templates, you might perform different actions depending on which value exists. To achieve this, you can use conditional statements in your ERB syntax.":[""],"In the following example, the ERB syntax searches for a specific host name and returns an output depending on the value it finds:":[""],"Note that the else branch is optional. Also multiple conditions can be specified using elsif, but that is usually better written using a case/when construct. See the example below":[""],"Note that the else branch is optional and can be omitted.":[""],"Sometimes it is necessary to iterate over arrays in order to retrieve the information. This is typically required in report templates when loaders are used, however the same technique is useful elsewhere too.":[""],"For example, this can be useful to configure all the Host NICs.":[""],"As you can see in the example above, the <code>interfaces</code> method on Host object returns a new object of type Collection. For simplicity, think of it as an array of all host interfaces. To process every item in this array, a method <code>each</code> is used.":[""],"This is the simple example of iterating over array of two interfaces and only printing the IP address of each. In reality, the interface object can be used to fetch more information, as shown in the following example. To see all available methods, see the documentation for %s object.":[""],"The information from above can be used e.g. to create a NetworkManager configuration file for each interface in the provisioning template.":[""],"In a report template, loader macros are used most of the time. Iterating over results of these is a little different. It is important to use <code>each_record</code> instead of <code>each</code>, because loaders load objects in batches and each record in fact represents the batch. Otherwise the construct looks the same, as shown in the following example":[""],"Templates can access built-in instance variables denoted by <code>@</code>.":[""],"Template":["템플릿"],"Name of the template being rendered, \\\"Unnamed\\\" when the template does not have a name, e.g. preview on unsaved template.":[""],"\\\"preview\\\" or \\\"real\\\", this can be used to change the behavior for previewing the template":[""],"Represents the host object for which the template is rendered.":[""],"To customize a template for each individual rendering, various inputs can be defined. Inputs are of several types. Different template types support different input types.":[""],"A user needs to specify the value when the template is rendered. A value type can also be specified, determining the filling mode. A plain value can be specified as an arbitrary string, A search value allows the auto-completion in the UI, A date expects a date value and UI provides a calendar helper. A user input can have a default value set. The value can be hidden with asterisks, which is useful for sensitive information. For a plain value type, multiple options can be inserted. During the rendering, a user must pick one of the specified values.":[""],"This input value is fed from a specified fact for the host, which the template is being rendered for. This way the template can access e.g. the host cpus number.":[""],"This input value is fed from parameter values calculated for the host, which the template is being rendered for. This way the template can access a value of a global parameter, which is applied to every host. If that parameter would be overridden e.g. on a host's subnet level, this value would be fed to this input.":[""],"Puppet parameter":["Puppet 매개 변수"],"Similar to the variable input type, however, it loads the value for a specific smart class parameter. The user must specify the Puppet class and the smart class parameter name when defining the input.":[""],"All inputs defined for a single template must have a have unique name that is then used in ERB code. Inputs can optionally have a description that is rendered as an inline help when the template is rendered.":[""],"Once a template input is defined in the Inputs tab and the template is saved, it can be used in the ERB. To load a value specified through this input, a global macro <code>input</code> is used. The input name must be specified as the argument. E.g. the example below will load the value through input called cpus.":[""],"While rendering the template in preview mode, the input either loads the value or uses a placeholder in case the input is not ready for rendering. If the template is rendered and the input is not ready, an error is thrown. The readiness criteria differs per input type, e.g. for Fact inputs linked to a host's fact with the name \\\"cpu_count\\\" , when @host contains a value for the fact, the input is ready.":[""],"As mentioned above, different template types support different template inputs. See the table below for available combinations.":[""],"Template type":[""],"Available input types":[""],"Snippets are smaller, reusable templates that can be used to customize other templates. For example, a bootstrap procedure that must run on every provisioned host, but to achieve this requires modifying multiple kickstart templates. To avoid duplication, a snippet can be used. Assuming there is a snippet created with a name Bootstrap, following example will inject it into a template":[""],"Safe Mode is a safety mechanism that is in place to prevent accidents from occurring. It contains a list of Ruby methods that can be used safely in a template. When a safe-mode-protected method is called accidentally, rendering fails with the error that says \\\"Safemode doesn't allow to access ...\\\".":[""],"Aim to use macros and variables that are already available with Safe Mode enabled in your template. If you are looking for some information that you are not able to retrieve via allowed methods or macros listed in this documentation, you can consider disabling the Safe Mode. Doing that, you will be able to access all internal application variables and methods directly, when the template is rendered.":[""],"Be aware, this is dangerous and it can cause performance and security issues. Disabling safe mode allows any Ruby code to be executed on the server. Any application user that can edit the template can modify the template, so that when it is rendered, it spawns a shell process and runs an arbitrary command in it. These commands are run as the \\\"foreman\\\" user and are still restricted by SELinux policy. Disabling Safe Mode is only recommended in a trusted environment.":[""],"In order to disable Safe mode, navigate to Administer -> %{settings_link} -> Provisioning tab and search for a setting called \\\"Safemode rendering\\\". Value \\\"No\\\" means, rendering is unprotected and potentially dangerous. This installation has currently safe mode: <b>%{status}</b>.":[""],"enabled":[""],"disabled":[""],"Create Architecture":[""],"Architecture|Name":["이름 "],"<b>Foreman</b> audit summary":["<b>Foreman</b> 감사 요약"],"Displaying %{num_audits} of %{total_audits} audit":[""],"No audit changes for this period":["이 기간의 감사 변경 사항 없음"],"Full audits list":["전체 감사 목록"],"Foreman audit summary":["Foreman 감사 요약"],"External Documentation":[""],"Edit External Authentication Source":[""],"LDAP server":["LDAP 서버 "],"Account":["계정 "],"Attribute mappings":["속성 매핑 "],"Test LDAP connectivity":["LDAP 연결 테스트"],"Choose a server type":["서버 유형 선택 "],"Server type":["서버 유형 "],"Use this account to authenticate, <i>optional</i>":["인증을 위해 이 계정을 사용합니다. <i>옵션</i>"],"Base DN":["기본 DN"],"Groups base DN":["그룹의 기본 DN "],"Use NIS netgroups instead of posix groups.":[""],"By default we map user groups to standard LDAP Group objects. FreeIPA and POSIX LDAP server types supports alternative way of grouping users through Netgroups. Enable this checkbox if using Netgroups is preferred instead of standard groups.":[""],"Custom LDAP search filter, <i>optional</i>":["사용자 정의 LDAP 검색 필터, <i>옵션</i>"],"LDAP users will have their Foreman account automatically created the first time they log into Foreman":["LDAP 사용자는 처음으로 Foreman에 로그인할 때 자동으로 Foreman 계정을 생성합니다 "],"External user groups will be synced on login, else relies on periodic cronjob to check group membership":["외부 사용자 그룹은 로그인 시에 동기화됩니다. 또는 주기적인 cronjob을 통해 그룹 멤버쉽을 확인합니다."],"e.g. uid":["예: uid"],"e.g. givenName":["예: givenName"],"e.g. sn":["예: sn"],"e.g. mail":["예: mail"],"Photo attribute":["사진 속성 "],"e.g. jpegPhoto":["예: jpegPhoto"],"Create":["생성 "],"LDAP Documentation":[""],"AuthSource|Name":["이름 "],"AuthSource|Host":["호스트 "],"AuthSource|Onthefly register":["즉시 등록 "],"AuthSource|LDAPS":["LDAP"],"Create LDAP Auth Source":[""],"Autosign Entries":["자동 서명 항목 "],"Add Autosign entry":["자동 서명 항목 추가"],"View list":["목록 표시"],"New Autosign Entry":["새 자동 서명 항목 "],"Save":["저장"],"Bookmark|Name":["이름 "],"Bookmark|Query":["쿼리 "],"Bookmark|Controller":["컨트롤러 "],"Bookmark|Public":["공개 "],"You don't seem to have any bookmarks. Bookmarks are saved search queries. To save them, click on 'Bookmark this search' on the dropdown next to every search button.":[""],"Permission denied":["권한이 거부되었습니다"],"You are not authorized to perform this action.":["이 작업을 수행할 권한이 없습니다."],"Please request one of the required permissions listed below from a Foreman administrator:":["Foreman 관리자에게 아래에 나열된 필수 권한 중 하나를 요청하십시오."],"Back":["뒤로 "],"not found":["찾을 수 없음"],"Please try to update your request":["요청을 업데이트하십시오 "],"Oops, we're sorry but something went wrong":["오류. 