Project

General

Profile

Activity

From 02/05/2020 to 03/05/2020

03/05/2020

06:35 PM Bug #12646: Isolated Reverse proxy exposes all of Katello/Foreman
Hi there, any news about this "security hole"? Anthony Chevalet
04:21 PM Revision a9859de9 (puppet-foreman): Refs #28436 - Drop unused parameter
0e8621418b1eb3418066552945218cbad8d71f2d added this, but was a left over
from an earlier iteration.
Ewoud Kohl van Wijngaarden
04:02 PM Revision d3898585 (puppet-foreman): Use plugin_prefix to determine plugin packages
Previously this was duplicating the plugin prefix for packages that
didn't follow the convention. By using regsubst, ...
Ewoud Kohl van Wijngaarden
11:43 AM Feature #29069: label pulpcore ports with the right selinux label
This should be cherry picked into 2.0.0-rc3. Also needs an additional fix to install pulpcore-selinux before starting... Ewoud Kohl van Wijngaarden
11:42 AM Feature #28901: Support pulpcore db on remote hosts
This should be cherry picked into 2.0.0-rc3 Ewoud Kohl van Wijngaarden
11:42 AM Bug #28996: pulpcore 3.0.1 needs to have PULP_STATIC_ROOT set
This should be cherry picked into 2.0.0-rc3 Ewoud Kohl van Wijngaarden

03/04/2020

03:52 PM Bug #29262 (New): Consider storing installed flag on the scenario configuration instead of creating a file
See https://github.com/theforeman/foreman-installer/pull/479#pullrequestreview-368822007 Eric Helms
02:01 PM Feature #28922 (Closed): Switch Candlepin to listen on localhost and Katello to communicate via localhost
Applied in changeset commit:puppet-candlepin|191154f889974b609f6558f00af6f2bb1747f4ed. Eric Helms
01:34 PM Revision dae20b5f (puppet-katello): Refs #28922: Communicate via localhost to Candlepin
Eric Helms
01:03 PM Revision 191154f8 (puppet-candlepin): Fixes #28922: Deploy Candlepin on localhost by default
Eric Helms
01:01 PM Feature #29255 (Closed): Set Foreman plugin config file permissions to 0640
Applied in changeset commit:puppet-foreman|fb9f221d50553ec00496113f9a4d37ff4e5f149c. Ewoud Kohl van Wijngaarden
12:56 PM Revision fb9f221d (puppet-foreman): Fixes #29255 - Set plugin config file mode to 0640
This sets the config file mode to 0640 by default because they may
contain secrets such as credentials. To keep it re...
Ewoud Kohl van Wijngaarden
12:40 PM Revision 185ca82e (puppet-katello): Mark compatible with candlepin 9.x
Ewoud Kohl van Wijngaarden
12:18 PM Bug #29244 (Rejected): [installer][insights] This host is running httpd with SSLv3.0 enabled and is therefore vulnerable to POODLE / CVE-2014-3566
The host isn't actually listening on SSLv3, this is an insights bug.
https://github.com/theforeman/foreman-install...
Ewoud Kohl van Wijngaarden

03/03/2020

07:36 PM Revision 7e0a4767 (puppet-foreman): Correct casing on Stdlib::HTTPUrl
While Puppet is case insensitive on data types, Kafo does care. This
matches the type to its actual definition.
Ewoud Kohl van Wijngaarden
06:56 PM Revision 92b8934f (puppet-katello): Remove coupled expectation
The Exec[restart_foreman] resource is part of Foreman::Service when
Passenger is used. Since the default flipped, thi...
Ewoud Kohl van Wijngaarden
06:56 PM Revision 1c7b88ef (puppet-katello): Add transition to fixtures
puppet-pulp has started to depend on this. Ewoud Kohl van Wijngaarden
04:38 PM Feature #29255 (Ready For Testing): Set Foreman plugin config file permissions to 0640
The Foreman Bot
04:12 PM Feature #29255 (Closed): Set Foreman plugin config file permissions to 0640
Config files might contain secrets such as credentials. Therefore they shouldn't be world readable.
The katello co...
Ewoud Kohl van Wijngaarden
03:01 PM Feature #29052 (Closed): Drop upgrade flag
Applied in changeset commit:installer|481ee53f04cbcc98fea39bba1a9c2c388bf22f1c. Eric Helms
02:26 PM Revision 481ee53f (installer): Fixes #29052: Drop upgrade flag and treat all installer runs the same
Eric Helms
02:19 PM Revision e8f3f606 (puppet-candlepin): Bump version to 9.0.0
504ed85be6eabf3a9aa7d431093bda74adc4682e was a breaking change so the
version should reflect this. This forces module...
Ewoud Kohl van Wijngaarden
12:49 PM Bug #29240 (Resolved): Foreman 2.1 nightly installer error on postgresql 12
Elias Pereira
12:48 PM Bug #29240: Foreman 2.1 nightly installer error on postgresql 12
Elias Pereira wrote:
> Ewoud Kohl van Wijngaarden wrote:
> > Which wiki instructions? They should probably be remov...
Elias Pereira