문제가 발생했습니다 "],"If you feel this is an error with Foreman itself, please open a new issue with":["이것이 Foreman 자체의 오류라고 생각되시면 새로운 문제로 제출하십시오"],"Foreman ticketing system":["Foreman 티켓 생성 시스템 "],"Please include in your report the full error log that can be acquired by running: ":[""],"Search your logs for request-id":[""],"When using external logging, search for request UUID":[""]," and it is highly recommended to also attach the foreman-debug output.":[""],"Service unavailable":["서비스를 이용할 수 없습니다."],"Failure: %s":["오류: %s"],"Unknown records found in the database":[""],"Foreman has detected definitions of unknown classes in your database. This can happen after a plugin removal which did not properly cleaned up data it created. Would you like to delete all records from SQL table <b>\\\"%{table}\\\"</b> with column <b>\\\"%{column}\\\"</b> having the value <b>\\\"%{value}\\\"</b>":[""],"Automatic cleanup has failed, there are probably other records still referencing this data, please do the clean up manually in the database and then refresh this page.":[""],"Creating a DB backup before proceeding is highly recommended!":[""],"The data deletion can not be undone, are you sure you want to proceed?":[""],"Please contact your administrator, the request id for finding the logs: \\\"%s\\\"":[""],"Operating system":["운영 체제 "],"No options available for selected Architecture":[""],"OS Image":["OS 이미지 "],"Build from OS image":["OS 이미지에서 빌드 "],"Media":["미디어 "],"No options available for selected Operating System":[""],"Partition Table":["파티션 테이블 "],"PXE loader":[""],"DHCP filename option to use. Set to None for non-PXE method (e.g. iPXE). Auto-suggested, use OS parameter 'pxe-loader' to override.":[""],"Override":["덮어쓰기 "],"Override this value":["이 값 덮어쓰기 "],"Remove":["삭제 "],"Add Parameter":["매개 변수 추가 "],"Create Parameter":[""],"Parameter|Name":["이름 "],"Parameter|Value":["값 "],"Parameter|Type":[""],"Create Global Parameter":[""],"Foreman allows to define a hierarchy of parameter inheritance, where global parameters accessible from any manifest.":[""],"Compute profile":["컴퓨터 프로파일 "],"Compute resource":["컴퓨터 리소스 "],"New %s":["새 %s"],"Edit Compute profile":["컴퓨터 프로파일 편집 "],"Create Compute Profile":[""],"Rename":["이름 변경 "],"Click on the link of a compute resource to edit its default VM attributes.":["기본값 VM 속성을 편집하기 위해 컴퓨팅 리소스 링크를 클릭합니다. "],"Compute Resource":["컴퓨터 리소스 "],"VM Attributes (%s)":["VM 속성 (%s)"],"unspecified":["지정되어 있지 않음 "],"A compute profile is a way of expressing a set of defaults for VMs created on a specific compute resource that can be mapped to an operator-defined label. This means an administrator can express, for example, what 'Small', 'Medium' or 'Large' means on all of the individual compute resources present for a given installation.":[""],"Choose a provider":["공급자 선택 "],"Access Key":["액세스 키"],"Secret Key":["비밀 키 "],"Region":["지역 "],"Load Regions":["지역 로드 "],"Google Project ID":["글로벌 프로젝트 ID"],"Client Email":["클라이언트 이메일 "],"Certificate Path":[""],"The file path where your JSON file is located":[""],"Zone":["영역 "],"Load Zones":[""],"e.g. qemu://host.example.com/system":["예: qemu://host.example.com/system"],"Display Type":[""],"Console Passwords":[""],"Set a randomly generated password on the display connection":["디스플레이 연결 시 임의로 생성된 암호를 설정합니다"],"URL":["URL"],"Use /v2 or /v3 to force API version, e.g. http://openstack:5000/v2.0/tokens or http://openstack:5000/v3/auth/tokens":[""],"Project (Tenant) name":[""],"Project name (v3) or Tenant name (v2). Can be retrieved via CLI or RC file.":[""],"User domain":[""],"Can be retrieved via CLI or RC file, e.g. 'redhat.com'. Only for v3 authentication.":[""],"Project domain name":[""],"Can be retrieved via CLI or RC file. Can be left blank. Only for v3 authentication.":[""],"Project domain ID":[""],"Can be retrieved via CLI or RC file. Can be set to 'default'. Only for v3 authentication.":[""],"Allow external network as main network":["외부 네트워크를 기본 네트워크로 허용"],"e.g. https://ovirt.example.com/ovirt-engine/api":[""],"e.g. admin@internal":["예: admin@internal"],"Datacenter":["데이터 센터 "],"Quota ID":["쿼터 ID"],"Default Display Type":[""],"Default VNC Keyboard":[""],"X509 Certification Authorities":["X509 인증 기관 "],"Optionally provide a CA, or a correctly ordered CA chain. If left blank, a self-signed CA will be populated automatically by the server during the first request.":["옵션으로 CA 또는 올바르게 정렬된 CA 체인을 지정합니다. 빈 칸으로 두면 처음 요청시 서버가 자동 서명된 CA를 자동으로 설정하게 됩니다."],"VCenter/Server":["VCenter/서버"],"Fingerprint":["지문 "],"VNC consoles are unsupported on VMware ESXi 6.5 and later.":[""],"VNC Console Passwords":[""],"Set a randomly generated password on the VNC display connection":[""],"Enable Caching":[""],"Cache slow calls to VMWare to speed up page rendering":[""],"Create Compute Resource":[""],"ComputeResource|Name":["이름 "],"Associate VMs":["VM 연결 "],"Associate VMs to Foreman hosts":["VM을 Foreman 호스트에 연결 "],"Refresh Cache":[""],"Virtual Machines":["가상머신"],"SSH keys":[""],"Compute profiles":["컴퓨터 프로파일 "],"Property":["속성 "],"Loading virtual machines information ...":["가상 머신 정보 로딩 중 ..."],"Create Image":[""],"Loading images information ...":["이미지 정보 로드 중 ..."],"Loading SSH keys information ...":[""],"VM Attributes":["VM 속성 "],"Enabled":["활성화됨 "],"Disabled":["비활성화됨 "],"Operating systems API supported?":[""],"Console passwords":["콘솔 암호 "],"Caching":[""],"Foreman supports creating and managing hosts on a number of virtualization and cloud services - referred to as “compute resources” - as well as bare metal hosts.":[""],"There was an error listing %{listing}: %{errors}":[""],"Network interfaces":["네트워크 인터페이스 "],"Add Interface":["인터페이스 추가 "],"add new network interface":["새 네트워크 인터페이스 추가 "],"No networks found.":["네트워크를 찾을 수 없습니다."],"Storage":["스토리지 "],"remove storage volume":["스토리지 볼륨 삭제"],"Add Volume":["볼륨 추가 "],"add new storage volume":["새 스토리지 볼륨 추가 "],"Unable to define volumes:":[""],"Flavor":["종류 "],"Please select an image":["이미지를 선택하십시오"],"No preference":["설정이 없습니다 "],"Availability zone":["사용 가능한 영역 "],"EC2":["EC2"],"Subnet":["서브넷"],"Security groups":["보안 그룹 "],"Public":["공개 "],"Private":["비공개"],"Managed IP":["관리 IP"],"Tags":["태그"],"Key":["키 "],"Add tag":[""],"Remove tag":[""],"Machine type":["시스템 유형 "],"Associate Ephemeral External IP":[""],"Size (GB)":["크기 (GB)"],"CPUs":["CPU"],"CPU mode":[""],"Memory":["메모리 "],"Power ON this machine":["컴퓨터의 전원 켜기 "],"Start":["시작 "],"Image to use":["사용할 이미지 "],"Network type":["네트워크 유형 "],"No networks":["네트워크 없음 "],"There was no active bridge interface found in libvirt, if it does not support listing, you can enter the bridge name manually (e.g. br0)":[""],"NIC type":["NIC 유형 "],"Storage pool":["스토리지 풀 "],"Tenant":["테넌트 "],"Internal network":["내부 네트워크 "],"Floating IP network":["부동 IP 네트워크 "],"Boot from volume":["볼륨에서 부팅"],"Create new boot volume from image":["이미지의 새 부팅 볼륨 생성"],"New boot volume size (GB)":["새 부팅 볼륨 크기(GB)"],"Defaults to image size if left blank":["비워 둘 경우 이미지 크기로 기본 설정됩니다."],"Scheduler hint filter":[""],"JSON object of the scheduler hint":[""],"Server hint data":[""],"Server group":[""],"Cluster":["클러스터"],"Blank template":[""],"oVirt/RHEV template to use":["사용할 oVirt/RHEV 템플릿"],"Custom instance type":[""],"oVirt/RHEV instance type. Provided memory, sockets and cores values will be overriden by instance types values":[""],"Instance type":[""],"Cores per socket":["소켓당 코어 수 "],"Sockets":["소켓 "],"Highly Available":[""],"Keyboard":[""],"Vnic Profile":[""],"Interface type":[""],"Storage domain":["스토리지 도메인 "],"Uses thin provisioning if unchecked":["선택 해제되어 있을 경우 씬 프로비저닝을 사용합니다 "],"Preallocate disk":["디스크 사전 할당 "],"Wipe disk after delete":[""],"Disk interface":[""],"Bootable":["부팅가능"],"Only one volume can be bootable":["하나의 볼륨만 부팅할 수 있습니다 "],"Please Select an Image":["이미지를 선택하십시오"],"Memory (MB)":["메모리 (MB)"],"Firmware":[""],"Folder":["폴더 "],"Guest OS":["게스트 OS"],"Virtual H/W version":["가상 H/W 버전 "],"Memory hot add lets you add memory resources for a virtual machine while the machine is powered on.":["메모리 동적 추가는 가상 머신이 작동하는 동안 가상 머신의 메모리 리소스를 추가할 수 있는 기능입니다."],"Memory hot add":["메모리 동적 추가"],"CPU hot add lets you add CPU resources for a virtual machine while the machine is powered on.":["CPU 동적 추가는 가상 머신이 작동하는 동안 가상 머신의 CPU 리소스를 추가할 수 있는 기능입니다."],"CPU hot add":["CPU 동적 추가"],"Add a CD-ROM drive to the virtual machine.":[""],"CD-ROM drive":[""],"Boot order":[""],"Has effect only for network based provisioning":[""],"Annotation Notes":[""],"Import VM %s":[""],"Virtual Machines on %s":["%s 상의 가상 머신 "],"Compute Resouces":[""],"VMs":[""],"State":["상태 "],"Power":["전원"],"Hypervisor":[""],"New Virtual Machine":["새 가상 머신 "],"Properties":["속성 "],"Machine Type":["시스템 유형 "],"VCPU(s)":["VCPU"],"UUID":["UUID"],"Allocated":["할당됨 "],"Display":["표시 "],"NIC":["NIC"],"using %{allocation} GB out of %{capacity} GB, %{pool_name} storage pool":["%{capacity} GB 중 %{allocation} GB, %{pool_name} 스토리지 풀 사용 중 "],"Path":["경로"],"Running on":["실행 "],"using %s":["%s 사용 중 "],"Annotation notes":[""],"Last report":["마지막 보고 "],"Origin":[""],"Restart<br>Failures":["다시 시작<br>실패 "],"Delete report for %s?":["%s의 보고서를 삭제하시겠습니까? "],"Level":["레벨 "],"Message":["메세지 "],"Nothing to show":["표시할 것이 없습니다 "],"Reported at %s ":["%s 에 보고 "],"Host times seem to be adrift!":[""],"Host reported time is <em>%s</em>":["호스트 보고 시간은 <em>%s</em>입니다 "],"Foreman report creation time is <em>%s</em>":["Foreman 보고서 생성 시간은 <em>%s</em>입니다 "],"Which is an offset of <b>%s</b>":["<b>%s</b>의 오프셋 "],"Other reports for this host":["이 호스트의 다른 보고서 "],"Config Reports":[""],"Run Distribution Chart":[""],"Minutes Ago":["분 전 "],"Number Of Clients":["클라이언트 수 "],"Hosts in Build mode or with Build errors":[""],"No Hosts are in build mode or have build errors.":[""],"Build Duration":[""],"Token Expiry":[""],"No hosts available.":[""],"Created":["생성 일시 "],"No interesting reports received in the last week":["지난 1 주일 동안 보고서가 수신되지 않았습니다 "],"Host Configuration Chart":["호스트 설정 차트 "],"Hosts that had performed modifications without error":["오류 없이 변경한 호스트 "],"Hosts in error state":["오류 상태에 있는 호스트 "],"Good host reports in the last %s":["지난 %s의 호스트 보고서 "],"Good host with reports":[""],"Hosts with no reports":["보고서가 없는 호스트 "],"Host Configuration Status":["호스트 설정 상태 "],"Total Hosts: %s":["총 호스트: %s"],"Overview":["개요 "],"Get default dashboard widgets":["기본 대시보드 위젯 가져오기"],"%s widget loading...":[""],"DNS Domain":[""],"Full name describing the domain":["도메인을 나타내는 전체 이름 "],"Create Domain":[""],"Domain|Fullname":["성명 "],"Foreman considers a domain and a DNS zone as the same thing. That is, if you are planning to manage a site where all the machines are of the form hostname. somewhere.com then the domain is somewhere.com. This allows Foreman to associate a puppet variable with a domain/site and automatically append this variable to all external node requests made by machines at that site. The fullname field is used for human readability in reports and other pages that refer to domains, and also available as an external node parameter.":[""],"Show all %s facts with the same value":[""],"Fact Values":["정보 값 "],"FactValue|Value":["값 "],"FactValue|Origin":[""],"Reported at":["보고 "],"You don't seem to have any facts yet. If you wish to configure fact pushing, please follow the documentation.":["아직 팩트가 없습니다. 