03/02/2020

08:00 PM Bug #29240: Foreman 2.1 nightly installer error on postgresql 12
Ewoud Kohl van Wijngaarden wrote:
> Which wiki instructions? They should probably be removed and link to https://the...
Elias Pereira
07:38 PM Bug #29240: Foreman 2.1 nightly installer error on postgresql 12
Which wiki instructions? They should probably be removed and link to https://theforeman.org/manuals/1.24/index.html#2... Ewoud Kohl van Wijngaarden
07:35 PM Bug #29240: Foreman 2.1 nightly installer error on postgresql 12
Elias Pereira wrote:
> Ewoud Kohl van Wijngaarden wrote:
> > Can you share which OS and which repositories are enab...
Elias Pereira
03:06 PM Bug #29240: Foreman 2.1 nightly installer error on postgresql 12
Ewoud Kohl van Wijngaarden wrote:
> Can you share which OS and which repositories are enabled?
For sure!! Sorry f...
Elias Pereira
02:33 PM Bug #29240 (Need more information): Foreman 2.1 nightly installer error on postgresql 12
Can you share which OS and which repositories are enabled? Ewoud Kohl van Wijngaarden
01:34 PM Bug #29240 (Resolved): Foreman 2.1 nightly installer error on postgresql 12
I'm trying to install foreman 2.1 nightly, but the below error happens.... Elias Pereira
07:01 PM Bug #29244 (Ready For Testing): [installer][insights] This host is running httpd with SSLv3.0 enabled and is therefore vulnerable to POODLE / CVE-2014-3566
The Foreman Bot
06:57 PM Bug #29244 (Rejected): [installer][insights] This host is running httpd with SSLv3.0 enabled and is therefore vulnerable to POODLE / CVE-2014-3566
Cloned from https://bugzilla.redhat.com/show_bug.cgi?id=1795550
*Description of problem:*
Fresh installation of ...
Eric Helms
05:01 PM Bug #29243 (Ready For Testing): New install message shown every time
The Foreman Bot
04:58 PM Bug #29243 (Closed): New install message shown every time
Eric Helms
03:59 PM Bug #29242 (New): Set default log level to info
Eric Helms
03:55 PM Bug #29241 (New): Installer should show progress bar for all hooks
Eric Helms

02/28/2020

07:31 PM Revision 7b00793a (puppet-pulpcore): Refs #28901 - Fix settings.py.erb
Rafael Guerra Cavalcanti
06:01 PM Bug #29220 (Closed): disable CertificateRevocationListTask job in candlepin.conf by default
Applied in changeset commit:puppet-candlepin|504ed85be6eabf3a9aa7d431093bda74adc4682e. Eric Helms
01:25 AM Bug #29220 (Ready For Testing): disable CertificateRevocationListTask job in candlepin.conf by default
The Foreman Bot
01:18 AM Bug #29220 (Closed): disable CertificateRevocationListTask job in candlepin.conf by default
Cloned from https://bugzilla.redhat.com/show_bug.cgi?id=1784341
*Description of problem:*
CertificateRevocationL...
Eric Helms
05:48 PM Revision 504ed85b (puppet-candlepin): Fixes #29220: Disable CRL generation by default
Eric Helms
05:18 PM Revision 8bc1ba30 (puppet-foreman): Fixes #29148 - Use Puma instead of Passenger by default
Suresh Thirugnanasambandan
01:01 PM Feature #28436 (Closed): Add Keycloak authentication support
Applied in changeset commit:puppet-foreman|0e8621418b1eb3418066552945218cbad8d71f2d. Ewoud Kohl van Wijngaarden
12:37 PM Revision 0e862141 (puppet-foreman): Fixes #28436 - Add keycloak support
This adds support for keycloak when using the
keycloak-httpd-client-install command. A more native integration would
...
Ewoud Kohl van Wijngaarden