팩트 푸시를 구성하려면 설명서를 따르십시오."],"%s filters":[""],"Filters":["필터"],"Create Filter":[""],"Role":["역할 "],"Filter|Resource":["리소스 "],"Filter|Permissions":["권한 "],"Filter|Unlimited":["무제한 "],"Filter|Override":[""],"Filter|Search":["검색 "],"Disable overriding":[""],"Delete filter?":["필터를 삭제하시겠습니까?"],"Hostname":["호스트 이름 "],"<b style=\\\"color: #6bb5df;\\\">%{hosts_sum}</b>\\n <p>Changed</p>":[""],"<b style=\\\"color: #6bb5df;\\\">%{out_of_sync_sum}</b>\\n <p>Out of sync</p>":[""],"<b style=\\\"color: #6bb5df;\\\">%{disabled_sum}</b>\\n <p>Disabled</p>":[""],"message":["메세지 "],"No logs to show":["표시할 로그가 없습니다"],"Total of one host":[""],"None!":["없음!"],"Last Report":["마지막 보고 "],"<b>Foreman</b> Configuration Management Error Report":[""],"For more information":["자세한 내용은 다음을 참조하십시오."],"<b>Foreman</b> Build Complete":["<b>Foreman</b> 빌드 완료"],"IP":["IP "],"Your host has finished building:":["호스트에서 빌드가 완료되었습니다:"],"Hostname:":["호스트명:"],"IP:":["IP:"],"View in Foreman:":["Foreman에서 보기:"],"<b>Foreman</b> Configuration Management Summary":[""],"Summary from %{time} ago to now":["%{time} 전에서 현재까지의 요약"],"Summary report from Foreman server at %{foreman_url}":["%{foreman_url}의 Foreman 서버에서 가져온 요약"],"Hosts with interesting values (changed, failures etc)":["주목할 값이 있는 호스트(변경된 값, 오류 등)"],"Hosts which do not have recent reports from configuration management":[""],"Hosts which Foreman reporting is disabled":["Foreman 보고가 비활성화된 호스트"],"Hostgroup":["호스트 그룹 "],"Parent":["부모 "],"Bare Metal":["베어 메탈 "],"Deploy on":["배포 "],"IPv4 Subnet":[""],"IPv6 Subnet":[""],"Password must be 8 characters or more":["암호는 8자 이상이어야 합니다 "],"Parent Parameters":[""],"Host Group Parameters":[""],"Create Host Group":[""],"Hostgroup|Name":["이름 "],"Hosts including Sub-groups":[""],"Host Groups allow hosts with common configuration to be defined and grouped together.\\n Nested groups will inherit from their parent(s).\\n This is then treated as a template and is selectable during the creation of a new host and ensures that the host is configured in one of your pre-defined states.":[""],"Create %s":["%s 생성 "],"Select Hosts":["호스트 선택"],"Assign Selected Hosts":["선택된 호스트 지정 "],"<b class='select_count'>0</b> selected":["<b class='select_count'>0</b> 선택 "],"Assign to %s":["%s에 지정 "],"Chassis":["섀시 "],"Boot device":["부트 장치 "],"Netmask":["넷마스크 "],"MAC":["MAC"],"Gateway":["케이트웨이"],"No %s with BMC feature found, install one, enable BMC module and register it.":[""],"Smart Proxy":["스마트 프록시 "],"Missing BMC feature associated with %s.":[""],"Virtual machine settings cannot be edited on an existing machine in %s":["%s의 기존 가상 머신에서는 가상 머신 설정을 편집할 수 없습니다."],"Failed connecting to %s":["%s로 연결 실패 "],"Errors: %s":["오류: %s"],"'%{host}' not found on '%{resource}'":["'%{host}'을(를) '%{resource}'에서 찾을 수 없습니다 "],"'%{host}' could be deleted or '%{resource}' is not responding.":["'%{host}'이(가) 삭제되었거나 '%{resource}'이(가) 응답하지 않습니다."],"Conflicts have been detected":["충돌이 감지되었습니다 "],"The following entries were found conflicting with what foreman wanted to apply.":["다음 항목은 foreman이 적용하려고 한 내용과 충돌하는 것으로 발견되었습니다. "],"Please review them carefully, if you are certain that they should be removed, please click on overwrite.":["이를 주의 깊게 확인하십시오, 제거해야 할 경우 덮어쓰기를 클릭하십시오. "],"DHCP lease conflicts have been detected":["DHCP 임대 충돌이 감지되었습니다 "],"Please correct the error(s) below and submit your changes again.":["아래 오류를 수정하고 변경 사항을 다시 보내십시오. "],"Virtual Machine":["가상머신"],"Interfaces":["인터페이스 "],"Additional Information":["추가 정보 "],"This value is used also as the host's primary interface name.":["이 값은 호스트의 기본 인터페이스 이름으로도 사용됩니다."],"Deploy On":[""],"Host Parameters":["호스트 매개 변수 "],"Owned By":["소유자 "],"Hardware Model":["하드웨어 모델 "],"For initial configuration of the host run this command:":[""],"Host template":[""],"This host can not be configured as no registration template was set.":[""],"Some of the interfaces are invalid. Please check the table below.":["일부 인터페이스는 사용할 수 없습니다. 아래 표를 확인하십시오."],"Identifier":["식별자 "],"IPv4 Address":["IPv4 주소 "],"FQDN":["FQDN"],"Ok":["확인"],"<b class='select_count'>0</b> of <b>%s</b> selected":[""],"Select all items on this page":[""],"items selected. Uncheck to Clear":["항목이 선택되어 있습니다. 삭제하려면 선택 해제합니다 "],"Model":["모델 "],"Please Confirm":["확인해 주십시오 "],"Report Status":["보고서 상태 "],"MTU":[""],"Provisioning Method":["프로비저닝 방법 "],"Password must be 8 characters or more.":[""],"The password is currently set by %s.":[""],"Resolve":["문제 해결 "],"Display the templates that will be used to provision this host":["호스트 프로비저닝에 사용할 템플릿 표시 "],"in Progress":["진행 중 "],"in progress":["진행 중"],"Templates resolved for this operating system":["이 운영 체제에 대해 확인된 템플릿"],"Number of Events":["이벤트 수 "],"Time in Seconds":["시간 (초) "],"Remember hosts selection for the next bulk action":[""],"Fix %s on Mismatch":["불일치로 인해 %s 수정"],"Fail on Mismatch":["불일치로 인해 실패 "],"Template Type":["템플릿 유형 "],"Review":["확인 "],"Safemode Review":[""],"Assign Hosts to %s":["%s에 호스트 지정 "],"Clone Host %s":["호스트 %s 복제 "],"Generated %s ago":["%s 전에 생성 "],"Back to host":["호스트로 돌아가기 "],"Console output may be out of date":["콘솔 출력이 오래된 것일 수 있습니다 "],"Ctrl-Alt-Del":["Ctrl-Alt-Del"],"Connecting (unencrypted) to: %s":["다음에 연결 중 (암호화 해제): %s"],"VMRC Console":[""],"To launch the VMRC console, you need the VMRC software installed.":[""],"Download VMRC":[""],"Launch Console":[""],"Opening VMRC Console":[""],"Unmanage host":["관리되지 않는 호스트 "],"Manage host":["호스트 관리 "],"Disassociate host":["호스트 연결 해제 "],"Single host on this page is selected.":[""],"Select this host":[""],"Provision":["프로비저닝 "],"these hosts for a build operation on next boot":["다음 부팅 시 빌드 작업을 위한 호스트 "],"Reboot now":["지금 다시 시작 "],"This <b>will delete</b> the linked VMs and their disks, and is irreversible.":[""],"It is irreversible, but VMs and their disks <b>will not be deleted</b>.":[""],"This might take a while, as all hosts, facts and reports <b>will be deleted</b> as well. %s This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Disable alerts for selected hosts":["선택한 호스트의 통지 비활성화 "],"Disassociate the selected hosts from their VMs":["VM에서 선택된 호스트의 연결을 해제 "],"The list is excluding %{count} %{link_start}physical host%{link_end}.":[""],"Enable alerts for selected hosts":["선택한 호스트의 통지 활성화 "],"Sorry, these hosts do not have parameters assigned to them, you must add them first.":["죄송합니다. 이 호스트에 할당된 매개 변수가 없습니다. 먼저 매개 변수를 추가해야 합니다. "],"Enable this host for provisioning":["프로비저닝을 위해 호스트 활성화 "],"What ever text(or ERB template) you use in here, would be used as your OS disk layout options If you want to use the partition table option, delete all of the text from this field":["여기에서 사용하는 텍스트 (또는 ERB 템플릿)가 무엇이든 이는 OS 디스크 레이아웃 옵션으로 사용됩니다. 파티션 테이블 옵션을 사용하고자 할 경우 필드에서 모든 텍스트를 삭제합니다."],"List of hosts which answer to the provided query":["제공되는 쿼리에 응답하는 호스트 목록 "],"Rebuild orchestration configuration":["오케스트레이션 구성 다시 빌드"],"The following errors may prevent a successful build:":["다음과 같은 오류로 인해 빌드가 정상적으로 진행되지 않을 수 있습니다: "],"Check again":["다시 확인 "],"Edit Host":["호스트 편집 "],"Select host group":["호스트 그룹 선택 "],"*Clear host group*":["*호스트 그룹 삭제*"],"Select Location":["위치 선택 "],"Select Organization":["조직 선택 "],"select an owner":["소유자 선택 "],"Select desired state":["원하는 상태 선택"],"Details":["상세 정보 "],"Metrics":["메트릭스 "],"VM":["VM"],"NICs":["NIC"],"Loading host information ...":["호스트 정보 로딩 중 ..."],"No puppet activity for this host in the last %s days":["지난 %s 일 동안 이 호스트의 puppet 활동이 없습니다 "],"Loading template information ...":["템플릿 정보 로딩 중 ..."],"Loading VM information ...":["VM 정보 로딩 중 ..."],"Loading NICs information ...":["NIC 정보 로드 중 ..."],"Loading BMC information ...":["BMC 정보 로딩 중 ..."],"Loading runtime information ...":["런타임 정보 로딩 중 ..."],"Resources":["리소스"],"Loading resources information ...":["리소스 정보 로딩 중 ..."],"Review build status for %s":["%s의 빌드 상태 확인 "],"Warning: This will delete this host and all of its data!":["경고: 이 호스트와 호스트의 데이터가 모두 삭제됩니다!"],"This host's stored facts and reports will be deleted too.":["호스트의 저장된 팩트 및 보고서도 삭제됩니다. "],"Please wait while your request is being processed":["요청을 처리하는 동안 잠시 기다려 주십시오."],"The following hosts were updated":["다음 호스트가 업데이트되었습니다 "],"The following parameters were skipped as they did not exists on this host:":["다음의 매개 변수는 호스트에 존재하지 않아 생략되었습니다: "],"Back to host list":["호스트 목록으로 돌아가기 "],"You don't have any visible hosts. Hosts can be added and provisioned from Foreman, or configured to report to Foreman.":["표시 가능한 호스트가 없습니다. Foreman에서 호스트를 추가하거나 프로비저닝할 수 있습니다. 또는 Foreman에 보고하도록 호스트를 구성할 수 있습니다."],"Please note that these HTTP proxy configurations are only used for requests\\n from Foreman or Foreman plugins. System-wide proxies must be configured at operating system level.":[""],"URL of the proxy including schema (https://proxy.example.com:8080)":[""],"Username to use if authentication is required.":[""],"Password to use if authentication is required.":[""],"SSL CA Certificate to use if authentication is required.":[""],"Test URL":[""],"New HTTP Proxy":[""],"Defining HTTP Proxies that exist on your network allows you to perform various actions through those proxies.":[""],"Image|Name":["이름 "],"Image|Username":["사용자 이름 "],"Image|Uuid":["UUID"],"Image|User Data":[""],"Destroy":["삭제 "],"The user that is used to ssh into the instance, normally cloud-user, ec2-user, ubuntu, root etc":["ssh를 인스턴스에 사용하는 사용자는 일반적으로 cloud-user, ec2-user, ubuntu, root 등 입니다"],"Does this image support user data input (e.g. via cloud-init)?":["이 이미지는 사용자 데이터 입력 (예: cloud-init 통해)을 지원하고 있습니까?"],"(optional) IAM Role for Fog to use when creating this image.":["(옵션) 이미지를 생성할 때 사용할 Fog의 IAM 역할입니다. "],"Password to authenticate with - used for SSH finish step.":["인증에 사용될 암호 - SSH 마지막 단계에서 사용됩니다."],"Image path":["이미지 경로 "],"Full path to backing image used to create new volumes.":["새 볼륨을 생성하는데 사용되는 백업 이미지로의 전체 경로입니다."],"Path to template, relative to datacenter (e.g. My templates/RHEL 6)":["데이터 센터 관련 템플릿으로의 경로 (예: My templates/RHEL 6)"],"SSH keys for: %s":[""],"Download":["다운로드 "],"Recreate":[""],"When using SSH based provisioning, a special SSH key is created in order to automate the provisioning process.":[""],"Normally when setting up a Compute Resource, a key pair (private and public) is created for you automatically.":[""],"However, if it was deleted externally this page helps you to recreate it":[""],"New SSH key":[""],"You are using an unsupported browser.":["지원되지 않는 브라우저를 사용하고 있습니다."],"Login":["로그인 "],"Parameter Details":[""],"Puppet Environments":["Puppet 환경"],"Default Behavior":[""],"Override the default value of the Puppet class parameter.":["Puppet 클래스 매개 변수의 기본값을 덮어씁니다."],"Whether the class parameter value is managed by Foreman.":["클래스 매개 변수 값을 Foreman에서 관리하는지 여부"],"Value to use when there is no match.":["일치하지 않는 경우 사용할 값입니다."],"Omit":[""],"Hidden Value":[""],"Hide all values for this parameter.":["이 매개 변수의 값을 모두 숨깁니다."],"Optional Input Validator":[""],"If ERB is used in a parameter value, the validation of the value will happen during the ENC request. If the value is invalid, the ENC request will fail.":["매개 변수 값에 ERB를 사용하는 경우 ENC 요청 시에 값을 검증합니다. 