02/27/2020

10:01 PM Refactor #29208 (Closed): Remove custom error methods in favor of fail_and_exit
Applied in changeset commit:installer|cb9a1fed3bfd5e35b8a2048e6e9bf0ee7cd65530. Ewoud Kohl van Wijngaarden
04:02 PM Refactor #29208 (Ready For Testing): Remove custom error methods in favor of fail_and_exit
The Foreman Bot
04:01 PM Refactor #29208 (Closed): Remove custom error methods in favor of fail_and_exit
The fail_and_exit method has been introduced as a shared method for all hooks, but not all hooks use this. Ewoud Kohl van Wijngaarden
09:36 PM Revision cb9a1fed (installer): Fixes #29208 - Use fail_and_exit where possible
This replaces various custom definition of the error method with the
central fail_and_exit.
Ewoud Kohl van Wijngaarden
08:52 PM Feature #29218 (Resolved): puppet-xinetd should run on el8
https://forge.puppet.com/puppetlabs/xinetd/readme
https://github.com/puppetlabs/puppetlabs-xinetd
William Clark
08:48 PM Feature #29217 (Assigned): puppet-tftp should run on el8
William Clark
08:48 PM Feature #29217 (Closed): puppet-tftp should run on el8
William Clark
08:45 PM Feature #29216 (Resolved): puppet-systemd should run on el8
https://forge.puppet.com/camptocamp/systemd/readme
https://github.com/camptocamp/puppet-systemd
William Clark
08:36 PM Feature #29215 (Closed): puppet-katello should run on el8
William Clark
08:36 PM Feature #29214 (Assigned): puppet-foreman_proxy_content should run on el8
William Clark
08:28 PM Feature #29214 (Closed): puppet-foreman_proxy_content should run on el8
William Clark
08:28 PM Feature #29213 (Closed): puppet-foreman_proxy should run on el8
William Clark
08:26 PM Feature #29212 (Closed): puppet-foreman should run on el8
William Clark
08:21 PM Feature #29211 (Closed): puppet-extlib should run on el8
William Clark
08:18 PM Feature #29210 (Closed): puppet-dns should run on el8
William Clark

02/26/2020

09:19 PM Feature #29198: puppet-dhcp should run on el8
William Clark wrote:
> This is supported as of version v4.0.0 (Feb 24th, 2020):
>
> https://forge.puppet.com/pupp...
William Clark
07:55 PM Feature #29198 (Closed): puppet-dhcp should run on el8
This is supported as of version v4.0.0 (Feb 24th, 2020):
https://forge.puppet.com/puppet/dhcp/changelog
Other m...
William Clark
05:05 PM Refactor #29184 (Ready For Testing): Make cdn_ssl_version a Setting
The Foreman Bot
02:50 PM Refactor #29184 (Closed): Make cdn_ssl_version a Setting
Currently the SSL version used to talk to the CDN can be set via cdn_ssl_version. This exists for proxies that don't ... Chris Roberts
04:20 PM Feature #29196: puppet-concat should run on el8
I'd disagree that we should require at least 6.2.0 in modules. Modules can work just fine with older versions.
A m...
Ewoud Kohl van Wijngaarden
04:07 PM Feature #29196 (Resolved): puppet-concat should run on el8
Centos8 should be supported as of v6.2.0:
https://forge.puppet.com/puppetlabs/concat/changelog
Any modules requ...
William Clark
04:05 PM Feature #29195 (Closed): puppet-certs should run on el8
William Clark
04:03 PM Feature #29194 (Closed): puppet-candlepin should run on el8
William Clark
04:02 PM Feature #29192 (Resolved): puppet-apache should run on el8
Centos8 should be supported by v5.3.0 and later:
https://forge.puppet.com/puppetlabs/apache/changelog
Any modul...
William Clark
03:29 PM Feature #29190 (Closed): puppet-pulpcore should run on el8
William Clark
03:28 PM Tracker #29189 (Resolved): installer puppet modules should run on el8
Each puppet module dependency of the foreman-installer will need to be tested and updated for el8 compatibility. This... William Clark
03:04 PM Bug #29187 (New): Create /EFI/BOOT -> /grub2 symlink within TFTP directory
In order to better comply with what's expected in grub2, we need to create this relative symlink in the TFTP directory. Lukas Zapletal
03:02 PM Bug #29186 (New): Use grub2 from grub2-efi-x64-cdboot package on Red Hats
We copy grub2 file from grub2-efi-x64 package but we should be using grub2-efi-x64-cdboot (file /boot/efi/EFI/centos/... Lukas Zapletal
01:01 PM Bug #28903 (Closed): Foreman 2.0 nightly installer shows errors when a package can't be installed but doesn't fail
Applied in changeset commit:installer|72d7c3f67fd4e1b131871c946d03808c9d26a124. Ewoud Kohl van Wijngaarden
12:58 PM Revision 72d7c3f6 (installer): Fixes #28903 - Stop installer when package install fails
The puppet resource command always exits with code 0, even when the
package failed to install. This approach uses pup...
Ewoud Kohl van Wijngaarden
02:03 AM Feature #28695 (Closed): Support pulp3 upgrade/migration
Eric Helms
02:02 AM Tracker #28736 (Closed): Use Pulp 3 for File and Container content in Katello
Eric Helms
01:58 AM Revision f78dba6d (puppet-pulp): Refs #29052: Stop services before running database migrations
Eric Helms

02/25/2020

11:01 PM Bug #29097 (Closed): Installer prints out puppet-agent-oauth on most runs
Applied in changeset commit:installer|44591b97fe11bcb8c55af88309166aab0fa4ac2c. Eric Helms
10:55 PM Revision 44591b97 (installer): Fixes #29097: Move puppet-agent-oauth reinstall to Foreman hooks
Eric Helms
02:08 PM Bug #27568 (New): changing ssl certificates only for web access
Chris Roberts
02:07 PM Bug #27568: changing ssl certificates only for web access
Hi Alex,
I tried a few things and am unable to get the parser to read the cert correctly. I am making this a valid...
Chris Roberts
04:01 AM Feature #29069 (Closed): label pulpcore ports with the right selinux label
Applied in changeset commit:puppet-pulpcore|79d7a55aaabaa8cef6ad62a4d77d477787a4de6b. William Clark
03:20 AM Revision 79d7a55a (puppet-pulpcore): Fixes #29069 - Apply selinux labels to pulpcore ports
William Clark
02:01 AM Feature #28839 (Closed): Reset Pulp 3 during foreman-installer --reset
Applied in changeset commit:installer|b9eb2179610ab62bae33b7c60cd53c99c01a9f97. Anonymous
01:29 AM Revision b9eb2179 (installer): Fixes #28839 - Reset pulpcore db with reset
Samir Jha

02/24/2020

08:36 PM Revision c0425866 (installer): Sort answer files and add headers
Kafo always adds this header so this keeps the diff smaller. Ewoud Kohl van Wijngaarden
07:02 PM Revision f528c342 (installer): Sort Rubocop rules
Michael Moll

02/21/2020

08:28 PM Revision 8a6fd459 (puppet-foreman_proxy_content): Fixes #28901 - Support SSL connection for external Pulpcore PostgreSQL database
William Clark
11:40 AM Revision 22d6a20f (installer): Refs #28915 - Only run upgrade if the installer ran
If the user passed in --noop, no upgrade should take place. When the
install failed, there's also no point in running...
Ewoud Kohl van Wijngaarden

02/20/2020

08:35 PM Bug #29097 (Ready For Testing): Installer prints out puppet-agent-oauth on most runs
The Foreman Bot
08:33 PM Bug #29097 (Closed): Installer prints out puppet-agent-oauth on most runs
Eric Helms
08:33 PM Bug #28903 (Ready For Testing): Foreman 2.0 nightly installer shows errors when a package can't be installed but doesn't fail
The Foreman Bot
07:57 PM Bug #27637: qpidd fails to start with ncat > 6.40
The source is at https://github.com/theforeman/puppet-qpid/blob/master/templates/wait-for-port.conf.erb and a patch i... Ewoud Kohl van Wijngaarden
07:04 PM Revision f36d351a (puppet-pulpcore): Refs #28901 - Support SSL connection for external postgresql database
William Clark
06:18 PM Feature #29095 (New): Switch Candlepin to deploy using APR connector
The APR connector for Tomcat implement the Apache Portable Runtime interface. Unlike other Tomcat interfaces, this on... Eric Helms
06:10 PM Revision ef0d8745 (puppet-foreman_proxy): Update the compatibility matrix in the README
This makes it clear that 13.x is Foreman Proxy 2.0 only. Ewoud Kohl van Wijngaarden