값이 잘못된 경우 ENC 요청이 실패합니다."],"If checked, will raise an error if there is no default value and no matcher provide a value.":["체크되어 있을 경우 기본값이 없고 matcher가 값을 지정하지 않을 경우 오류가 표시됩니다."],"Prioritize Attribute Order":[""],"Set the order in which values are resolved.":["값을 확인하는 순서를 설정합니다."],"Order":["순서"],"The order in which matchers keys are processed, first match wins.<br> You may use multiple attributes as a matcher key, for example, an order of <code>hostgroup,environment</code> would expect a matcher such as <code>hostgroup,environment = example-group,production</code>":[""],"Continue to look for matches after first find (only array/hash/json/yaml type)? Note: merging overrides ignores all matchers that are omitted.":[""],"Include default value when merging all matching values.":["일치하는 모든 값을 병합할 때 기본값을 포함합니다."],"Avoid duplicate values when merging them (only array type)?":["값을 병합할 때 중복 값을 제외하시겠습니까(배열 유형만)?"],"Specify Matchers":[""],"Remove Matcher":[""],"Attribute type":["속성 유형"],"Matcher is a combination of an attribute and its value, if they match, the value below would be provided.<br> You may use any attribute Foreman knows about, such as facts etc for example: <code> domain = example.com </code> or <code> is_virtual = true</code>.":["일치 조건은 속성과 해당 값의 조합입니다. 일치하는 경우 아래의 값이 제공됩니다.<br> 팩트와 같이 Foreman에 알려진 속성을 모두 사용할 수 있습니다. 예: <code> domain = example.com </code> 또는 <code> is_virtual = true</code>."],"Explain matchers":["매처 (Matcher) 설명 "],"Add Matcher":["일치 조건 추가"],"add a new matcher":["새 일치 조건 추가"],"Medium":["미디어 "],"The path to the medium, can be a URL or a valid NFS server (exclusive of the architecture).\\n for example <em>http://mirror.centos.org/centos/$version/os/$arch</em> where <strong>$arch</strong> will be substituted for the host's actual OS architecture and <strong>$version</strong>, <strong>$major</strong> and <strong>$minor</strong> will be substituted for the version of the operating system. Solaris and Debian media may also use <strong>$release</strong>.":["미디어에 대한 경로로, URL이거나 유효한 NFS 서버일 수 있습니다(아키텍처 제외).\\n 예: <em>http://mirror.centos.org/centos/$version/os/$arch</em> 여기서 <strong>$arch</strong>는 호스트의 실제 OS 아키텍처로 대체되며, <strong>$version</strong>, <strong>$major</strong> 및 <strong>$minor</strong>는 운영 체제의 버전으로 대체됩니다. Solaris 및 Debian 미디어의 경우 <strong>$release</strong>도 사용할 수 있습니다."],"The NFS path to the media.":["미디어로의 NFS 경로입니다. "],"The NFS path to the jumpstart control files.":["jumpstart 제어 파일로의 NFS 경로입니다. "],"The NFS path to the image directory.":["이미지 디렉토리로의 NFS 경로입니다. "],"Choose a family":["제품군 선택 "],"Operating System Family":["운영 체제 제품군 "],"Create Medium":[""],"Medium|Name":["이름 "],"Medium|Path":["경로 "],"Medium|OS Family":[""],"Create Installation Medium":[""],"Installation medium configuration":["설치 미디어 설정 "],"A medium represents the source of one or more operating system's installation files, accessible via the network.\\n It will probably be a mirror from the internet or a copy of one or more CD or DVDs.":["미디어는 네트워크를 통해 액세스되는 하나 이상의 운영 체제 설치 파일의 소스를 나타냅니다.\\n 인터넷의 미러이거나 CD 또는 DVD 하나 이상의 사본인 경우가 많습니다."],"For example, if you have copied several Red Hat release disks into a directory structure where the disk images are named 5.8 or 6.2, and each contained both x86_64 and i386 binaries, then you\\n could create a single medium entry describing them all.\\n The entry, which could be just named 'Red Hat' could contain a path like this <em>'http://server/redhat/$version/$arch'</em>":["예를 들어 여러 개의 Red Hat 릴리즈 디스크를 5.8 또는 6.2라는 이름의 디스크 이미지가 있는 디렉토리 구조에 복사했고 각각에 x86_64 및 i386 바이너리가 모두 포함되어 있는 경우\\n 이러한 모든 이미지를 설명하는 단일 미디어 항목을 생성할 수 있습니다.\\n 이 항목에 'Red Hat'이라는 이름을 지정하여 <em>'http://server/redhat/$version/$arch'</em>와 같은 경로를 포함할 수 있습니다."],"The keywords <b>$version</b>, <b>$major</b> and <b>$minor</b> will be interpolated back into the path specification to calculate the true URL address.":["키워드 <b>$version</b>, <b>$major</b>, <b>$minor</b>는 URL 주소를 계산하기 위해 경로 사양에 다시 삽입합니다."],"You may also associate one or more operating systems with this medium or alternatively set this up later on the %s page.":["하나 이상의 운영 체제를 이 미디어에 연결하거나 이를 %s 페이지에서 나중에 설정할 수 있습니다. "],"Operating systems":["운영 체제 "],"The class of CPU supplied in this machine. This is primarily used by Sparc Solaris builds and can be left blank for other architectures. The value can be determined on Solaris via uname -m":["이 시스템에 제공되는 CPU 클래스입니다. 이는 주로 Sparc Solaris 빌드에 사용되며 다른 아키텍처의 경우 빈 칸으로 둡니다. 값은 uname -m을 사용하여 Solaris에서 확인할 수 있습니다. "],"The class of the machine reported by the Open Boot Prom. This is primarily used by Sparc Solaris builds and can be left blank for other architectures. The value can be determined on Solaris via uname -i|cut -f2 -d,":["Open Boot Prom에서 보고되는 시스템 클래스입니다. 이는 주로 Sparc Solaris 빌드에 사용되며 다른 아키텍처의 경우 빈 칸으로 둡니다. 값은 uname -i|cut -f2 -d를 사용하여 Solaris에서 확인할 수 있습니다. "],"General useful description, for example this kind of hardware needs a special BIOS setup":["이러한 하드웨어 종류에 특정 BIOS 설정이 필요하다와 같은 일반적으로 유용한 설명입니다 "],"Create Model":[""],"Media access control address for this interface. Format must be six groups of two hexadecimal digits <br/> separated by colons (:), e.g. 00:11:22:33:44:55. Most virtualization compute resources (e.g. VMware, oVirt, libvirt) <br/> will provide new random MAC address.":[""],"Device Identifier":[""],"Device identifier for this interface. This may be different on various platforms and environments, here are some common examples.<br/><ul><li>Use the basic name for physical interface identifiers, e.g. <strong>eth0</strong> or <strong>em0</strong> with biosdevname.</li><li>For virtual interfaces, use either alias notation (<strong>eth0:1</strong>, name:index) or VLAN notation (<strong>eth0.15</strong>, name.tag).</li><li>For bonds it's common to use <strong>bond0</strong> on Linux, <strong>lagg0</strong> on FreeBSD systems.</li></ul>":["이 인터페이스의 장치 ID입니다. 이는 다양한 플랫폼 및 환경에서 다를 수 있습니다. 다음은 일반적인 예입니다.<br/><ul><li>biosdevname과 함께 <strong>eth0</strong> 또는 <strong>em0</strong>와 같이 물리적 인터페이스 ID의 기본 이름을 사용합니다.</li><li>가상 인터페이스의 경우 별칭 표기 (<strong>eth0:1</strong>, name:index) 또는 VLAN 표기 (<strong>eth0.15</strong>, name.tag) 중 하나를 사용합니다.</li><li>본딩의 경우 Linux에서는 <strong>bond0</strong>를 사용하고 FreeBSD 시스템에서는 <strong>lagg0</strong>를 사용합니다.</li></ul>"],"DNS Name":[""],"Primary interface's DNS name and domain define host's FQDN":["기본 인터페이스의 DNS 이름 및 도메인으로 호스트의 FQDN이 정의됩니다."],"No domains":["도메인 없음 "],"IPv4 Subnet with associated TFTP smart proxy is required for PXE based provisioning.":[""],"An IP address will be auto-suggested if you have enabled IPAM on the IPv4 subnet selected above.<br/><br/>The IP address can be left blank when:<br/><ul><li>provisioning tokens are enabled</li><li>the domain does not manage DNS</li><li>the subnet does not manage reverse DNS</li><li>and the subnet does not manage DHCP reservations</li></ul>":[""],"IP address auto-suggest":["IP 주소 자동 제시 "],"An IP address will be auto-suggested if you have enabled IPAM on the IPv6 subnet selected above.":[""],"If the Managed flag is enabled, external services such as DHCP, DNS, and TFTP will be configured according to the information provided.":[""],"The services to be configured are determined by the subnet and domain that are selected for this interface. If you want to manage<br/> only a subset of these services, change the %{subnet} and %{domain} proxies configuration. When a proxy is set to 'None', the corresponding":[""],"service configuration will be skipped.":[""],"If the Managed flag is disabled, none of the services will be configured for this interface, even if it is configured for the subnet and domain.":[""],"The Managed flag also determines whether the interface should be configured during host provisioning, so that the configuration remains after reboot.":[""],"The Primary interface is used for constructing the FQDN of the host.":[""],"This interface is also used for network communication during provisioning, e.g. downloading installation packages.":[""],"The Provisioning interface is used for TFTP configuration for PXE boot based on this interface MAC address.":[""],"For image based provisioning using finish template, this interface's IP will be used as the SSH target.":[""],"from profile %s":["%s 프로파일에서"],"Inherits from subnet VLAN ID if not set":["설정되어 있지 않은 경우 서브넷 VLAN에서 상속 "],"Identifier of the interface to which this interface belongs, e.g. eth1":["이 인터페이스가 속한 인터페이스의 ID (예: eth1) "],"The BMC password will be used by Foreman to access the host's BMC controller via a BMC-enabled smart proxy, if available.<br/>":[""],"The password will also be accessible to other users via templates and in the ENC YAML output; disable the bmc_credentials_accessible setting to prevent access.":[""],"The password will not be accessible to other users; enable the bmc_credentials_accessible setting to permit access via templates and in the ENC YAML output.":[""],"BMC password usage":[""],"comma separated interface identifiers":["콤마로 구분된 인터페이스 ID "],"space separated options, e.g. miimon=100":["공백으로 구분된 옵션 (예: miimon=100)"],"Virtual NIC":["가상 NIC"],"Enable if this is an alias or VLAN interface, note that alias can be used only with static boot mode subnet":["별칭 또는 VLAN 인터페이스인 경우 활성화합니다. 별칭은 정적 부팅 모드 서브넷에만 사용할 수 있습니다."],"OS name from facter; e.g. RedHat":["정보에서 OS 이름, 예: RedHat"],"OS major version from facter; e.g. %s":[""],"OS minor version from facter; e.g. %s":[""],"OS friendly name; e.g. RHEL 6.5":["OS 이름; 예: RHEL 6.5"],"Family":["제품군 "],"Root Password Hash":[""],"Hash function to use. Change takes effect for new or updated hosts.":["사용할 해시 함수입니다. 새로운 또는 업데이트된 호스트의 변경 사항이 적용됩니다. "],"It is not possible to assign provisioning templates at this stage.":["이 단계에서는 프로비저닝 템플릿을 할당할 수 없습니다."],"Please save the Operating System first and try again.":["운영 체제를 저장하고 다시 시도하십시오. "],"No templates found!":["템플릿을 찾을 수 없습니다! "],"You probably need to configure your %s first.":["%s을(를) 먼저 구성해야 합니다."],"Clone %s":["%s 복제 "],"Create Operating System":[""],"Operatingsystem|Title":["제목 "],"The Operating systems detail the OSs known to Foreman, and is the central point that the other required components tie into.":[""],"Remove Combination":[""],"Valid Host Groups":[""],"Add Combination":[""],"Association":["연결 "],"Snippet":["조각 모음 "],"Applicable Operating Systems":[""],"Template diff":["템플릿 차이 "],"Create Template":[""],"Build PXE Default":["PXE 기본값 빌드 "],"You are about to change the default PXE menu on all configured TFTP servers - continue?":["구성된 모든 TFTP 서버에 있는 기본 PXE 메뉴가 변경됩니다. 