02/19/2020

08:19 PM Revision 94e03d58 (puppet-foreman): Fixes #28955 Add puma configuration tuning options
Suresh Thirugnanasambandan
07:51 PM Feature #29075 (Closed): Enable pulp_rpm plugin for pulpcore
We need to enable pulp_rpm plugin in the pulpcore module to install it on dev/nightly. Samir Jha
04:02 PM Feature #29069 (Closed): label pulpcore ports with the right selinux label
this needs to happen in puppet-pulpcore based on the ports configured there
see https://github.com/pulp/pulpcore-s...
Evgeni Golov
03:03 PM Bug #29068 (Resolved): install and configure pulp3 by default for the development install for file and container content
For a dev install we need file and container content enabled by default on pulp3 Justin Sherrill
01:01 PM Bug #28739 (Closed): Puma based deployments are not caching static assets
Applied in changeset commit:puppet-foreman|6a02be6e8faecb4210f16a8a5aea37397bfe3f74. Eric Helms
01:01 PM Bug #27848 (Closed): foreman-proxy http port 8000 within katello is enabled while it should be disabled by default
Applied in changeset commit:installer|05ad2405e8683767f786e5591ea1d1c9ec5c8b6f. Ewoud Kohl van Wijngaarden
01:01 PM Feature #29054 (Closed): Switch to only run Pulp migrations when there are pending migrations
Applied in changeset commit:puppet-pulp|1300985bfa981738afbd9f9895581d8753d65b80. Eric Helms
12:50 PM Revision 05ad2405 (installer): Fixes #27848 - Disable HTTP by default on Katello's proxy
The HTTP and templates features are useful when a host needs to be
provisioned and can't reach the Foreman server dir...
Ewoud Kohl van Wijngaarden
12:46 PM Revision 6a02be6e (puppet-foreman): Fixes #28739: Fix static asset caching when using Puma
Eric Helms
12:44 PM Revision 1300985b (puppet-pulp): Fixes #29054: Run pulp migrations if any are pending
Eric Helms
02:12 AM Revision f6dda3ec (puppet-katello): Refs #29039 - Use foreman's Apache config standalone (#324)
* Refs #29039 - Use foreman's Apache config standalone
By using only the Apache config, it's possible to use the Apa...
Ewoud Kohl van Wijngaarden

02/18/2020

07:37 PM Revision 386a1acc (puppet-foreman_proxy_content): Refs #29039 - Use loose coupling to Foreman's Apache config
By only including the Apache config, we get only what we really need. Ewoud Kohl van Wijngaarden
07:37 PM Revision e3ca6f90 (puppet-foreman_proxy_content): Use a single Apache fragment
Ewoud Kohl van Wijngaarden
06:01 PM Refactor #29039 (Closed): Make foreman::config::apache a standalone class
Applied in changeset commit:puppet-foreman|8af63b8486dfccc9f2488d7165f027c34fd90f75. Ewoud Kohl van Wijngaarden
06:01 PM Feature #28915 (Closed): Always run foreman upgrade tasks as a post hook
Applied in changeset commit:installer|ba994b6218c597fcd1058da1ff2c0970745ccb9f. Eric Helms
05:56 PM Revision 508aca84 (puppet-foreman_proxy_content): Refs #28901 - support external postgres database in pulpcore
William Clark
05:46 PM Revision 8af63b84 (puppet-foreman): Fixes #29039 - Make foreman::config::apache standalone
By not relying on the foreman class parameters, it becomes easier to use
this class without Foreman. This can be usef...
Ewoud Kohl van Wijngaarden
05:46 PM Revision ba994b62 (installer): Fixes #28915: Always run foreman upgrade rake tasks in post hooks
Eric Helms
04:10 PM Feature #29052 (Ready For Testing): Drop upgrade flag
The Foreman Bot
02:07 PM Feature #29052 (Closed): Drop upgrade flag
Eric Helms
04:07 PM Feature #29054 (Ready For Testing): Switch to only run Pulp migrations when there are pending migrations
The Foreman Bot
04:05 PM Feature #29054 (Closed): Switch to only run Pulp migrations when there are pending migrations
Eric Helms
04:01 PM Feature #29005 (Closed): Provision a DNS server on IPv6-only
Applied in changeset commit:puppet-foreman_proxy|fecf9c8b8bc3a50bdc0ace5e96840fae90c9d240. Ewoud Kohl van Wijngaarden
03:20 PM Revision 7cfe55cd (puppet-foreman_proxy): Refs #29005 - Require theforeman/dns 7.x
fecf9c8b8bc3a50bdc0ace5e96840fae90c9d240 started to depend on parameters
only present in 7.0.0, but was merged before...
Ewoud Kohl van Wijngaarden
03:17 PM Revision fecf9c8b (puppet-foreman_proxy): Fixes #29005 - Make IPv4 optional in proxydns
Ewoud Kohl van Wijngaarden
11:53 AM Feature #27069: Implement initial EL8 support
This didn't make the cut for 2.0. Tomer Brisker