계속하시겠습니까?"],"ProvisioningTemplate|Name":["ProvisioningTemplate|이름"],"Host Group / Environment":[""],"Kind":["종류 "],"ProvisioningTemplate|Snippet":["ProvisioningTemplate|조각 모음"],"ProvisioningTemplate|Locked":["ProvisioningTemplate|잠김"],"This template is locked for editing.":["이 템플릿은 편집 용으로 잠금되어 있습니다. "],"The Provision Templates is the core of Foreman’s flexibility to used for provisioning and installation of operating systems. There are several types of template, along with a flexible matching system to deliver different templates to different hosts or host groups.":[""],"Create Provisioning Template":[""],"Create Partition Table":[""],"Ptable|Name":["이름 "],"Ptable|OS Family":[""],"Ptable|Snippet":["Ptable|조각 모음"],"Ptable|Locked":["Ptable|잠김"],"Partition templates describe the partition layout, with just a different disk layout to account for different server capabilities.":[""],"CA Certificate Expiry Date":[""],"Filter by state:":["상태를 기준으로 필터링:"],"Valid from":["유효 기간 시작 "],"Expires":["만료 "],"Sign":["로그인 "],"Revoke":["취소"],"Realm name, e.g. EXAMPLE.COM":["영역 이름 예: EXAMPLE.COM"],"Realm Type":[""],"Type of realm, e.g. FreeIPA":["영역 유형 (예: FreeIPA) "],"Create Realm":[""],"Realm|Name":["이름 "],"Foreman supports automatically creating realm entries for new hosts. When a realm is selected for a host, Foreman contacts the relevant realm smart proxy to create an entry for the host and retrieve it's one-time registration password.":[""],"Report completed":[""],"The report %{name} that was requested at %{time} has been generated%{compression} and attached to this email.":[""],"compresed":[""],"Generating the report took %s.":[""],"Generate a Report":[""],"Generating a report":[""],"This will generate a report %s. Based on its definition, it can take a long time to process.":[""],"Generate at":[""],"Generate report on a given time.":[""],"Send report via e-mail":[""],"By checking this, the report will be sent to e-mail address specified below. Keep unchecked if you prefer to download the report in your browser.":[""],"Deliver to e-mail addresses":[""],"Valid e-mail addresses delimited by \\\"%s\\\"":[""],"Output format":[""],"If the template supports format selection, user can choose preferred format.<br> Typically the template needs to use report_render macro.<br><br>If usage of this macro is not found in the template,<br>this field is disabled and the output format defaults to plain text.<br><br>If the template supports filter selection, but does not use the report_render macro,<br>in order to enable this field, add a comment to the template mentioning report_render macro name.":[""],"Display advanced fields":["고급 필드 표시"],"Hide advanced fields":["고급 필드 숨기기"],"ReportTemplate|Name":[""],"ReportTemplate|Snippet":[""],"ReportTemplate|Locked":[""],"Download generated report":[""],"The Report Templates provides a way to create textual reports out of Foreman data. When the template is rendered, it loads data from database and renders the result. Based on the template, the output format can be csv, json, yaml or any custom textual format":[""],"Create Report Template":[""],"Changes to organizations and locations will propagate to all inheriting filters":[""],"This role has been cloned from role %s":[""],"When the role's associated %{taxonomies} are changed,<br> the change will propagate to all inheriting filters.\\n Filters that are set to override <br> will remain untouched. Overriding of role filters can be easily disabled by <br> pressing the \\\"Disable overriding\\\" button.\\n Note that not all filters support <br>%{taxonomies}, so these always remain global.":[""],"locations":["위치 "],"Role locations":[""],"organizations":["조직 "],"Role organizations":[""],"Please save the role first. You can edit it later to add filters":["먼저 역할을 저장하십시오. 필터를 추가하기 위해 나중에 편집할 수 있습니다 "],"Loading filters ...":["필터 로드 중 ..."],"New filter":["새 필터 "],"Disable all filters overriding":[""],"Create Role":[""],"Role|Name":["이름 "],"Role|Description":[""],"Role|Locked":[""],"This role is locked for editing.":[""],"Add filter":["필터 추가 "],"Test email":["테스트 이메일"],"Send a test message to the current user's email address to confirm the configuration is working.":[""],"Search error":[""],"Must be unique":[""],"HTTPS endpoint":[""],"Hostname and client certificate must be valid. Ports are typically 8443 or 9090.":[""],"Create Smart Proxy":[""],"SmartProxy|Name":["이름 "],"%s Log Message":[""],"%s error message":[""],"%s warning message":[""],"No Failed Features":[""],"Filter by level:":["레벨을 기준으로 필터링:"],"Time":["시간 "],"Log entry details":["로그 항목 정보"],"Local time":["현지 시간"],"GMT time":["GMT 시간"],"Backtrace":["역추적"],"%s Active Feature":[""],"Failed features: %s":[""],"Create Proxy":[""],"Autosign entries":["자동 서명 항목"],"Hosts managed:":["관리되는 호스트:"],"TFTP server":["TFTP 서버"],"Services":["서비스 "],"Communication status":["통신 상태"],"Active features":["활성 기능"],"Hosts managed":["관리되는 호스트"],"Failed features":["실패한 기능"],"Smart proxies provide a RESTful API to manage subsystems like DNS, DHCP, and TFTP.":[""],"Length":[""],"You can add SSH public keys to a user in Foreman.":[""],"The keys can be used in provisioning templates and are also available for configuration management tools managed by Foreman.":[""],"Add SSH key":[""],"In order to add the SSH key, the user must be saved first. A 'create_ssh_keys' permission is required too.":[""],"Add SSH Key":[""],"Network Address":[""],"Network Prefix":[""],"While it is possible to define the same DHCP range in Foreman, it's usually good practice to select a range from outside the pool defined in the installer, but still in the subnet":[""],"For the example above, it is recommended to define the DHCP range from 10.0.0.1 to 10.0.0.99 in the Foreman UI which gives the following IP address distribution:":[""],"10.0.0.1 - 10.0.0.99 - addresses reserved during bare-metal provisioning by Foreman":[""],"10.0.0.100 - 10.0.200 - addresses for dynamic clients in the subnet (discovered hosts, unmanaged hosts)":[""],"More about this in ":[""],"manual":[""],"DHCP range in Foreman":[""],"Prefix length for this subnet, e.g. 24":[""],"Network Mask":[""],"Gateway Address":[""],"Optional: Gateway for this subnet":["옵션: 이 서브넷의 게이트웨이 "],"Primary DNS Server":[""],"Optional: Primary DNS for this subnet":["옵션: 서브넷의 1차 DNS"],"Secondary DNS Server":[""],"Optional: Secondary DNS for this subnet":["옵션: 서브넷의 2차 DNS "],"IPAM":["IPAM"],"You can select one of the IPAM modes supported by the selected IP protocol:":[""],"will manage the IP on DHCP through assigned DHCP proxy, auto-suggested IPs come from DHCP":[""],"use internal DB to auto-suggest free IP based on other interfaces on same subnet respecting range if specified, useful mainly with static boot mode":[""],"preserves natural ordering":[""],"same as Internal DB but randomizes results to prevent race conditions":[""],"will assign the IPv6 address based on the MAC address of the interface":[""],"will auto-suggest the next available address via an External IPAM Smart-proxy plugin (IPv4, IPv6)":[""],"leave IP management solely on user, no auto-suggestion":[""],"IP Address Management":["IP 주소 관리"],"Optional: Starting IP Address for IP auto suggestion":["옵션: IP 자동 제안의 시작 IP 주소 "],"Optional: Ending IP Address for IP auto suggestion":["옵션: IP 자동 제안의 종료 IP 주소 "],"External IPAM Group":[""],"Optional: The group/section of subnets in External IPAM to associate this subnet with":[""],"Optional: VLAN ID for this subnet":["옵션: 서브넷의 VLAN ID"],"Link Delay":[""],"Delay network activity during install for X seconds":[""],"Boot Mode":[""],"Default boot mode for interfaces assigned to this subnet, applied to hosts from provisioning templates":[""],"Proxies":["프록시 "],"The following IPv4 subnets have been found. Please review the details before creating them.":[""],"Create Subnet":[""],"Subnet|Name":["이름 "],"Subnet|Network":["네트워크 "],"Subnet|Vlanid":["Vlanid"],"Foreman can store information about the networking setup of a host that it’s provisioning, which can be used to configure the virtual machine, assign the correct IP addresses and network resources, then configure the OS correctly during the provisioning process.":[""],"Select organizations":["조직 선택 "],"Select locations":["위치 선택 "],"Parent parameters":["부모 매개 변수"],"Location parameters":["위치 매개 변수"],"Organization parameters":["조직 매개 변수"],"Default on login":["기본값 로그인 "],"Edit Properties":["속성 편집"],"Assigning hosts to %{taxonomy_name} will also update %{taxonomy_name} to include all the resources that the selected hosts are currently using.":["호스트를 %{taxonomy_name}에 할당하여 선택한 호스트가 현재 사용하고 있는 모든 리소스를 포함하도록 %{taxonomy_name} 을 업데이트합니다."],"Assign All":["전부 할당"],"Assign the %{count} host with no %{taxonomy_single} to %{taxonomy_name}":["%{taxonomy_single}이 없는 %{count} 호스트를 %{taxonomy_name}에 할당합니다 "],"Manually Assign":["수동 할당 "],"Manually select and assign hosts with no %s":["%s이(가) 없는 호스트를 수동으로 선택 및 할당합니다 "],"Proceed to Edit":["편집 실행 "],"Skip assign hosts and proceed to edit %s settings":["호스트 할당 건너뛰고 %s 설정 편집을 진행합니다 "],"Fix Mismatches":["불일치 수정 "],"Mismatches Report":["불일치 보고서 "],"There is":["다음과 같습니다 "],"%{count} host with no %{taxonomy_single} assigned":["%{taxonomy_single}이(가) 할당되지 않은 %{count} 호스트 "],"Taxonomy|Name":["이름 "],"%{taxonomy_type} %{taxonomy_name} has %{count} host that will need to be reassociated after deletion. Delete %{taxonomy_name2}?":[""],"Select hosts to assign to %s":["%s에 할당할 호스트 선택 "],"Mismatches":["불일치 "],"Fix All Mismatches":["모든 불일치 수정 "],"Location/Organization":["위치/조직 "],"Mismatch Details":["불일치 상세 정보 "],"No hosts are mismatched!":["불일치하는 호스트가 없습니다!"],"All hosts data matches configurations for locations and organizations.":["전체 호스트 데이터는 위치 및 조직의 설정과 일치합니다."],"History":["기록 "],"The template is associated to at least one host in build mode. To apply the change, disable and enable build mode on hosts to update the live templates or choose to %s their configuration from 'Select Action' menu":["이 템플릿은 빌드 모드 상태인 하나 이상의 호스트에 연결되어 있습니다. 변경 사항을 적용하려면 호스트에서 빌드 모드를 비활성화한 후 다시 활성화하여 라이브 템플릿을 업데이트하거나 '작업 선택' 메뉴에서 호스트의 구성을 %s하도록 선택하십시오."],"recreate":["재생성"],"Audit Comment":["감사 코멘트 "],"The Audit Comment field is saved with the template auditing to document the template changes":["감사 코멘트 필드는 템플릿 변경을 문서화하기 위한 템플릿 감사와 함께 저장됩니다 "],"Template inputs":[""],"Inputs can be used to parametrize templates during rendering \\\\\\n based on template type, it allows to fetch the value from host facts, \\\\\\n host parameterization or ask user interactively. To use value loaded \\\\\\n via input, use <code>input('name')</code> global macro. The template needs to be \\\\\\n saved before input macro can load the value. If the value is not available during\\n template preview, its value is expanded to <code>$TYPE_INPUT[name]</code> string.