02/17/2020

11:51 PM Revision e8956afd (puppet-pulpcore): fixup admin spec
William Clark
10:15 PM Bug #29041 (Ready For Testing): Update Puma default workers from 5 to 2 in the devel scenario
The Foreman Bot
10:14 PM Bug #29041 (Closed): Update Puma default workers from 5 to 2 in the devel scenario
To sync with https://github.com/theforeman/foreman/pull/7421/files Suresh Thirugnanasambandan
09:54 PM Refactor #29039 (Ready For Testing): Make foreman::config::apache a standalone class
The Foreman Bot
04:58 PM Refactor #29039 (Closed): Make foreman::config::apache a standalone class
By making the class standalone, it is easier to use it in other parts of the installer. It's also easier to test. Ewoud Kohl van Wijngaarden
08:01 PM Bug #28996 (Closed): pulpcore 3.0.1 needs to have PULP_STATIC_ROOT set
Applied in changeset commit:puppet-pulpcore|236e4d2e24ad7b199e33a9137629a2be3c76c8d8. William Clark
07:50 PM Revision 236e4d2e (puppet-pulpcore): Fixes #28996 - Set PULP_STATIC_ROOT
William Clark
03:48 PM Bug #28743 (Closed): Installer throws undefined method `param_value'
This was an issue in nightly that I believe has since been resolved. If not, please reopen. Ewoud Kohl van Wijngaarden
09:16 AM Bug #27637: qpidd fails to start with ncat > 6.40
It can be easily fixed with:... Kamil Maslowski

02/13/2020

05:14 PM Feature #29005 (Ready For Testing): Provision a DNS server on IPv6-only
The Foreman Bot
05:14 PM Feature #29005 (Closed): Provision a DNS server on IPv6-only
Currently the DNS deployment is tied to IPv4-only without IPv6 support. It should be possible to deploy on servers wi... Ewoud Kohl van Wijngaarden
04:45 PM Refactor #29004 (New): Move all Puppet forge modules from katello/* to theforeman/*
This means updating the modules' metadata to the new locations and doing releases.
It is also possible to mark mod...
Ewoud Kohl van Wijngaarden
04:37 PM Revision e4b56a04 (installer): Update pulpcore to theforeman org
The module was released to theforeman rather than katello. When pinning
modules this breaks.
Ewoud Kohl van Wijngaarden
12:45 PM Revision df607e55 (installer): Use a more expressive rspec test syntax
This results in a more readable failure:
1) Puppet module mymodule should support Puppet 6.0.0
Failure/Er...
Ewoud Kohl van Wijngaarden
12:26 PM Revision b3347f51 (puppet-pulpcore): Release 0.1.0
Ewoud Kohl van Wijngaarden
11:46 AM Revision 66445cdc (installer): bump version to 2.1-develop
Tomer Brisker

02/12/2020

09:15 PM Revision 678fbedd (puppet-dhcp): Release 5.1.1
Ewoud Kohl van Wijngaarden
08:57 PM Revision e314bd75 (puppet-foreman): Release 14.0.0
Ewoud Kohl van Wijngaarden
08:46 PM Revision 4e129e3b (puppet-foreman_proxy_content): Release 10.0.0
Ewoud Kohl van Wijngaarden
08:46 PM Revision 2d7ac6da (puppet-foreman_proxy_content): Depend on katello/pulp 7.x
pulp 7.x moves files and locations around to not conflict with Pulp 3. Ewoud Kohl van Wijngaarden
08:46 PM Revision 85f787fe (puppet-foreman_proxy_content): Depend on theforeman/foreman_proxy 13.x
0894d60f13182620b35a002cca137a09ef3a7864 started to depend on
foreman_proxy 13.x
Ewoud Kohl van Wijngaarden
08:45 PM Revision 2232de23 (puppet-katello): Release 13.0.0
Ewoud Kohl van Wijngaarden
08:41 PM Revision ca86bcc0 (puppet-katello): Allow katello/candlepin 8.x and katello/pulp 7.x
Ewoud Kohl van Wijngaarden
08:39 PM Revision ebead26d (puppet-katello): Require theforeman/foreman 14.x
94179dd22a05840eb2436eb8110fb2c4b9617fad started to depend on the
dynflow workers only present in 14.x
Ewoud Kohl van Wijngaarden
08:27 PM Tracker #28999 (Closed): Deploy Foreman with Puma as the application server by default
Eric Helms
06:19 PM Revision 25b95525 (puppet-foreman_proxy): Release 13.0.0
Ewoud Kohl van Wijngaarden
06:02 PM Revision 9a85ed9c (puppet-foreman_proxy): Allow new major versions of modules
Ewoud Kohl van Wijngaarden
06:02 PM Revision 065fb772 (puppet-foreman_proxy): Use https:// in the source URL
Ewoud Kohl van Wijngaarden
05:53 PM Revision 0736bac0 (puppet-pulp): Match the metadata author case to the module name
This is required by puppet-blacksmith and also matches the forge
metadata name.
Ewoud Kohl van Wijngaarden
05:43 PM Revision 1a3f465f (puppet-candlepin): Release 8.0.0
Ewoud Kohl van Wijngaarden
05:43 PM Revision c885f255 (puppet-candlepin): Match the metadata author case to the module name
This is required by puppet-blacksmith and also matches the forge
metadata name.
Ewoud Kohl van Wijngaarden
05:14 PM Feature #27038 (Duplicate): configure Pulp 3 to use the correct header for REMOTE_USER
Looks like this wasn't tracked in the main tracker (#28736) and missed. However, as part of #28904 this has already b... Ewoud Kohl van Wijngaarden
04:33 PM Bug #28996 (Closed): pulpcore 3.0.1 needs to have PULP_STATIC_ROOT set
As part of an SELinux related bugfix[0], the default value of PULP_STATIC_ROOT has changed from /var/lib/pulp/static/... Dennis Kliban
04:15 PM Revision e48f6a19 (puppet-pulp): Release 7.0.0
Ewoud Kohl van Wijngaarden
03:53 PM Revision 0c3f12a0 (puppet-foreman): Drop foreman::config::passenger::fragment
8828a108029ff945311dd7ae3113ef9d125d3934 introduced
foreman::config::apache::fragment and deprecated the passenger ve...
Ewoud Kohl van Wijngaarden
03:38 PM Revision 6746ff67 (puppet-foreman): Set ssl_verify_client parameter in tests
109c813f7b22d0b763a6e0b257721c0abcff7c8e failed to include this causing
tests to fail.
Ewoud Kohl van Wijngaarden
02:29 PM Revision ae3c9cc8 (puppet-puppet): Release 13.0.0
Ewoud Kohl van Wijngaarden
02:01 PM Bug #28930 (Closed): PostgreSQL upgrade breaks if an extension is installed
Applied in changeset commit:installer|864ee234fa04a924b77a051c775ce58efd4acbdd. Eric Helms
01:07 PM Revision 6d9713cd (puppet-puppet): Add redis as a fixture
Foreman now depends on Redis for the RedisUrl type Ewoud Kohl van Wijngaarden
01:04 PM Revision 864ee234 (installer): Fixes #28930: Install SCL postgresql-contrib if postgresql-contrib present
Eric Helms
02:47 AM Revision f26f5e5a (puppet-qpid): Match author case in metadata
puppet-blacksmith assumes the author and the module name match case.
This also matches to the actual forge username.
Ewoud Kohl van Wijngaarden