</p>":[""],"Add Input":["입력 추가"],"add a input for this template":["이 템플릿에 대한 입력을 추가합니다."],"Template syntax":[""],"Templates are generated using the Embedded Ruby (ERB) language.":[""],"The following table and example snippet shows global methods, variables and class methods and how to use them.":[""],"These are guaranteed to work via the safe mode rendering, to ensure a template can do nothing harmful.":[""],"To enable safe mode, navigate to Settings page and enable Safemode rendering option.":[""],"For more info visit:":[""],"our templates documentation":[""],"and":["및 "],"DSL (Domain Specific Language) documentation":[""],"Examples":["예제 "],"Comments":["코멘트"],"In-line code syntax":[""],"Printing data":[""],"Variables":["변수 "],"Calling methods on objects":[""],"Safe mode methods":[""],"Global macros":[""],"Iterating":[""],"Once you define a template input in Inputs tab and save the template, it can be used in the ERB.\\n To load value specified through this input, use global macro %{example1} and pass the input\\n name as an argument. E.g. %{example2} will load the value through input called cpus.":[""],"While rendering the template in preview mode, the input either loads the value or uses a placeholder\\n if the input is not ready for the rendering. If the template is rendered for real and the input is\\n not ready, an error is raised. The readyness criteria differs per input type, e.g. for Fact Inputs\\n linked to host's fact with name \\\"cpu_count\\\" is ready when %{example1} facts contains value\\n for such fact. To load this value into the template, following code can be used %{example2}\\n Note that the fact name can differ from input name.":[""],"Safe mode methods and variables":[""],"Class":["클래스 "],"Allowed methods or members":[""],"Global methods (macros)":[""],"Global variables":[""],"No comment provided":[""],"Revert":["되돌리기 "],"No history found":["기록을 찾을 수 없음 "],"Save something and try again":["저장 후 다시 시도하십시오 "],"Host has no provisioning interface defined":["호스트에 프로비저닝 인터페이스가 정의되어 있지 않습니다."],"Host has no IPv4 or IPv6 address defined":[""],"Host has no subnet defined":["호스트에 지정된 서브넷이 없습니다 "],"Host has no domain defined":["호스트에 지정된 도메인이 없습니다 "],"Host bootdisk does not work with static IPv6":[""],"Both IP and Subnet must be set":[""],"At least one of the hosts couldn't be found":[""],"<b>Foreman</b> test email":["<b>Foreman</b> 테스트 이메일"],"This is a test message to confirm that Foreman's email configuration is working.":["Foreman의 이메일 구성이 올바른지를 확인하는 테스트 메시지입니다."],"Your Foreman user account has been created:":["Foreman 사용자 계정이 생성되었습니다: "],"Username":["사용자 이름 "],"Please login to %{foreman_url} to change your password":["%{foreman_url}에 로그인하여 암호를 변경하십시오 "],"External user group":["외부 사용자 그룹 "],"remove external user group":[""],"User Group":[""],"External Groups":["외부 그룹"],"Only internal (non-LDAP) users can be added manually. LDAP users\\n are automatically synced from the External Groups list.":[""],"To refresh the list of users, click on the tab \\\"External\\n groups\\\" then \\\"Refresh\\\".":[""],"Usergroup|Name":["이름 "],"Usergroup|Auth source":["인증 소스 "],"Synchronize group from authentication source":["인증 소스에서 그룹 동기화 "],"Show linked external user groups":["링크된 외부 사용자 그룹 표시 "],"Add external user group":["외부 사용자 그룹 추가 "],"link external user group with this user group":["외부 사용자 그룹이 이 사용자 그룹에 연결되어 있습니다 "],"Create User Group":[""],"Create User group":[""],"With user groups, you can group your users and assign them roles on a group basis.\\n User groups enable users to log into Foreman and be automatically granted permissions.\\n A Foreman user group can be associated to a group stored in an LDAP server, so membership of the LDAP group automatically adds the user to the Foreman user group.":[""],"Mail query":[""],"Email Preferences":["이메일 기본 설정"],"SSH Keys":[""],"Personal Access Tokens":[""],"Language":["언어"],"Authorized by":["승인자 "],"Current password":["현재의 비밀번호"],"Send a test message to the user's email address to confirm the configuration is working.":["사용자의 이메일 주소로 테스트 메시지를 보내 구성이 올바른지 확인합니다."],"Please save the user first before assigning mail notifications.":["메일 알림을 할당하기 전 먼저 사용자를 저장하십시오."],"Notifications can't be assigned to this user.":[""],"Admin rights are currently inherited from a user group":[""],"Roles from user groups":[""],"This group has no roles":[""],"No emails":["이메일이 없음"],"Version %{version}":["버전 %{version}"],"Create User":["사용자 생성"],"User|Login":["로그인 "],"User|Firstname":["이름 "],"User|Lastname":["성 "],"User|Mail":["메일 "],"User|Admin":["관리자 "],"User|Last login on":["마지막 로그인 "],"Are you sure you want to log out?":[""],"Puppet summary":[""],"Welcome":["환영합니다"],"Host built":[""],"Tester":[""],"Puppet error state":[""],"A summary of eventful configuration management reports":[""],"A mail a user receives upon account creation":[""],"A summary of audit changes report <br> Filtered by a query if needed":[""],"A notification when a host finishes building":[""],"A test message to check the email configuration is working":[""],"A notification when a host reports a configuration error":[""],"Unable to create mail notification: %s":[""],"%{subject} has been provisioned successfully":[""],"%{subject} has been deleted successfully":[""],"Community":[""],"RSS post message goes here":[""],"Deprecations":[""],"The %{setting} setting has been deprecated and will be removed in version %{version}":[""],"Support for %{feature} has been deprecated and will be removed in version %{version}":[""],"Report is ready to download":[""],"%{cpus} CPUs and %{memory} memory":["%{cpus} CPU 및 %{memory} 메모리 "],"%{cores} Cores and %{memory} memory":["%{cores} 코어 및 %{memory} 메모리 "],"%{cpus} CPUs and %{memory} MB memory":["%{cpus} CPU 및 %{memory} MB 메모리 "],"Command must be array: %s":[""],"At least one command must be specified":[""],"Absolute command path must be specified: %s":[""],"Command %s not found or unreadable":[""],"Command %s not executable":[""],"Command %{cmd} returned %{status}":[""],"locale_name":["한국어"],"Proxied request failed with: %s\\n%s":[""],"Metric already registered: %s":[""],"Could not find %{migration_name} migration in %{destination}":[""],"IPv4 DNS record":[""],"IPv6 DNS record":[""],"Reverse IPv4 DNS record":[""],"Reverse IPv6 DNS record":[""],"hostname can contain only lowercase letters, numbers, dashes and dots according to RFC921, RFC952 and RFC1123":[""],"Websockify was not found":[""],"No free ports available for websockify, try again later":["websockify에 사용할 수 있는 포트가 없습니다. 나중에 다시 시도하십시오."],"New connection has been rejected with reason: %":[""],"New connection has been rejected":[""],"Disconnected":[""],"Connected":[""],"The connection was closed by the browser. please verify that the certificate authority is valid":[""],"Loading...":["로딩..."],"Error loading scheduler hint filters information: %s":[""],"Remove widget":[""],"Are you sure you want to delete this widget from your dashboard?":["이 위젯을 대시보드에서 삭제하시겠습니까?"],"Widget removed from dashboard.":["위젯이 대시보드에서 삭제되었습니다."],"Error removing widget from dashboard.":["대시보드에서 위젯을 삭제하는 도중 오류가 발생했습니다."],"Widget added to dashboard.":["위젯이 대시보드에 추가되었습니다."],"Error adding widget to dashboard.":["위젯을 대시보드에 추가하는 도중 오류가 발생했습니다."],"Widget positions successfully saved.":["위젯 위치를 저장했습니다."],"Failed to save widget positions.":["위젯 위치를 저장하지 못했습니다."],"There was an error listing VMs: %(status)s %(statusText)s":["VM을 나열하는 도중 오류가 발생했습니다: %(status)s %(statusText)s"],"Test connection was successful":["연결 테스트 성공"],"An error occurred while testing the connection: ":[""],"Revert template":[""],"Are you sure you would like to revert the Template?":[""],"Revert Failed, %s":[""],"Confirm":["확인"],"Filter...":["필터..."],"No data available in table":[""],"Showing %(start)s to %(end)s of %(total)s entries":[""],"Showing 0 to 0 of 0 entries":[""],"(filtered from %s total entries)":[""],"Show %s entries":[""],"Processing...":[""],"Search:":[""],"No matching records found":[""],"First":[""],"Last":[""],"Next":["다음"],"Previous":[""],": activate to sort column ascending":[""],": activate to sort column descending":[""],"Please select hosts to perform action on.":[""],"Single host is selected in total":[""],"Undo selection":[""],"Before you proceed to using Foreman you should provide information about one or more architectures.":["Foreman을 사용하기 전 하나 이상의 아키텍처에 대한 정보를 지정해야 합니다. "],"Each entry represents a particular hardware architecture, most commonly {x86_64} or {i386}. Foreman also supports the Solaris operating system family, which includes {sparc} based systems.":[""],"Each architecture can also be associated with more than one operating system and a selector block is provided to allow you to select valid combinations.":["각 아키텍처는 하나 이상의 운영 체제에 연결할 수 있고 유효한 조합을 선택할 수 있도록 선택자 블록이 제공됩니다."],"Request UUID":[""],"HTTP request UUID, clicking will filter audits for this request. It can also be used for searching in application logs.":[""],"Affected Organizations":[""],"Affected Locations":[""],"Filter audits for this user only":[""],"Logged-in":["로그인했습니다 "],"Filter audits for this resource only":[""],"Foreman can use LDAP based service for user information and authentication.":["Foreman은 사용자 정보 및 인증을 위해 LDAP 기반 서비스를 사용할 수 있습니다. "],"The authentication process currently requires an LDAP provider, such as {FreeIPA}, {OpenLDAP} or {Microsoft}.":[""],"Learn more about LDAP authentication in the documentation.":[""],"Foreman can use External service for user information and authentication.":[""],"Learn more about External authentication in the documentation.":[""],"Create LDAP Authentication Source":[""],"Clear":[""],"Press ' / ' to focus on search":[""],"name already exists":[""],"Bookmark was successfully created.":["북마크가 성공적으로 생성되었습니다. "],"Query":[""],"Create Bookmark":[""],"No data available":[""],"Manage columns":[""],"Select columns to display in the table.":[""],"Report Metrics":["보고서 메트릭스 "],"Total":["합계 "],"You don't seem to have any reports.":["보고서가 없습니다."],"If you wish to configure Puppet to forward its reports to Foreman, please follow {settingUpPuppetReports} and {emailReporting}":[""],"setting up reporting":["보고서 설정 중 "],"e-mail reporting":["이메일 보고서 "],"split":[""],"unified":[""],"Error during rendering, Return to Editor tab.":[""],"Host Fetch %s":[""],"Filter Host...":[""],"Editor":[""],"Changes":[""],"Preview":["미리 보기 "],"Select Host...":[""],"Preview is outdated.":[""],"Hide Content":[""],"Revert Local Changes":[""],"Import File":[""],"Maximize":[""],"Safemode":[""],"Syntax":[""],"Keybind":[""],"Theme":[""],"Autocompletion":[""],"Live Autocompletion":[""],"Click to log in again":[""],"Request Failed":[""],"Show distribution chart":["배포 차트 표시 "],"View Chart":[""],"Fact distribution chart - %s ":[""],"(%s host)":[""],"Failed to submit the request.":[""],"Review before build":[""],"Build enables host {hostName} to rebuild on next boot":[""],"This action will delete this host and all its data (i.e facts, report)":[""],"No errors detected":[""],"Host %s has been removed successfully":[""],"This will delete the VM and its disks. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"VM and its disks will not be deleted. This behavior can be changed via global setting \\\"Destroy associated VM on host delete\\\".":[""],"Delete host?":[""],"Delete host":[""],"Are you sure you want to delete host {host}? This action is irreversible. {cascade}":[""],"Host %s will be built next boot":[""],"Legacy UI":[""],"Recent audits":[""],"All audits":[""],"No Results found":[""],"Not available":[""],"Power Status":[""],"This will change the host power status, are you sure?":[""],"an error occurred: %s":[""],"Power has been set to \\\"%s\\\" successfully":[""],"Reboot":["다시 시작"],"Reset":[""],"IPv6 address":[""],"IPv4 address":[""],"MAC address":["MAC 주소"],"No host found":[""],"The host %s does not exist or there are access permissions needed. Please contact your administrator if this issue continues.":[""],"All hosts":["전체 호스트 "],"Recent communication":[""],"Host status":[""],"Manage all statuses":[""],"OK statuses":[""],"Warning statuses":[""],"Error statuses":[""],"N/A statuses":[""],"All statuses cleared":[""],"All statuses OK":[""],"No statuses to show":[""],"Clear host status":[""],"You are about to clear the %s status. Are you sure?":[""],"Manage host statuses":[""],"OS":["OS"],"Kernel release":[""],"Less than a second":[""],"seconds":["초"],"System properties":[""],"Copy to clipboard":[""],"Copied to clipboard":[""],"BIOS UUID":[""],"Owner type":[""],"Open in a new tab":[""],"View provisioning template {openTemplate}.":[""],"Safe mode on":[""],"Safe mode off":[""],"Collapse all cards":[""],"Expand all cards":[""],"No results found":[""],"Something went wrong":[""],"Loading":["로딩 중 "],"Delete report?":[""],"Delete report":[""],"Report was successfully deleted":[""],"There was some issue deleting the report: %s":[""],"Are you sure you want to delete this report? This action is irreversible.":[""],"Created %(date)s by %(owner)s":[""],"(updated %s)":[""],"Owned":[""],"Total: %s":[""],"Owned: %s":[""],"Host Status Overview":[""],"Any Organization":["모든 조직 "],"Any Location":["모든 위치 "],"You are impersonating another user, click to stop the impersonation":[""],"Confirm Action":[""],"You are about to stop impersonating other user. Are you sure?":[""],"Any organization":[""],"Any location":[""],"Manage Organizations":["조직 관리 "],"Manage Locations":["위치 관리 "],"Log in to your account":[""],"Password":["암호 "],"Log In":["로그인"],"Specified value is higher than maximum value %s":[""],"Specified value is higher than recommended maximum %s":[""],"Vendor class":["벤더 클래스 "],"Hardware model":[""],"Bookmark this search":["이 검색을 북마크 "],"Saved Bookmarks":[""],"Manage Bookmarks":["북마크 관리 "],"None provided":[""],"Create new":[""],"items":[""],"Items per page":[""],"per page":[""],"Go to first page":[""],"Go to previous page":[""],"Go to last page":[""],"Go to next page":[""],"Current page":[""],"Pagination":[""],"Weak":["취약함"],"Too short":[""],"Normal":["적절함"],"Strong":["강력함"],"Very strong":[""],"Verify":["확인 "],"Passwords do not match":[""],"Update value for %s setting":[""],"Setting updated.":[""],"Error updating setting":[""],"This setting is encrypted. Empty input field is displayed instead of the setting value.":[""],"Not set":[""],"Empty":[""],"This setting is defined in the configuration file %s and is read-only.":[""],"Default: %s":[""],"Copied!":[""],"Today":[""],"For more information please see ":[""],"documentation":[""],"There was a problem processing the request. Please try again.":[""],"To report an issue {clickHere}":[""],"click here":[""],"Return to last page":[""],"%s%% Complete":[""],"Available options":[""],"Chosen options":[""],"filter...":[""],"Specified value is higher than maximum value":[""],"Specified value is higher than recommended maximum":[""],"Error! ":[""],"Warning! ":[""],"Form was successfully created.":[""],"is too long (maximum is %s characters)":[""],"Select row":[""],"Disk name":[""],"Storage Pod":[""],"Data store":["데이터 저장소 "],"Disk Mode":[""],"Thin provision":["씬 프로비저닝"],"Eager zero":["사전 제로화"],"%(name)s (free: %(free)s, prov: %(prov)s, total: %(total)s)":[""],"Create SCSI controller":[""],"Add volume":[""],"Delete Controller":[""],"Add Controller":[""],"Your New Personal Access Token":[""],"Make sure to copy your new personal access token now. You won’t be able to see it again!":[""],"Cannot be in the past":[""],"Personal Access Token was successfully created.":[""],"Add Personal Access Token":[""],"Create Personal Access Token":[""],"Revoke personal access token":[""],"Do you really want to revoke Access Token?":[""],"Active Personal Access Tokens":[""],"Inactive Personal Access Tokens":[""],"Personal Access Tokens allow you to authenticate API requests without using your password, e.g. ":[""],"Token was successfully revoked.":[""],"Could not revoke Token: ":[""],"Revoked":[""],"Never":["사용 안 함"],"Expired":[""],"Last Used":[""],"Error submitting data:":[""],"Oh no! Something went wrong while submitting the form, the server returned the following error: %s":[""],"Hard disk":[""]," Documentation":[""],"Edit %s Resource Filter":[""],"Created role successfully":[""],"Edited role successfully":[""],"Selected role":["선택된 역할 "],"Override?":[""],"Filters inherit organizations and locations associated with the role by default. If override field is enabled, the filter can override the set of its organizations and locations. Later role changes will not affect such filter.After disabling the override field, the role organizations and locations apply again.":[""],"Unlimited?":["제한 없음?"],"If the unlimited field is enabled, the filter applies to all resources of the selected type. If the unlimited field is disabled, you can specify further filtering using Foreman search syntax in the search field. If the role is associated with organizations or locations, the filters are not considered unlimited as they are scoped accordingly.":[""],"Selected resource type does not support granular filtering, therefore you can't configure granularity":["선택된 리소스 유형은 세분화된 필터링을 지원하지 않기 때문에 단위를 설정할 수 없습니다 "],"Permission":["권한 "],"Resource Type":[""],"Hardware models":["하드웨어 모델 "],"Confirm Hardware Model Deletion":[""],"Hardware Model %s was successfully deleted":[""],"You are about to delete %s. Are you sure?":[""],"Nothing to select.":[""],"Initial configuration template":[""],"does not have assigned host_init_config template":[""],"No OS from host group":[""],"Generating ...":[""],"There was an error while generating the command, see the logs for more information.":[""],"Registration command":[""],"yes":["예"],"no":["no"],"Inherit from host parameter":[""],"Yes (override)":[""],"No (override)":[""],"Setup REX":[""],"Setup remote execution. If set to `Yes`, SSH keys will be installed on the registered host. The inherited value is based on the `host_registration_remote_execution` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level.":[""],"Setup Insights":[""],"If set to `Yes`, Insights client will be installed and registered on Red Hat family operating systems. It has no effect on other OS families that do not support it. The inherited value is based on the `host_registration_insights` parameter. It can be inherited e.g. from host group, operating system, organization. When overridden, the selected value will be stored on host parameter level.":[""],"Insecure":[""],"If the target machine does not trust the host SSL certificate, the initial connection could be subject to a man-in-the-middle attack. If you accept the risk and do not require the server authenticity to be verified, you can enable insecure argument for the initial curl. Note that all subsequent communication is then properly secured, because the initial request deploys the SSL certificate for the rest of the registration process.":[""],"Required for registration without subscription manager. Can be specified by host group.":[""],"Install packages":[""],"Packages to install on the host when registered. Can be set by `host_packages` parameter, example: `pkg1 pkg2`.":[""],"Repository":["리포지터리 "],"A repository to be added before the registration is performed. It can be useful to e.g. make the subscription-manager packages available for the purpose of the registration. For Red Hat and SUSE family distributions, this should be the URL of the repository, e.g. 'http://rpm.example.com/'. For Debian OS families, it's the whole list file content, e.g. 'deb http://deb.example.com/ buster 1.0'.":[""],"Repository GPG key URL":[""],"If packages are GPG signed, the public key can be specified here to verify the packages signatures. It needs to be specified in the ascii form with the GPG public key header.":[""],"Smart proxy":["스마트 프록시 "],"Only smart proxies with enabled `Templates` and `Registration` features are displayed.":[""],"If no organization is set, the default organization of the user is assumed.":[""],"Not specified":[""],"If no location is set, the default location of the user is assumed.":[""],"Token life time":[""],"Expiration of the authorization token.":[""],"hours":[""],"unlimited":[""],"Update packages":[""],"Advanced":[""],"There was an error while loading the data, see the logs for more information.":[""],"Return to the last page":[""],"Resource not found":[""],"Something went wrong and the resource does not exist or there are access permissions needed. Please, contact your administrator if this issue continues":[""],"No Results":[""],"must set host and port":["호스트 및 포트를 설정해야 합니다 "],"Connected to: %s":[""],"No documentation found":["문서를 찾을 수 없음"],"We have not found any documentation for your API.":["귀하의 API에 대한 문서를 찾을 수 없습니다. "],"Follow %{href} on how to describe your controllers.":["컨트롤러 설명 방법은 %{href}을(를) 따르십시오. "],"further instructions":["추가 지침 "],"Oops!!":["죄송합니다!"],"Resource %{res} not found.":["리소스 %{res}을(를) 찾을 수 없습니다."],"Method %{method} not found for resource %{resource}.":["리소스 %{resource}의 방식 %{method}을(를) 찾을 수 없습니다. "],"Try going to %{href}":["%{href}로 전환 시도 "],"%{app_name} API documentation homepage":["%{app_name} API 문서 홈페이지 "],"required":["필수 "],"optional":["옵션"],"nil allowed":["nil이 허용됩니다 "],"Param name":["매개 변수 이름 "],"Params":["매개 변수 "],"Metadata":["메타 데이터"],"Errors":["오류"],"Supported Formats":["지원되는 형식 "],"Please enable JavaScript to view the %{comments_href}.":["%{comments_href}을(를) 표시하기 위해 JavaScript를 활성화하십시오. "],"comments powered by %{disqus}":["%{disqus}에서 제공하는 코멘트 "],"API documentation":["API 문서 "],"Audited::Audit|Action":[""],"Audited::Audit|Associated name":[""],"Audited::Audit|Associated type":[""],"Audited::Audit|Auditable name":[""],"Audited::Audit|Auditable type":[""],"Audited::Audit|Audited changes":[""],"Audited::Audit|Comment":[""],"Audited::Audit|Remote address":[""],"Audited::Audit|Request uuid":[""],"Audited::Audit|User type":[""],"Audited::Audit|Username":[""],"Audited::Audit|Version":[""],"Auth source":["인증 소스 "],"AuthSource|Account":["계정 "],"AuthSource|Account password":["계정 암호 "],"AuthSource|Attr firstname":["속성 이름 "],"AuthSource|Attr lastname":["속성 성 "],"AuthSource|Attr login":["속성 로그인 "],"AuthSource|Attr mail":["속성 메일 "],"AuthSource|Attr photo":["속성 사진 "],"AuthSource|Base dn":["기본 DN"],"AuthSource|Groups base":["그룹 기반 "],"AuthSource|Ldap filter":["LDAP 필터 "],"AuthSource|Port":["포트 "],"AuthSource|Server type":["서버 유형 "],"AuthSource|Tls":["TLS"],"AuthSource|Use netgroups":[""],"AuthSource|Usergroup sync":[""],"Bookmark":["북마크 "],"Bookmark|Owner type":["소유자 유형 "],"Compute attribute":["컴퓨터 속성 "],"ComputeAttribute|Name":["이름 "],"ComputeAttribute|Vm attrs":["Vm 속성 "],"ComputeProfile|Name":["이름 "],"ComputeResource|Attrs":["속성 "],"ComputeResource|Caching enabled":[""],"ComputeResource|Description":["설명 "],"ComputeResource|Domain":[""],"ComputeResource|Password":["암호 "],"ComputeResource|Url":["URL"],"ComputeResource|User":["사용자 "],"ComputeResource|Uuid":["UUID"],"Domain|Name":["이름 "],"External usergroup":["외부 사용자 그룹 "],"ExternalUsergroup|Name":["이름 "],"Fact name":["정보 이름 "],"FactName|Ancestry":["상위 "],"FactName|Compose":["작성 "],"FactName|Name":["이름 "],"FactName|Short name":["약어 "],"Feature":["기능 "],"Feature|Name":["이름 "],"Filter|Taxonomy search":["분류 검색 "],"Foreman internal":[""],"ForemanInternal|Key":[""],"ForemanInternal|Value":[""],"Foreman register/registration facet":[""],"ForemanRegister::RegistrationFacet|Jwt secret":[""],"Host::Base|Build":["빌드 "],"Host::Base|Build errors":[""],"Host::Base|Certname":["인증서 이름 "],"Host::Base|Comment":["코멘트 "],"Host::Base|Disk":["디스크 "],"Host::Base|Enabled":["활성화됨 "],"Host::Base|Global status":[""],"Host::Base|Grub pass":["Grub 경로 "],"Host::Base|Image file":["이미지 파일 "],"Host::Base|Initiated at":[""],"Host::Base|Installed at":["설치 "],"Host::Base|Last compile":["마지막 컴파일 "],"Host::Base|Last report":["마지막 보고서 "],"Host::Base|Lookup value matcher":[""],"Host::Base|Managed":["관리 "],"Host::Base|Name":["이름 "],"Host::Base|Otp":["OTP"],"Host::Base|Owner type":["소유자 유형 "],"Host::Base|Provision method":["프로비저닝 방식 "],"Host::Base|Pxe loader":[""],"Host::Base|Root pass":["Root 경로 "],"Host::Base|Use image":["이미지 사용 "],"Host::Base|Uuid":["UUID"],"Host facets/base":[""],"HostFacets::Base|Boot time":[""],"HostFacets::Base|Cores":[""],"HostFacets::Base|Disks total":[""],"HostFacets::Base|Foreman instance":[""],"HostFacets::Base|Ram":[""],"HostFacets::Base|Sockets":[""],"HostFacets::Base|Virtual":[""],"Host status/status":[""],"HostStatus::Status|Reported at":[""],"HostStatus::Status|Status":[""],"Hostgroup|Ancestry":["상위 "],"Hostgroup|Description":[""],"Hostgroup|Grub pass":["Grub 경로 "],"Hostgroup|Image file":["이미지 파일 "],"Hostgroup|Lookup value matcher":[""],"Hostgroup|Pxe loader":[""],"Hostgroup|Root pass":["Root 경로 "],"Hostgroup|Title":["제목 "],"Hostgroup|Use image":["이미지 사용 "],"Hostgroup|Vm defaults":["Vm 기본값 "],"Http proxy":[""],"HttpProxy|Name":[""],"HttpProxy|Password":[""],"HttpProxy|Url":[""],"HttpProxy|Username":[""],"Image|Iam role":["Iam 역할 "],"Image|Password":["암호 "],"Image|User data":["사용자 데이터 "],"Jwt secret":[""],"JwtSecret|Token":[""],"Key pair":["키 쌍 "],"KeyPair|Name":["이름 "],"KeyPair|Public":["공개 "],"KeyPair|Secret":["비공개 "],"Lookup key":["검색 키 "],"LookupKey|Avoid duplicates":[""],"LookupKey|Description":["설명 "],"LookupKey|Hidden value":[""],"LookupKey|Key":["키 "],"LookupKey|Key type":["키 유형 "],"LookupKey|Lookup values count":["검색 값 수 "],"LookupKey|Merge default":[""],"LookupKey|Merge overrides":[""],"LookupKey|Omit":[""],"LookupKey|Override":["덮어쓰기 "],"LookupKey|Path":["경로 "],"LookupKey|Required":["필수 사항 "],"LookupKey|Validator rule":["검사기 규칙 "],"LookupKey|Validator type":["검사기 유형 "],"Lookup value":["검색 값 "],"LookupValue|Match":["일치 "],"LookupValue|Omit":[""],"LookupValue|Value":["값 "],"Mail notification":[""],"MailNotification|Default interval":[""],"MailNotification|Description":[""],"MailNotification|Mailer":[""],"MailNotification|Method":[""],"MailNotification|Name":[""],"MailNotification|Queryable":[""],"MailNotification|Subscriptable":[""],"MailNotification|Subscription type":[""],"Medium|Config path":["설정 경로 "],"Medium|Image path":["이미지 경로 "],"Medium|Media path":["미디어 경로 "],"Medium|Os family":["Os 제품군 "],"Message|Value":["값 "],"Model|Hardware model":["하드웨어 모델 "],"Model|Info":["정보 "],"Model|Name":["이름 "],"Model|Vendor class":["벤더 클래스 "],"Nic::Base|Attached devices":["할당된 장치 "],"Nic::Base|Attached to":["할당 대상 "],"Nic::Base|Attrs":["속성 "],"Nic::Base|Bond options":["본드 옵션 "],"Nic::Base|Compute attributes":[""],"Nic::Base|Identifier":["식별자 "],"Nic::Base|Ip":["IP"],"Nic::Base|Ip6":[""],"Nic::Base|Link":["링크 "],"Nic::Base|Mac":["MAC"],"Nic::Base|Managed":["관리"],"Nic::Base|Mode":["모드 "],"Nic::Base|Name":["이름 "],"Nic::Base|Password":["암호 "],"Nic::Base|Primary":[""],"Nic::Base|Provider":["공급자 "],"Nic::Base|Provision":[""],"Nic::Base|Tag":["태그"],"Nic::Base|Username":["사용자 이름"],"Nic::Base|Virtual":["가상 "],"Notification":[""],"Notification|Actions":[""],"Notification|Audience":[""],"Notification|Expired at":[""],"Notification|Message":[""],"Notification|Subject type":[""],"Notification blueprint":[""],"NotificationBlueprint|Actions":[""],"NotificationBlueprint|Expires in":[""],"NotificationBlueprint|Group":[""],"NotificationBlueprint|Level":[""],"NotificationBlueprint|Message":[""],"NotificationBlueprint|Name":[""],"Notification recipient":[""],"NotificationRecipient|Seen":[""],"Operatingsystem":["운영 체제 "],"Operatingsystem|Description":["설명 "],"Operatingsystem|Major":["메이저 "],"Operatingsystem|Minor":["마이너 "],"Operatingsystem|Name":["이름 "],"Operatingsystem|Nameindicator":["이름 표시기 "],"Operatingsystem|Password hash":["암호 해시 "],"Operatingsystem|Release name":["릴리즈 이름 "],"Parameter":["매개 변수 "],"Parameter|Hidden value":["숨겨진 값 "],"Parameter|Key type":[""],"Parameter|Priority":["우선 순위 "],"Parameter|Searchable value":[""],"Permission|Name":["이름 "],"Permission|Resource type":["리소스 유형 "],"Personal access token":[""],"PersonalAccessToken|Expires at":[""],"PersonalAccessToken|Last used at":[""],"PersonalAccessToken|Name":[""],"PersonalAccessToken|Revoked":[""],"PersonalAccessToken|Token":[""],"Realm|Realm type":["영역 유형 "],"Report":["보고서 "],"Report|Metrics":["메트릭스 "],"Report|Origin":[""],"Report|Reported at":["보고 "],"Report|Status":["상태 "],"Role|Builtin":["내장됨 "],"Role|Origin":[""],"Setting":["설정 "],"Setting|Category":["카테고리 "],"Setting|Default":["기본값 "],"Setting|Description":["설명 "],"Setting|Encrypted":[""],"Setting|Full name":[""],"Setting|Name":["이름 "],"Setting|Settings type":["설정 유형 "],"Setting|Value":["값 "],"SmartProxy|Expired logs":[""],"SmartProxy|Url":["Url"],"Smart proxy feature":[""],"SmartProxyFeature|Capabilities":[""],"SmartProxyFeature|Settings":[""],"Source":["소스 "],"Source|Value":["값 "],"Ssh key":[""],"SshKey|Fingerprint":[""],"SshKey|Key":[""],"SshKey|Length":[""],"SshKey|Name":[""],"Stored value":[""],"StoredValue|Expire at":[""],"StoredValue|Key":[""],"StoredValue|Value":[""],"Subnet|Boot mode":["부트 모드 "],"Subnet|Description":[""],"Subnet|Dns primary":["1차 DNS "],"Subnet|Dns secondary":["2차 DNS"],"Subnet|Externalipam group":[""],"Subnet|From":["시작 "],"Subnet|Gateway":["게이트웨이 "],"Subnet|Ipam":["Ipam"],"Subnet|Mask":["마스크 "],"Subnet|Mtu":[""],"Subnet|Nic delay":[""],"Subnet|Priority":["우선 순위 "],"Subnet|To":["종료 "],"Table preference":[""],"TablePreference|Columns":[""],"TablePreference|Name":[""],"Taxable taxonomy":["분류 텍소노미 "],"TaxableTaxonomy|Taxable type":["분류 유형 "],"Taxonomy":["텍소노미 "],"Taxonomy|Ancestry":["상위 "],"Taxonomy|Description":[""],"Taxonomy|Ignore types":["유형 무시 "],"Taxonomy|Title":["제목 "],"Template|Default":[""],"Template|Description":[""],"Template|Locked":[""],"Template|Name":[""],"Template|Os family":[""],"Template|Snippet":[""],"Template|Template":[""],"Template|Vendor":[""],"TemplateInput|Advanced":[""],"TemplateInput|Default":[""],"TemplateInput|Description":[""],"TemplateInput|Fact name":[""],"TemplateInput|Hidden value":[""],"TemplateInput|Input type":[""],"TemplateInput|Name":[""],"TemplateInput|Options":[""],"TemplateInput|Puppet class name":[""],"TemplateInput|Puppet parameter name":[""],"TemplateInput|Required":[""],"TemplateInput|Resource type":[""],"TemplateInput|Value type":[""],"TemplateInput|Variable name":[""],"Template kind":["템플릿 유형 "],"TemplateKind|Description":[""],"TemplateKind|Name":["이름 "],"Token|Expires":["만료 "],"Token|Value":["값 "],"Upgrade task":[""],"UpgradeTask|Always run":[""],"UpgradeTask|Last run time":[""],"UpgradeTask|Long running":[""],"UpgradeTask|Name":[""],"UpgradeTask|Ordering":[""],"UpgradeTask|Skip failure":[""],"UpgradeTask|Subject":[""],"UpgradeTask|Task name":[""],"User|Avatar hash":["아바타 해시 "],"User|Description":[""],"User|Disabled":[""],"User|Locale":["로케일 "],"User|Lower login":["Lower 로그인 "],"User|Mail enabled":["메일 활성화 "],"User|Password hash":["암호 해시 "],"User|Password salt":["암호 salt"],"User|Timezone":[""],"User mail notification":[""],"UserMailNotification|Interval":[""],"UserMailNotification|Last sent":[""],"UserMailNotification|Mail query":[""],"User role":["사용자 역할 "],"UserRole|Owner type":["소유자 유형 "],"Usergroup":["사용자 그룹 "],"Usergroup|Admin":["관리자 "],"Usergroup member":["사용자 그룹 멤버 "],"UsergroupMember|Member type":["멤버 유형 "],"Widget":[""],"Widget|Col":[""],"Widget|Data":[""],"Widget|Name":[""],"Widget|Row":[""],"Widget|Sizex":[""],"Widget|Sizey":[""],"Widget|Template":[""]}}};

Also available in: Unified diff