02/11/2020

11:50 PM Revision d4692522 (puppet-pulpcore): Refs #28901 - add setting postgresql_db_user
William Clark
08:07 PM Revision bcd07e68 (puppet-foreman_proxy_content): Refs #28720 - connect to mongo for content migrations
William Clark
07:48 PM Revision 109c813f (puppet-foreman): Allow configuring SSLVerifyClient instead of hardcore
Closes GH-743 Jeroen Hooyberghs
07:31 PM Revision 1d5fb117 (puppet-git): Release 6.0.2
Ewoud Kohl van Wijngaarden
06:07 PM Revision 67e9ae35 (puppet-qpid): Release 6.1.0
Ewoud Kohl van Wijngaarden
06:06 PM Bug #28930 (Ready For Testing): PostgreSQL upgrade breaks if an extension is installed
The Foreman Bot
05:34 PM Revision f9ba7508 (puppet-dns): Release 7.0.0
Ewoud Kohl van Wijngaarden
04:54 PM Revision 448c052a (puppet-certs): Release 7.0.0
Ewoud Kohl van Wijngaarden
04:48 PM Revision 4d119ee0 (puppet-tftp): Release 5.0.2
Ewoud Kohl van Wijngaarden
04:01 PM Bug #28983 (Closed): foreman_proxy_content::reverse_proxy::proxy_pass_params doesn't allow integers
Applied in changeset commit:puppet-foreman_proxy_content|e5a0518209b8f5592d68d0860d1cc54217e79568. Ewoud Kohl van Wijngaarden
02:35 PM Bug #28983 (Ready For Testing): foreman_proxy_content::reverse_proxy::proxy_pass_params doesn't allow integers
The Foreman Bot
02:33 PM Bug #28983 (Closed): foreman_proxy_content::reverse_proxy::proxy_pass_params doesn't allow integers
#27687 added this parameter, but when specifying values like TTL via hiera they end up as integers unless explicitly ... Ewoud Kohl van Wijngaarden
03:59 PM Revision e5a05182 (puppet-foreman_proxy_content): Fixes #28983 - Allow integers for $proxy_pass_params
f95a6eef1d510e65e2499367d738935b151cd05c added a parameter to allow
setting parameters to proxy_pass but only accepte...
Ewoud Kohl van Wijngaarden
02:01 PM Bug #28934 (Closed): Install postgresql12 SCL package for devel scenario to avoid SELinux issues
Applied in changeset commit:installer|047b0ba6aa866fe351f40f8a10edf8be863d84af. Eric Helms
01:33 PM Revision 047b0ba6 (installer): Fixes #28934: Install rh-postgresql12 in devel scenario
Eric Helms
12:22 PM Revision e077f41b (installer): Refs #28928 - Remove checkpoint_segments from tuning
The checkpoint_segments setting no longer exists since PostgreSQL 10 and
the server fails to start up if it's present...
Ewoud Kohl van Wijngaarden

02/10/2020

08:43 PM Revision 3e3cb319 (puppet-pulpcore): Verify everything to have documented parameters
Ewoud Kohl van Wijngaarden
08:18 PM Revision 9bcbcf74 (puppet-pulpcore): Refs #28720 - Fixup migration variables and template
William Clark
07:01 PM Feature #28901 (Closed): Support pulpcore db on remote hosts
Applied in changeset commit:puppet-pulpcore|752adcf0015c7d6111ee86ce18857c3a0d91a464. William Clark
06:55 PM Revision 752adcf0 (puppet-pulpcore): Fixes #28901 - support external postgresql
William Clark
04:50 PM Bug #28902: Foreman 2.0 nightly installation fails on RHEL-7.7
The root cause of this is that the PostgreSQL 12 and Redis 5 SCLs are not available. Then #28903 further complicates ... Ewoud Kohl van Wijngaarden

02/09/2020

03:46 PM Bug #28964 (Duplicate): Foreman proxy realm plugin missing xmlrpc -- needs to install rh-ruby25-rubygem-xmlrpc
Eric Helms

02/07/2020

07:13 PM Feature #28961 (Ready For Testing): Remove Pulp 2 as a backend for Katello
The Foreman Bot
07:11 PM Feature #28961 (Duplicate): Remove Pulp 2 as a backend for Katello
Eric Helms
03:04 AM Bug #28954: Add Puma Configuration
Duplicate of https://projects.theforeman.org/issues/28955 Suresh Thirugnanasambandan
01:23 AM Revision ccdd3573 (puppet-pulpcore): Refs #28720 - move migration params into migration plugin
William Clark

02/06/2020

10:27 PM Bug #28954 (Ready For Testing): Add Puma Configuration
The Foreman Bot
10:21 PM Bug #28954 (Duplicate): Add Puma Configuration
Add Puma configuration to foreman. This has two tasks:
1. Adding baseline configuration file to foreman core (for...
Suresh Thirugnanasambandan

02/05/2020

01:26 PM Bug #28934 (Ready For Testing): Install postgresql12 SCL package for devel scenario to avoid SELinux issues
The Foreman Bot
01:23 PM Bug #28934 (Closed): Install postgresql12 SCL package for devel scenario to avoid SELinux issues
Eric Helms
10:41 AM Bug #28930 (Closed): PostgreSQL upgrade breaks if an extension is installed
When using the PostgreSQL database for PuppetDB, an extension in installed. If postgresql-contrib is installed, rh-po... Ewoud Kohl van Wijngaarden
10:21 AM Bug #28928 (Ready For Testing): checkpoint_segments in PostgreSQL config breaks upgrades
The Foreman Bot
10:17 AM Bug #28928 (Closed): checkpoint_segments in PostgreSQL config breaks upgrades
When running the upgrade the following shows up:... Ewoud Kohl van Wijngaarden
 

Also available in: Atom